Started 26 days ago
Took 2 min 51 sec

Failed Build #28 (Jun 21, 2018 10:33:36 AM)

Changes
  1. Release 0.6 (detail / githubweb)
  2. Bump version to 0.7-M1-SNAPSHOT (detail / githubweb)
  3. Mark standard example receiver as not supporting Command and Control. (detail / githubweb)
  4. Remove blank line. (detail / githubweb)
  5. Check for credit when sending events with sendAndWaitForOutcome. (detail / githubweb)
  6. Check for credit when sending events with sendAndWaitForOutcome. (detail / githubweb)
  7. Fix in reply address for command and control link. (detail / githubweb)
  8. Fix a few IDE warning by wrong use of @SuppressWarnings("unchecked") (detail / githubweb)
  9. Provide command receiver close handler instead of timerId. (detail / githubweb)
  10. Set correct timeout for command client in example application. (detail / githubweb)
  11. Handle reconnections for example consumer. (detail / githubweb)
  12. [#638] Add documentation about the Connection Events message format (detail / githubweb)
  13. Add missing typing to variable declaration. (detail / githubweb)
  14. Keep original copyright header. (detail / githubweb)
  15. Remove obsolete logger. (detail / githubweb)
  16. Fix JavaDoc. (detail / githubweb)
  17. Upgrade to EnMasse 0.20.0 (detail / githubweb)
  18. Fix an issue where 4xx and 5xx codes did not get detected as failure (detail / githubweb)
  19. Move Connection Events documentation to Events API and concept page (detail / githubweb)
  20. Remove empty extra paragraph in index (detail / githubweb)
  21. Minor corrections and typos to connection event description. (detail / githubweb)
  22. Provide meaningful toString() method. (detail / githubweb)
  23. Check for final local variables (detail / githubweb)
  24. Bugfix (wrong exception was thrown) and javadoc improvement. (detail / githubweb)
  25. [#629] Recreate command receiver link if it was closed. (detail / githubweb)
  26. [#629] Provide unit tests for the command receiver link. (detail / githubweb)
  27. Remove obsolete @Component annotation at abstract Metrics class. (detail / githubweb)
  28. [#646] Open downstream links as part of MQTT device authentication. (detail / githubweb)
  29. Suppress warnings regarding raw types. (detail / githubweb)
  30. [#646] Fix MQTT connection establishment. (detail / githubweb)
  31. [#629] Increase timeout for specific http adapter unit tests. (detail / githubweb)
  32. Clean up fixture creation code. (detail / githubweb)
  33. Include legal docs in core and client bundles. (detail / githubweb)
  34. [#630] Handle missing replyId in command messages explictly. (detail / githubweb)
  35. [#630] Add uunit tests for creating the command request id. (detail / githubweb)
  36. Fix links to sourc code archives in legal docs. (detail / githubweb)
  37. [#500] Provide support for HonoClient#disconnect() (detail / githubweb)
  38. Allow failure of MQTT QoS 0 tests on Travis. (detail / githubweb)
  39. Improve command and control example description in the User Guide. (detail / githubweb)
  40. Adapt test timeout dynamically. (detail / githubweb)
  41. Use single Maven run to build and run integration tests as well. (detail / githubweb)
  42. Add missing JavaDoc. (detail / githubweb)
  43. Wait for standard health checks of services in integration test startup. (detail / githubweb)
  44. [#630] Helper method and unit tests for command response handling. (detail / githubweb)
  45. Improvements for command and control concept description. (detail / githubweb)
  46. [#629] Attempt to stabilize nightly build by increasing test timeout. (detail / githubweb)
  47. Do not explicitly set integration tests to run. (detail / githubweb)
  48. [#653] Fix credit handling for commands in HTTP adapter. (detail / githubweb)
  49. [#629] Correct error handling if command consumer cannot be setup. (detail / githubweb)
  50. [#629] Remove obsolete test case. (detail / githubweb)
  51. [#629] Use common fixture. (detail / githubweb)
