Test Result

276 failures (+30) , 3,188 skipped (+299)
8,928 tests (+412)
Took 2 hr 22 min.

All Failed Tests

Test NameDurationAge
 Scenario: Restarting job with Command Execution step.Scenario: Restarting job with Command Execution step2 ms1
 Scenario: Restarting job with Asset Write step.Scenario: Restarting job with Asset Write step2 ms1
 Scenario: Restarting job with Configuration Put step.Scenario: Restarting job with Configuration Put step2 ms1
 Scenario: Restarting job with Bundle Start step.Scenario: Restarting job with Bundle Start step4 ms1
 Scenario: Restarting job with Bundle Stop step.Scenario: Restarting job with Bundle Stop step4 ms1
 Scenario: Restarting job with Package Install step.Scenario: Restarting job with Package Install step5 ms1
 Scenario: Restarting job with Package Uninstall step.Scenario: Restarting job with Package Uninstall step3 ms1
 Scenario: Restarting job with two Bundle Start steps.Scenario: Restarting job with two Bundle Start steps3 ms1
 Scenario: Restarting job with Bundle Stop and Bundle Start steps.Scenario: Restarting job with Bundle Stop and Bundle Start steps4 ms1
 Scenario: Restarting job with Package Download/Install and Bundle Start steps and multiple devices.Scenario: Restarting job with Package Download/Install and Bundle Start steps and multiple devices4 ms1
 Scenario: Restarting a job with Package Uninstall and Bundle Start steps.Scenario: Restarting a job with Package Uninstall and Bundle Start steps3 ms1
 Scenario: Restarting a job with Command Execution and Bundle Start steps.Scenario: Restarting a job with Command Execution and Bundle Start steps4 ms1
 Scenario: Restarting a job with Asset Write and Bundle Start steps.Scenario: Restarting a job with Asset Write and Bundle Start steps3 ms1
 Scenario: Restarting a job with Configuration Put and Bundle Start steps.Scenario: Restarting a job with Configuration Put and Bundle Start steps5 ms1
 Scenario: Starting job with Bundle Start step and multiple devices.Scenario: Starting job with Bundle Start step and multiple devices2 ms5
 Scenario: Starting job with Bundle Stop step and multiple devices.Scenario: Starting job with Bundle Stop step and multiple devices2 ms5
 Scenario: Starting job with Package Download/Install step and multiple devices.Scenario: Starting job with Package Download/Install step and multiple devices1 ms5
 Scenario: Starting job with Package Uninstall step and multiple device.Scenario: Starting job with Package Uninstall step and multiple device2 ms5
 Scenario: Starting job with Asset Write step and multiple devices.Scenario: Starting job with Asset Write step and multiple devices3 ms5
 Scenario: Starting job with Configuration Put step and multiple devices.Scenario: Starting job with Configuration Put step and multiple devices2 ms5
 Scenario: Starting job with Command Execution step and multiple devices.Scenario: Starting job with Command Execution step and multiple devices2 ms5
 Scenario: Starting job with two Bundle Start steps and multiple devices.Scenario: Starting job with two Bundle Start steps and multiple devices2 ms5
 Scenario: Starting job with Bundle Stop and Bundle Start step and multiple devices.Scenario: Starting job with Bundle Stop and Bundle Start step and multiple devices2 ms5
 Scenario: Starting job with Package Download/Install and Bundle Start steps and multiple devices.Scenario: Starting job with Package Download/Install and Bundle Start steps and multiple devices4 ms5
 Scenario: Starting job with Package Uninstall and Bundle start steps and multiple device.Scenario: Starting job with Package Uninstall and Bundle start steps and multiple device1 ms5
 Scenario: Starting job with Asset Write and Bundle Start steps and multiple devices.Scenario: Starting job with Asset Write and Bundle Start steps and multiple devices2 ms5
 Scenario: Starting job with Configuration Put and Bundle Start steps and multiple devices.Scenario: Starting job with Configuration Put and Bundle Start steps and multiple devices2 ms5
 Scenario: Starting job with Command Execution and Bundle Start steps and multiple devices.Scenario: Starting job with Command Execution and Bundle Start steps and multiple devices2 ms5
 Scenario: Find correct number of messages by corresponding metric.Then I prepare a number of messages with the following details and remember the list as "TestMessages"2 ms6
