Setup and Configuration

4 Setup and Configuration

Note	The Jakarta EE Specification process provides for any number of compatible implementations. As additional implementations become available, refer to project or product documentation from those vendors for specific TCK setup and operational guidance.

This chapter describes how to set up the Jakarta Mail TCK and JavaTest harness software. Before proceeding with the instructions in this chapter, be sure to install all required software, as described in Chapter 3, "Installation."

After completing the instructions in this chapter, proceed to Chapter 5, "Executing Tests," for instructions on running the Jakarta Mail TCK.

4.1 Configuring Your Environment to Run the TCK Against the Compatible Implementation

After configuring your environment as described in this section, continue with the instructions in Section 4.4, "Using the JavaTest Harness Software."

Note

In these instructions, variables in angle brackets need to be expanded for each platform. For example, <TS_HOME> becomes $TS_HOME on Solaris/Linux and %TS_HOME% on Windows. In addition, the forward slashes (/) used in all of the examples need to be replaced with backslashes (\) for Windows. Finally, be sure to use the appropriate separator for your operating system when specifying multiple path entries (; on Windows, : on UNIX/Linux).

On Windows, you must escape any backslashes with an extra backslash in path separators used in any of the following properties, or use forward slashes as a path separator instead.

Set the following environment variables in your shell environment:
1. JAVA_HOME to the directory in which Java SE 8 is installed
2. ANT_HOME to the directory in which Apache Ant 1.10.0+ is installed
3. TS_HOME to the directory in which the Jakarta Mail TCK 2.0 software is installed
4. JARPATH to the directory in which the Jakarta Mail 2.0 CI has been installed
5. PATH to include the following directories: JAVA_HOME/bin and ANT_HOME/bin
Edit your <TS_HOME>/lib/ts.jte file and set the following environment variables:
1. Set the JAVA_HOME property to the directory in which Java SE 8 is installed.
2. Set the TS_HOME property to the directory in which the Jakarta Mail TCK 2.0 software is installed.
3. Set the JARPATH property to the directory in which the Jakarta Mail 2.0 CI has been installed.
Run the JavaTest harness in GUI or command-line mode, as described in Section 4.4, "Using the JavaTest Harness Software."

4.2 Configuring Your Environment to Run the TCK Against the Vendor Implementation

After configuring your environment as described in this section, continue with the instructions in Section 4.4, "Using the JavaTest Harness Software."

Note

On Windows, you must escape any backslashes with an extra backslash in path separators used in any of the following properties, or use forward slashes as a path separator instead.

Set the following environment variables in your shell environment:
1. JAVA_HOME to the directory in which Java SE 8 is installed
2. ANT_HOME to the directory in which Apache Ant 1.10.0+ is installed
3. TS_HOME to the directory in which the Jakarta Mail TCK 2.0 software is installed
4. JARPATH to the directory in which the Jakarta Mail 2.0 Vendor Implementation has been installed
5. PATH to include the following directories: JAVA_HOME/bin and ANT_HOME/bin
Edit your <TS_HOME>/lib/ts.jte file and set the following environment variables:
1. Set the JAVA_HOME property to the directory in which Java SE 8 is installed.
2. Set the TS_HOME property to the directory in which the Jakarta Mail TCK 2.0 software is installed.
3. Set the JARPATH property to the directory in which the Jakarta Mail 2.0 Vendor Implementation has been installed.
Run the JavaTest harness in GUI or command-line mode, as described in Section 4.4, "Using the JavaTest Harness Software."

4.3 Setting Up a Maibox for the TCK to Use

Install IMAP server software on a machine.
Note that the IMAP server must support IMAP4 (RFC 1730) or IMAP4rev1 (RFC 2060).
Create one user account with password on this server.
Note that a password is necessary.
Populate the mailbox for the user you just created:
1. Change to the $TS_HOME/tests/mailboxes directory.
2. Execute the following commands:
  javac fpopulate.java java fpopulate -s test1 -d dest_url
  where dest_url is of the form:
  protocol://username:password@hostname/
Install SMTP software on a machine.
Configure a user account so that the SMTP server can deliver email to that account.
Refer to your SMTP server documentation for instructions.
Edit your <TS_HOME>/lib/ts.jte file and set the following variables:
1. JAVAMAIL_SERVER to the server on which the mail server is installed
2. JAVAMAIL_USERNAME to the user name for the user account you created in step 2
3. JAVAMAIL_PASSWORD to the password for the user account you created in step 2
4. JAVAMAIL_ROOT_PATH to the folder under which your test mailboxes are defined
  This variable must be set to "" or "/" if your mailboxes are directly under the root.
5. SMTP_USERNAME to the SMTP user name
  This is usually the same as the IMAP user name if you are using a mail server.
6. SMTP_DOMAIN to the domain name of the server; for example, sun.com, aol.com

4.4 Using the JavaTest Harness Software

There are two general ways to run the Jakarta Mail TCK test suite using the JavaTest harness software:

Through the JavaTest GUI; if using this method, please continue on to Section 4.5, "Using the JavaTest Harness Configuration GUI."
In JavaTest batch mode, from the command line in your shell environment; if using this method, please proceed directly to Chapter 5, "Executing Tests."