  52. [#629] Closed command links are only logged and not reopened anymore. (detail / githubweb)
  53. Add tracing profile to MQTT adapter. (detail / githubweb)
  54. Do not copy demo certs to modules that do not need them. (detail / githubweb)
  55. [#629] Use shared HTTP client. (detail / githubweb)
  56. [#629] Enable trace logging for test execution. (detail / githubweb)
  57. [#629] Enable additional trace logging for test execution. (detail / githubweb)
  58. Include stack trace in log message for failed message processing. (detail / githubweb)
  59. Expect 202 status code for tests verifying successful message upload. (detail / githubweb)
  60. Fall back to default metrics if not set explicitly. (detail / githubweb)
  61. [#629] Increase log level for test execution back to INFO. (detail / githubweb)
  62. Add diagram illustrating Hono's purpose to landing page. (detail / githubweb)
  63. Enable Jenkins build status icon in drawer. (detail / githubweb)
  64. [#629] Remove unused constant for obsolete command link reopening. (detail / githubweb)
  65. [#649] Improve connection attempt behavior. (detail / githubweb)
  66. [#649] Adapt example code to make use improved HonoClient behavior. (detail / githubweb)
  67. [#649] Log connection error cause at DEBUG level. (detail / githubweb)
  68. [#643] An implementation of the AMQP adapter that allows unauthenticated (detail / githubweb)
  69. Fix netty version used by vert.x 3.5.1. (detail / githubweb)
  70. [#659] Better command response defaults for flow control. (detail / githubweb)
  71. Update Netty notice & license files to reflect version 4.1.19. (detail / githubweb)
  72. [#658] Upgrade to latest Spring 4.3.18 bugfix release. (detail / githubweb)
  73. [#661] Upgrade to latest Spring Boot bug fix release 1.5.13. (detail / githubweb)
  74. [#643] Add tests for AMQP Adapter implementation (Unauthenticated (detail / githubweb)
  75. [#630] Make command request id suitable for command line clients. (detail / githubweb)
  76. Update to OpenJDK 8u171 (detail / githubweb)
  77. Allow service images to respect container limits. (detail / githubweb)
  78. Add bi-weekly project call (#650) (detail / githubweb)
  79. Drop legacy OpenShift deployment example (detail / githubweb)
  80. Fix handling of failure to acknowledge command. (detail / githubweb)
  81. Tweak OpenShift deployment (detail / githubweb)
  82. [#662] Remove fabric8 plugin from Kura adapter. (detail / githubweb)
  83. [#662] Remove fabric8 plugin from MQTT adapter. (detail / githubweb)
  84. [#662] Remove fabric8 plugin from HTTP adapter. (detail / githubweb)
  85. [#662] Remove fabric8 plugin from Auth service. (detail / githubweb)
  86. [#662] Remove fabric8 plugin from Device Registry. (detail / githubweb)
  87. [#662] Remove fabric8 plugin from Hono Messaging. (detail / githubweb)
  88. [#662] Remove fabric8 Maven plugin. (detail / githubweb)
  89. Add resource limits to Kubernetes resource descriptors. (detail / githubweb)
  90. [#662] Remove fabric8 plugin from AMQP adapter. (detail / githubweb)
  91. [#662] Adapt fabric8.skip.build.pom property name. (detail / githubweb)
  92. [#662] Add Docker maven plugin to package phase of build life cycle. (detail / githubweb)
  93. Limit heap space to a reasonable 70% of total memory. (detail / githubweb)
  94. Update checkstyle to 7.8.2, update checkstyle maven plugin to 3.0.0. (detail / githubweb)
  95. Fix alias of MQTT adapter container. (detail / githubweb)
  96. Describe how resource consumption of containers can be limited. (detail / githubweb)
  97. Fix some typos. (detail / githubweb)
  98. Adopt naming convention. (detail / githubweb)
  99. Increase heap memory limit. (detail / githubweb)
  100. Remove Hono Messaging. (detail / githubweb)
  101. Fix some typos, improve headings. (detail / githubweb)
  102. Small improvements. (detail / githubweb)
  103. Small fix. (detail / githubweb)
  104. Update to 0.7-M1. (detail / githubweb)

Started by user kai.hudalla@bosch-si.com

Revision: 29a36704b7644639790dbc8ea673f87b0ac5d2a8
  • refs/remotes/origin/master