 Scenario: Find correct number of messages by corresponding metric.Scenario: Find correct number of messages by corresponding metric2 ms6
 Scenario: Finding correct number of messages by corresponding two metrics.Then I prepare a number of messages with the following details and remember the list as "TestMessages"1 ms6
 Scenario: Finding correct number of messages by corresponding two metrics.Scenario: Finding correct number of messages by corresponding two metrics2 ms6
 Scenario: Finding all messages by selecting all metrics.Then I prepare a number of messages with the following details and remember the list as "TestMessages"1 ms6
 Scenario: Finding all messages by selecting all metrics.Scenario: Finding all messages by selecting all metrics1 ms6
 Scenario: Finding messages with incorrect metric parameters.Then I prepare a number of messages with the following details and remember the list as "TestMessages"2 ms6
 Scenario: Finding messages with incorrect metric parameters.Scenario: Finding messages with incorrect metric parameters2 ms6
 Scenario: Find correct number of messages by corresponding metric.Then I prepare a number of messages with the following details and remember the list as "TestMessages"2 ms6
 Scenario: Find correct number of messages by corresponding metric.Scenario: Find correct number of messages by corresponding metric2 ms6
 Scenario: Finding correct number of messages by corresponding two metrics.Then I prepare a number of messages with the following details and remember the list as "TestMessages"1 ms6
 Scenario: Finding correct number of messages by corresponding two metrics.Scenario: Finding correct number of messages by corresponding two metrics2 ms6
 Scenario: Finding all messages by selecting all metrics.Then I prepare a number of messages with the following details and remember the list as "TestMessages"1 ms6
 Scenario: Finding all messages by selecting all metrics.Scenario: Finding all messages by selecting all metrics2 ms6
 Scenario: Finding messages with incorrect metric parameters.Then I prepare a number of messages with the following details and remember the list as "TestMessages"1 ms6
 Scenario: Finding messages with incorrect metric parameters.Scenario: Finding messages with incorrect metric parameters2 ms6
 Scenario: Restarting Job With Valid "Command Execution" And Step Index=0 For The First Time.Scenario: Restarting Job With Valid "Command Execution" And Step Index=0 For The First Time2 ms6
 Scenario: Restarting Job With Invalid "Command Execution" And Step Index=0 For The First Time.Scenario: Restarting Job With Invalid "Command Execution" And Step Index=0 For The First Time2 ms6
 Scenario: Restarting Job With Valid "Command Execution" And Step Index=0 For The Second Time.Scenario: Restarting Job With Valid "Command Execution" And Step Index=0 For The Second Time2 ms6
 Scenario: Restarting Job With Invalid "Command Execution" And Step Index=0 For The Second Time.Scenario: Restarting Job With Invalid "Command Execution" And Step Index=0 For The Second Time2 ms6
 Scenario: Restarting Job With Valid "Bundle Start" And Step Index=0 For The First Time.Scenario: Restarting Job With Valid "Bundle Start" And Step Index=0 For The First Time5 ms6
 Scenario: Restarting Job With Invalid "Bundle Start" And Step Index=0 For The First Time.Scenario: Restarting Job With Invalid "Bundle Start" And Step Index=0 For The First Time5 ms6
 Scenario: Restarting Job With Valid "Bundle Start" And Step Index=0 For The Second Time.Scenario: Restarting Job With Valid "Bundle Start" And Step Index=0 For The Second Time4 ms6
 Scenario: Restarting Job With Invalid "Bundle Start" And Step Index=0 For The Second Time.Scenario: Restarting Job With Invalid "Bundle Start" And Step Index=0 For The Second Time4 ms6
 Scenario: Restarting Job With Valid "Bundle Stop" And Step Index=0 For The First Time.Scenario: Restarting Job With Valid "Bundle Stop" And Step Index=0 For The First Time4 ms6
 Scenario: Restarting Job With Invalid "Bundle Stop" And Step Index=0 For The First Time.Scenario: Restarting Job With Invalid "Bundle Stop" And Step Index=0 For The First Time4 ms6
 Scenario: Restarting Job With Valid "Bundle Stop" And Step Index=0 For The Second Time.Scenario: Restarting Job With Valid "Bundle Stop" And Step Index=0 For The Second Time5 ms6
 Scenario: Restarting Job With Invalid "Bundle Stop" And Step Index=0 For The Second Time.Scenario: Restarting Job With Invalid "Bundle Stop" And Step Index=0 For The Second Time5 ms6