4.5 Using the JavaTest Harness Configuration GUI

You can use the JavaTest harness GUI to modify general test settings and to quickly get started with the default Jakarta Mail TCK test environment. This section covers the following topics:

Configuration GUI Overview
Starting the Configuration GUI
To Configure the JavaTest Harness to Run the Jakarta Mail TCK Tests
Modifying the Default Test Configuration

Note	It is only necessary to proceed with this section if you want to run the JavaTest harness in GUI mode. If you plan to run the JavaTest harness in command-line mode, skip the remainder of this chapter, and continue with Chapter 5, "Executing Tests."

4.5.1 Configuration GUI Overview

In order for the JavaTest harness to execute the test suite, it requires information about how your computing environment is configured. The JavaTest harness requires two types of configuration information:

Test environment: This is data used by the tests. For example, the path to the Java runtime, how to start the product being tested, network resources, and other information required by the tests in order to run. This information does not change frequently and usually stays constant from test run to test run.
Test parameters: This is information used by the JavaTest harness to run the tests. Test parameters are values used by the JavaTest harness that determine which tests in the test suite are run, how the tests should be run, and where the test reports are stored. This information often changes from test run to test run.

The first time you run the JavaTest harness software, you are asked to specify the test suite and work directory that you want to use. (These parameters can be changed later from within the JavaTest harness GUI.)

Once the JavaTest harness GUI is displayed, whenever you choose Start, then Run Tests to begin a test run, the JavaTest harness determines whether all of the required configuration information has been supplied:

If the test environment and parameters have been completely configured, the test run starts immediately.
If any required configuration information is missing, the configuration editor displays a series of questions asking you the necessary information. This is called the configuration interview. When you have entered the configuration data, you are asked if you wish to proceed with running the test.

4.5.2 Starting the Configuration GUI

Before you start the JavaTest harness software, you must have a valid test suite and Java SE 8 installed on your system.

The Jakarta Mail TCK includes an Ant script that is used to execute the JavaTest harness from the <TS_HOME> directory. Using this Ant script to start the JavaTest harness is part of the procedure described in Section 4.5.3, "To Configure the JavaTest Harness to Run the TCK Tests."

When you execute the JavaTest harness software for the first time, the JavaTest harness displays a Welcome dialog box that guides you through the initial startup configuration.

If it is able to open a test suite, the JavaTest harness displays a Welcome to JavaTest dialog box that guides you through the process of either opening an existing work directory or creating a new work directory as described in the JavaTest online help.
If the JavaTest harness is unable to open a test suite, it displays a Welcome to JavaTest dialog box that guides you through the process of opening both a test suite and a work directory as described in the JavaTest documentation.

After you specify a work directory, you can use the Test Manager to configure and run tests as described in Section 4.5.3, "To Configure the JavaTest Harness to Run the TCK Tests."

4.5.3 To Configure the JavaTest Harness to Run the TCK Tests

The answers you give to some of the configuration interview questions are specific to your site. For example, the name of the host on which the JavaTest harness is running. Other configuration parameters can be set however you wish. For example, where you want test report files to be stored.

Note that you only need to complete all these steps the first time you start the JavaTest test harness. After you complete these steps, you can either run all of the tests by completing the steps in Section 5.1, "Starting JavaTest," or run a subset of the tests by completing the steps in Section 5.2, "Running a Subset of the Tests."

Change to the <TS_HOME> directory and start the JavaTest test harness:
cd <TS_HOME>
ant gui
From the File menu, click Open Quick Start Wizard.
The Welcome screen displays.
Select Start a new test run, and then click Next.
You are prompted to create a new configuration or use a configuration template.
Select Create a new configuration, and then click Next.
You are prompted to select a test suite.
Accept the default suite (<TS_HOME>), and then click Next.
You are prompted to specify a work directory to use to store your test results.
Type a work directory name or use the Browse button to select a work directory, and then click Next.
You are prompted to start the configuration editor or start a test run. At this point, the Jakarta Mail TCK is configured to run the default test suite.
Deselect the Start the configuration editor option, and then click Finish.
Click Run Tests, then click Start.
The JavaTest harness starts running the tests.
To reconfigure the JavaTest test harness, do one of the following:
- Click Configuration, then click New Configuration.
- Click Configuration, then click Change Configuration.
Click Report, and then click Create Report.
Specify the directory in which the JavaTest test harness will write the report, and then click OK.
A report is created, and you are asked whether you want to view it.
Click Yes to view the report.

4.5.4 Modifying the Default Test Configuration

The JavaTest GUI enables you to configure numerous test options. These options are divided into two general dialog box groups:

Group 1: Available from the JavaTest Configure/Change Configuration submenus, the following options are displayed in a tabbed dialog box:
- Tests to Run
- Exclude List
- Keywords
- Prior Status
- Test Environment
- Concurrency
- Timeout Factor
Group 2: Available from the JavaTest Configure/Change Configuration/Other Values submenu, or by pressing Ctrl+E, the following options are displayed in a paged dialog box:
- Environment Files
- Test Environment
- Specify Tests to Run
- Specify an Exclude List

Note that there is some overlap between the functions in these two dialog boxes; for those functions use the dialog box that is most convenient for you. Please refer to the JavaTest Harness documentation or the online help for complete information about these various options.