 Scenario: Starting job with Bundle Start step and multiple devices.Then I count 21 ms6
 Scenario: Starting job with Bundle Stop step and multiple devices.Then I count 21 ms6
 Scenario: Starting job with Package Uninstall step and multiple device.Then I count 21 ms6
 Scenario: Starting job with Asset Write step and multiple devices.Then I count 22 ms6
 Scenario: Starting job with Configuration Put step and multiple devices.Then I count 21 ms6
 Scenario: Starting job with Command Execution step and multiple devices.Then I count 21 ms6
 Scenario: Starting job with two Bundle Start steps and multiple devices.Then I count 21 ms6
 Scenario: Starting job with Bundle Stop and Bundle Start step and multiple devices.Then I count 21 ms6
 Scenario: Starting job with Package Uninstall and Bundle start steps and multiple device.Then I count 21 ms6
 Scenario: Starting job with Asset Write and Bundle Start steps and multiple devices.Then I count 21 ms6
 Scenario: Starting job with Configuration Put and Bundle Start steps and multiple devices.Then I count 21 ms6
 Scenario: Starting job with Command Execution and Bundle Start steps and multiple devices.Then I count 21 ms6
 Scenario: Restarting Job With Valid "Command Execution" And Step Index=0 For The First Time.When I search for events from device "rpione3" in account "kapua-sys"2 ms7
 Scenario: Restarting Job With Invalid "Command Execution" And Step Index=0 For The First Time.When I search for events from device "rpione3" in account "kapua-sys"1 ms7
 Scenario: Restarting Job With Valid "Command Execution" And Step Index=0 For The Second Time.When I search for events from device "rpione3" in account "kapua-sys"1 ms7
 Scenario: Restarting Job With Invalid "Command Execution" And Step Index=0 For The Second Time.When I search for events from device "rpione3" in account "kapua-sys"2 ms7
 Scenario: Starting a job with valid Command Execution step.When I search for events from device "rpione3" in account "kapua-sys"1 ms7
 Scenario: Starting a job with valid Command Execution step.Scenario: Starting a job with valid Command Execution step2 ms7
 Scenario: Starting a job with invalid Command Execution step.When I search for events from device "rpione3" in account "kapua-sys"1 ms7
 Scenario: Starting a job with invalid Command Execution step.Scenario: Starting a job with invalid Command Execution step2 ms7
 Scenario: Starting a job with valid Bundle Start step.Scenario: Starting a job with valid Bundle Start step4 ms7
 Scenario: Starting a job with invalid Bundle Start step.Scenario: Starting a job with invalid Bundle Start step4 ms7
 Scenario: Starting a job with valid Bundle Stop step.Scenario: Starting a job with valid Bundle Stop step5 ms7
 Scenario: Starting a job with invalid Bundle Stop step.Scenario: Starting a job with invalid Bundle Stop step9 ms7
 Scenario: Starting a job with two valid Bundle Start steps.Scenario: Starting a job with two valid Bundle Start steps5 ms7
 Scenario: Starting a job with two invalid Bundle Start steps.Scenario: Starting a job with two invalid Bundle Start steps6 ms7
 Scenario: Starting a job with valid Bundle Stop and Bundle Start steps.Scenario: Starting a job with valid Bundle Stop and Bundle Start steps3 ms7
 Scenario: Starting a job with invalid Bundle Stop and Bundle Start steps.Scenario: Starting a job with invalid Bundle Stop and Bundle Start steps5 ms7
 Scenario: Start broker for all scenarios.Given Start Broker1 ms8
 Scenario: Start broker for all scenarios.Given Start Broker2 ms8
 Scenario: Start broker for all scenarios.Given Start Broker1 ms8
 Scenario: Start broker for all scenarios.Given Start Broker1 ms8
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios2 ms8
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios2 ms8
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios2 ms8
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios2 ms8
 Scenario: Restarting job with Command Execution step.And A new job target item1 ms8
 Scenario: Restarting job with Asset Write step.And A new job target item1 ms8
 Scenario: Restarting job with Configuration Put step.And A new job target item1 ms8
 Scenario: Restarting job with Bundle Start step.Then Device status is "CONNECTED"4 ms8
 Scenario: Restarting job with Bundle Stop step.Then Device status is "CONNECTED"2 ms8
 Scenario: Restarting job with Package Install step.Then Device status is "CONNECTED"4 ms8
 Scenario: Restarting job with Package Uninstall step.Then Device status is "CONNECTED"2 ms8
 Scenario: Restarting job with two Bundle Start steps.Then Device status is "CONNECTED"2 ms8
 Scenario: Restarting job with Bundle Stop and Bundle Start steps.Then Device status is "CONNECTED"3 ms8
 Scenario: Restarting job with Package Download/Install and Bundle Start steps and multiple devices.Then Device status is "CONNECTED"3 ms8
 Scenario: Restarting a job with Package Uninstall and Bundle Start steps.Then Device status is "CONNECTED"2 ms8
 Scenario: Restarting a job with Command Execution and Bundle Start steps.Then Device status is "CONNECTED"2 ms8
 Scenario: Restarting a job with Asset Write and Bundle Start steps.Then Device status is "CONNECTED"2 ms8
 Scenario: Restarting a job with Configuration Put and Bundle Start steps.Then Device status is "CONNECTED"3 ms8
 Scenario: Restarting Job With Valid "Bundle Start" And Step Index=0 For The First Time.Then Device status is "CONNECTED"3 ms8
 Scenario: Restarting Job With Invalid "Bundle Start" And Step Index=0 For The First Time.Then Device status is "CONNECTED"4 ms8
 Scenario: Restarting Job With Valid "Bundle Start" And Step Index=0 For The Second Time.And Bundles are requested2 ms8
 Scenario: Restarting Job With Invalid "Bundle Start" And Step Index=0 For The Second Time.And Bundles are requested3 ms8
 Scenario: Restarting Job With Valid "Bundle Stop" And Step Index=0 For The First Time.And Bundles are requested2 ms8
 Scenario: Restarting Job With Invalid "Bundle Stop" And Step Index=0 For The First Time.And Bundles are requested2 ms8
 Scenario: Restarting Job With Valid "Bundle Stop" And Step Index=0 For The Second Time.And Bundles are requested3 ms8
 Scenario: Restarting Job With Invalid "Bundle Stop" And Step Index=0 For The Second Time.And Bundles are requested3 ms8
 Scenario: Starting a job with Command Execution step.And A new job target item4 ms8
 Scenario: Starting a job with Command Execution step.Scenario: Starting a job with Command Execution step4 ms8
 Scenario: Starting a job with Asset Write step.And A new job target item1 ms8
 Scenario: Starting a job with Asset Write step.Scenario: Starting a job with Asset Write step2 ms8
 Scenario: Starting a job with Bundle Start step.Then Device status is "CONNECTED"2 ms8
 Scenario: Starting a job with Bundle Start step.Scenario: Starting a job with Bundle Start step4 ms8
 Scenario: Starting a job with Bundle Stop step.And Bundles are requested2 ms8
 Scenario: Starting a job with Bundle Stop step.Scenario: Starting a job with Bundle Stop step4 ms8
 Scenario: Starting a job with Configuration Put step.And A new job target item1 ms8
 Scenario: Starting a job with Configuration Put step.Scenario: Starting a job with Configuration Put step2 ms8
 Scenario: Starting a job with Package Install Command step.Then Device status is "CONNECTED"2 ms8
 Scenario: Starting a job with Package Install Command step.Scenario: Starting a job with Package Install Command step3 ms8
 Scenario: Starting a job with Package Uninstall Command step.Then Device status is "CONNECTED"2 ms8
 Scenario: Starting a job with Package Uninstall Command step.Scenario: Starting a job with Package Uninstall Command step4 ms8
 Scenario: Starting a job with Command Execution and Bundle Start steps.Then Device status is "CONNECTED"4 ms8
 Scenario: Starting a job with Command Execution and Bundle Start steps.Scenario: Starting a job with Command Execution and Bundle Start steps6 ms8
 Scenario: Starting a job with Asset Write and Bundle Start steps.Then Device status is "CONNECTED"3 ms8
 Scenario: Starting a job with Asset Write and Bundle Start steps.Scenario: Starting a job with Asset Write and Bundle Start steps4 ms8
 Scenario: Starting a job with two Bundle Start steps.Then Device status is "CONNECTED"4 ms8
 Scenario: Starting a job with two Bundle Start steps.Scenario: Starting a job with two Bundle Start steps5 ms8
 Scenario: Starting a job with Bundle Stop and Bundle Start steps.And Bundles are requested2 ms8
 Scenario: Starting a job with Bundle Stop and Bundle Start steps.Scenario: Starting a job with Bundle Stop and Bundle Start steps4 ms8
 Scenario: Starting a job with Configuration Put and Bundle Start steps.And Bundles are requested2 ms8
 Scenario: Starting a job with Configuration Put and Bundle Start steps.Scenario: Starting a job with Configuration Put and Bundle Start steps3 ms8
 Scenario: Starting a job with Package Install and Bundle Start steps.Then Device status is "CONNECTED"3 ms8
 Scenario: Starting a job with Package Install and Bundle Start steps.Scenario: Starting a job with Package Install and Bundle Start steps5 ms8
 Scenario: Starting a job with Package Uninstall and Bundle Start steps.Then Device status is "CONNECTED"2 ms8
 Scenario: Starting a job with Package Uninstall and Bundle Start steps.Scenario: Starting a job with Package Uninstall and Bundle Start steps4 ms8
 Scenario: Starting job with Package Download/Install step and multiple devices.Then Device status is "CONNECTED"0 ms8
 Scenario: Starting job with Package Download/Install and Bundle Start steps and multiple devices.Then Device status is "CONNECTED"3 ms8
 Scenario: Starting a job with valid Bundle Start step.Then Device status is "CONNECTED"3 ms8
 Scenario: Starting a job with invalid Bundle Start step.Then Device status is "CONNECTED"3 ms8
 Scenario: Starting a job with valid Bundle Stop step.And Bundles are requested4 ms8
 Scenario: Starting a job with invalid Bundle Stop step.And Bundles are requested9 ms8
 Scenario: Starting a job with two valid Bundle Start steps.Then Device status is "CONNECTED"4 ms8
 Scenario: Starting a job with two invalid Bundle Start steps.Then Device status is "CONNECTED"4 ms8
 Scenario: Starting a job with valid Bundle Stop and Bundle Start steps.And Bundles are requested2 ms8
 Scenario: Starting a job with invalid Bundle Stop and Bundle Start steps.And Bundles are requested2 ms8
 Scenario: Start broker for all scenarios.Given Start Broker2 ms8
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios2 ms8
 Scenario: Start broker for all scenarios.Given Start Broker2 ms13
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios3 ms13
 Scenario: Test LOOSE user coupling on single connection.And The connection status is "CONNECTED"2 ms13
 Scenario: Test LOOSE user coupling on single connection.Scenario: Test LOOSE user coupling on single connection4 ms13
 Scenario: New connection with reserved ID.And The connection status is "CONNECTED"2 ms13
 Scenario: New connection with reserved ID.Scenario: New connection with reserved ID3 ms13
 Scenario: Test STRICT user coupling on single connection.And The connection status is "CONNECTED"2 ms13
 Scenario: Test STRICT user coupling on single connection.Scenario: Test STRICT user coupling on single connection4 ms13
 Scenario: Test STRICT user coupling with user change allowed on single connection.And The connection status is "CONNECTED"1 ms13
 Scenario: Test STRICT user coupling with user change allowed on single connection.Scenario: Test STRICT user coupling with user change allowed on single connection3 ms13
 Scenario: Test LOOSE user coupling with 3 connections.And The connection status is "CONNECTED"2 ms13
 Scenario: Test LOOSE user coupling with 3 connections.Scenario: Test LOOSE user coupling with 3 connections3 ms13
 Scenario: Test STRICT user coupling with 3 connections and a reserved user.And The connection status is "CONNECTED"2 ms13
 Scenario: Test STRICT user coupling with 3 connections and a reserved user.Scenario: Test STRICT user coupling with 3 connections and a reserved user4 ms13
 Scenario: Extra long continuous test with multiple subscenarios with LOOSE default connection mode.And The connection status is "CONNECTED"2 ms13
 Scenario: Extra long continuous test with multiple subscenarios with LOOSE default connection mode.Scenario: Extra long continuous test with multiple subscenarios with LOOSE default connection mode4 ms13
 Scenario: Extra long continuous test with multiple subscenarios with STRICT default connection mode.And The connection status is "CONNECTED"2 ms13
 Scenario: Extra long continuous test with multiple subscenarios with STRICT default connection mode.Scenario: Extra long continuous test with multiple subscenarios with STRICT default connection mode3 ms13
 Scenario: Extra long continuous test with multiple subscenarios with STRICT default connection mode and no previously defined devices.Then I find 1 connection2 ms13
 Scenario: Extra long continuous test with multiple subscenarios with STRICT default connection mode and no previously defined devices.Scenario: Extra long continuous test with multiple subscenarios with STRICT default connection mode and no previously defined devices4 ms13
 Scenario: Start broker for all scenarios.Given Start Broker2 ms13
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios2 ms13
 Scenario: Start broker for all scenarios.Given Start Broker1 ms13
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios2 ms13
 Scenario: Start broker for all scenarios.Given Start Broker2 ms13
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios2 ms13
 Scenario: Start broker for all scenarios.Given Start Broker2 ms15
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios2 ms15
 Scenario: Start broker for all scenarios.Given Start Broker1 ms15
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios2 ms15
 Scenario: DM1 Data manage publish to CTRL_ACC_REPLY is allowed.Then Broker receives string "Hello broker" on topic "$EDC/acme/client-1/CONF-V1/REPLY"5 ms15
 Scenario: DM1 Data manage publish to CTRL_ACC_REPLY is allowed.Scenario: DM1 Data manage publish to CTRL_ACC_REPLY is allowed7 ms15
 Scenario: DM2 Data manage create sub-topic on CTRL_ACC_REPLY.Then Broker receives string "Hello broker" on topic "$EDC/acme/client-1/CONF-V1/REPLY/foo"3 ms15
 Scenario: DM2 Data manage create sub-topic on CTRL_ACC_REPLY.Scenario: DM2 Data manage create sub-topic on CTRL_ACC_REPLY4 ms15
 Scenario: DM4 Data manage subscribe on CTRL_ACC_REPLY of another account.Then An exception was thrown3 ms15
 Scenario: DM4 Data manage subscribe on CTRL_ACC_REPLY of another account.Scenario: DM4 Data manage subscribe on CTRL_ACC_REPLY of another account5 ms15
 Scenario: DM7 Data manage subscribe on CTRL_ACC is not allowed.Then An exception was thrown2 ms15
 Scenario: DM7 Data manage subscribe on CTRL_ACC is not allowed.Scenario: DM7 Data manage subscribe on CTRL_ACC is not allowed4 ms15
 Scenario: DM11 Data manage publish to ACL_CTRL_ACC_NOTIFY is allowed.Then Broker receives string "Hello broker" on topic "$EDC/acme/foo/bar/NOTIFY/client-1"4 ms15
 Scenario: DM11 Data manage publish to ACL_CTRL_ACC_NOTIFY is allowed.Scenario: DM11 Data manage publish to ACL_CTRL_ACC_NOTIFY is allowed5 ms15
 Scenario: DM13 Data manage subscribe on ACL_CTRL_ACC_NOTIFY is not allowed.Then An exception was thrown2 ms15
 Scenario: DM13 Data manage subscribe on ACL_CTRL_ACC_NOTIFY is not allowed.Scenario: DM13 Data manage subscribe on ACL_CTRL_ACC_NOTIFY is not allowed4 ms15
 Scenario: Start broker for all scenarios.Given Start Broker29 ms15
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios29 ms15
 Scenario: B1 Broker publish to CTRL_ACC_REPLY.Then Broker receives string "Hello broker" on topic "$EDC/acme/client-1/CONF-V1/REPLY"2 ms15
 Scenario: B1 Broker publish to CTRL_ACC_REPLY.Scenario: B1 Broker publish to CTRL_ACC_REPLY4 ms15
 Scenario: B2 Broker create sub-topic on CTRL_ACC_REPLY.Then Broker receives string "Hello broker" on topic "$EDC/acme/client-1/CONF-V1/REPLY/foo"2 ms15
 Scenario: B2 Broker create sub-topic on CTRL_ACC_REPLY.Scenario: B2 Broker create sub-topic on CTRL_ACC_REPLY4 ms15
 Scenario: B4 Broker subscribe on CTRL_ACC_REPLY of another account.Then An exception was thrown3 ms15
 Scenario: B4 Broker subscribe on CTRL_ACC_REPLY of another account.Scenario: B4 Broker subscribe on CTRL_ACC_REPLY of another account5 ms15
 Scenario: B7 Broker subscribe on CTRL_ACC is not allowed.Then An exception was thrown6 ms15
 Scenario: B7 Broker subscribe on CTRL_ACC is not allowed.Scenario: B7 Broker subscribe on CTRL_ACC is not allowed7 ms15
 Scenario: B9 Broker publish to ACL_DATA_ACC is not allowed.Then Broker doesn't receive string "Hello broker" on topic "acme"4 ms15
 Scenario: B9 Broker publish to ACL_DATA_ACC is not allowed.Scenario: B9 Broker publish to ACL_DATA_ACC is not allowed5 ms15
 Scenario: B10 Broker create sub-topic on ACL_DATA_ACC is not allowed.Then Broker doesn't receive string "Hello broker" on topic "acme/foo"4 ms15
 Scenario: B10 Broker create sub-topic on ACL_DATA_ACC is not allowed.Scenario: B10 Broker create sub-topic on ACL_DATA_ACC is not allowed6 ms15
 Scenario: B11 Broker subscribe on ACL_DATA_ACC is not allowed.Then An exception was thrown2 ms15
 Scenario: B11 Broker subscribe on ACL_DATA_ACC is not allowed.Scenario: B11 Broker subscribe on ACL_DATA_ACC is not allowed3 ms15
 Scenario: B13 Broker publish to ACL_CTRL_ACC_NOTIFY is allowed.Then Broker receives string "Hello broker" on topic "$EDC/acme/foo/bar/NOTIFY/client-1"3 ms15
 Scenario: B13 Broker publish to ACL_CTRL_ACC_NOTIFY is allowed.Scenario: B13 Broker publish to ACL_CTRL_ACC_NOTIFY is allowed5 ms15
 Scenario: B15 Broker subscribe on ACL_CTRL_ACC_NOTIFY is not allowed.Then An exception was thrown2 ms15
 Scenario: B15 Broker subscribe on ACL_CTRL_ACC_NOTIFY is not allowed.Scenario: B15 Broker subscribe on ACL_CTRL_ACC_NOTIFY is not allowed3 ms15
 Scenario: D1 Device publish to CTRL_ACC_REPLY.Then Broker receives string "Hello broker" on topic "$EDC/acme/client-1/CONF-V1/REPLY"5 ms15
 Scenario: D1 Device publish to CTRL_ACC_REPLY.Scenario: D1 Device publish to CTRL_ACC_REPLY7 ms15
 Scenario: D2 Device create sub-topic on CTRL_ACC_REPLY.Then Broker receives string "Hello broker" on topic "$EDC/acme/client-1/CONF-V1/REPLY/foo"5 ms15
 Scenario: D2 Device create sub-topic on CTRL_ACC_REPLY.Scenario: D2 Device create sub-topic on CTRL_ACC_REPLY6 ms15
 Scenario: D4 Device subscribe on CTRL_ACC_REPLY of another account.Then An exception was thrown2 ms15
 Scenario: D4 Device subscribe on CTRL_ACC_REPLY of another account.Scenario: D4 Device subscribe on CTRL_ACC_REPLY of another account3 ms15
 Scenario: D7 Device publish to ACL_DATA_ACC is not allowed.Then Broker doesn't receive string "Hello broker" on topic "acme"6 ms15
 Scenario: D7 Device publish to ACL_DATA_ACC is not allowed.Scenario: D7 Device publish to ACL_DATA_ACC is not allowed8 ms15
 Scenario: D8 Device create sub-topic on ACL_DATA_ACC is not allowed.Then Broker doesn't receive string "Hello broker" on topic "acme/foo"3 ms15
 Scenario: D8 Device create sub-topic on ACL_DATA_ACC is not allowed.Scenario: D8 Device create sub-topic on ACL_DATA_ACC is not allowed4 ms15
 Scenario: D9 Device subscribe on ACL_DATA_ACC is not allowed.Then An exception was thrown3 ms15
 Scenario: D9 Device subscribe on ACL_DATA_ACC is not allowed.Scenario: D9 Device subscribe on ACL_DATA_ACC is not allowed4 ms15
 Scenario: D11 Device publish to ACL_CTRL_ACC_NOTIFY is allowed.Then Broker receives string "Hello broker" on topic "$EDC/acme/foo/bar/NOTIFY/client-1"3 ms15
 Scenario: D11 Device publish to ACL_CTRL_ACC_NOTIFY is allowed.Scenario: D11 Device publish to ACL_CTRL_ACC_NOTIFY is allowed4 ms15
 Scenario: DV1 Data view publish to CTRL_ACC_REPLY.Then Broker receives string "Hello broker" on topic "$EDC/acme/client-1/CONF-V1/REPLY"4 ms15
 Scenario: DV1 Data view publish to CTRL_ACC_REPLY.Scenario: DV1 Data view publish to CTRL_ACC_REPLY6 ms15
 Scenario: DV2 Data view create sub-topic on CTRL_ACC_REPLY.Then Broker receives string "Hello broker" on topic "$EDC/acme/client-1/CONF-V1/REPLY/foo"2 ms15
 Scenario: DV2 Data view create sub-topic on CTRL_ACC_REPLY.Scenario: DV2 Data view create sub-topic on CTRL_ACC_REPLY3 ms15
 Scenario: DV4 Data view subscribe on CTRL_ACC_REPLY of another account.Then An exception was thrown2 ms15
 Scenario: DV4 Data view subscribe on CTRL_ACC_REPLY of another account.Scenario: DV4 Data view subscribe on CTRL_ACC_REPLY of another account2 ms15
 Scenario: DV7 Data view subscribe on CTRL_ACC is not allowed.Then An exception was thrown3 ms15
 Scenario: DV7 Data view subscribe on CTRL_ACC is not allowed.Scenario: DV7 Data view subscribe on CTRL_ACC is not allowed5 ms15
 Scenario: DV9 Data view publish to ACL_DATA_ACC is not allowed.Then Broker doesn't receive string "Hello broker" on topic "acme"6 ms15
 Scenario: DV9 Data view publish to ACL_DATA_ACC is not allowed.Scenario: DV9 Data view publish to ACL_DATA_ACC is not allowed8 ms15
 Scenario: DV10 Data view create sub-topic on ACL_DATA_ACC is allowed.Then Broker doesn't receive string "Hello broker" on topic "acme/foo"2 ms15
 Scenario: DV10 Data view create sub-topic on ACL_DATA_ACC is allowed.Scenario: DV10 Data view create sub-topic on ACL_DATA_ACC is allowed4 ms15
 Scenario: DV15 Data view publish to ACL_CTRL_ACC_NOTIFY is allowed.Then Broker receives string "Hello broker" on topic "$EDC/acme/foo/bar/NOTIFY/client-1"4 ms15
 Scenario: DV15 Data view publish to ACL_CTRL_ACC_NOTIFY is allowed.Scenario: DV15 Data view publish to ACL_CTRL_ACC_NOTIFY is allowed6 ms15
 Scenario: DV17 Data view subscribe on ACL_CTRL_ACC_NOTIFY is not allowed.Then An exception was thrown3 ms15
 Scenario: DV17 Data view subscribe on ACL_CTRL_ACC_NOTIFY is not allowed.Scenario: DV17 Data view subscribe on ACL_CTRL_ACC_NOTIFY is not allowed4 ms15
 Scenario: Start broker for all scenarios.Given Start Broker1 ms15
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios2 ms15
 Scenario: Send BIRTH message and then DC message.And Bundles are requested0 ms15
 Scenario: Send BIRTH message and then DC message.Scenario: Send BIRTH message and then DC message0 ms15
 Scenario: Start broker for all scenarios.Given Start Broker1 ms15
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios2 ms15
 Scenario: Send BIRTH message and then DC message while broker ip is set by config file.Then Device is connected with "localhost" server ip1 ms15
 Scenario: Send BIRTH message and then DC message while broker ip is set by config file.Scenario: Send BIRTH message and then DC message while broker ip is set by config file2 ms15
 Scenario: Start broker for all scenarios.Given Start Broker2 ms15
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios2 ms15
 Scenario: Send BIRTH message and then DC message while broker ip is set by System.Then Device is connected with "localhost" server ip1 ms15
 Scenario: Send BIRTH message and then DC message while broker ip is set by System.Scenario: Send BIRTH message and then DC message while broker ip is set by System1 ms15
 Scenario: Start broker for all scenarios.Given Start Broker2 ms15
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios2 ms15
 Scenario: Start broker for all scenarios.Given Start Broker2 ms15
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios3 ms15
 Scenario: Stealing link scenario.And Client named "client-2" is not connected4 ms15
 Scenario: Stealing link scenario.Scenario: Stealing link scenario5 ms15
 Scenario: Start broker for all scenarios.Given Start Broker5 ms15
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios5 ms15
 Scenario: Connect to the system and publish some data.Then Device sim-1 for account kapua-sys is registered after 5 seconds4 ms15
 Scenario: Connect to the system and publish some data.Scenario: Connect to the system and publish some data5 ms15
 Scenario: Start broker for all scenarios.Given Start Broker2 ms15
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios3 ms15
 Scenario: Start broker for all scenarios.Given Start Broker1 ms15
 Scenario: Start broker for all scenarios.Scenario: Start broker for all scenarios2 ms15
 Scenario: Starting and stopping the simulator should create a device entry and properly set its status.Then Device sim-1 for account kapua-sys is registered after 5 seconds4 ms15
 Scenario: Starting and stopping the simulator should create a device entry and properly set its status.Scenario: Starting and stopping the simulator should create a device entry and properly set its status6 ms15
 Scenario: Installing a package.Then Device sim-1 for account kapua-sys is registered after 5 seconds3 ms15
 Scenario: Installing a package.Scenario: Installing a package4 ms15

All Tests

PackageDurationFail(diff)Skip(diff)Pass(diff)Total(diff)
(root)7.3 sec276+303175+2995165+838616+412
org.eclipse.kapua80 ms0033
org.eclipse.kapua.broker.core.plugin3.3 sec001515
org.eclipse.kapua.client.gateway72 ms004343
org.eclipse.kapua.client.gateway.kura0.18 sec001414
org.eclipse.kapua.client.gateway.spi.util2.7 sec001515
org.eclipse.kapua.client.gateway.util1 ms0033
org.eclipse.kapua.commons.about0.47 sec0011
org.eclipse.kapua.commons.configuration99 ms0011
org.eclipse.kapua.commons.configuration.metatype11 ms001919
org.eclipse.kapua.commons.liquibase0.55 sec0044
org.eclipse.kapua.commons.metric7 ms0022
org.eclipse.kapua.commons.model0.13 sec0088
org.eclipse.kapua.commons.model.id4 ms0011
org.eclipse.kapua.commons.security2.8 sec0033
org.eclipse.kapua.commons.setting0 ms0044
org.eclipse.kapua.commons.util46 ms003838
org.eclipse.kapua.commons.util.xml0.19 sec0099
org.eclipse.kapua.integration.misc0 ms0101
org.eclipse.kapua.integration.service.datastoreJunit0 ms0505
org.eclipse.kapua.kura.simulator.main.simulation5.3 sec001313
org.eclipse.kapua.locator.internal0.17 sec021012
org.eclipse.kapua.message.internal0.26 sec022628
org.eclipse.kapua.message.internal.device.data1 ms0033
org.eclipse.kapua.message.internal.device.lifecycle46 ms002121
org.eclipse.kapua.message.internal.xml1 sec001111
org.eclipse.kapua.service.datastore.test.junit0.19 sec0044
org.eclipse.kapua.service.datastore.test.junit.client0.37 sec0077
org.eclipse.kapua.service.datastore.test.junit.clientTransport80 ms031922
org.eclipse.kapua.service.device.management.commons.message.notification11 ms0022