SuccessConsole Output

Started calculate disk usage of build
Finished Calculation of disk usage of build in 0 seconds
Started calculate disk usage of workspace
Finished Calculation of disk usage of workspace in 0 seconds
[INFO] 
[INFO] ------------< org.locationtech.geogig:geogig-cli-geotools >-------------
[INFO] Building GeoGig CLI GeoTools 1.4-SNAPSHOT                        [14/22]
[INFO] --------------------------------[ jar ]---------------------------------
[INFO] 
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ geogig-cli-geotools ---
[INFO] Deleting /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target
[INFO] 
[INFO] --- git-commit-id-plugin:2.2.2:revision (default) @ geogig-cli-geotools ---
[INFO] 
[INFO] --- maven-resources-plugin:3.0.1:resources (default-resources) @ geogig-cli-geotools ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 2 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.7.0:compile (default-compile) @ geogig-cli-geotools ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 30 source files to /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/classes
[INFO] 
[INFO] --- maven-resources-plugin:3.0.1:testResources (default-testResources) @ geogig-cli-geotools ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 14 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.7.0:testCompile (default-testCompile) @ geogig-cli-geotools ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 21 source files to /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/test-classes
[INFO] 
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ geogig-cli-geotools ---
[INFO] Surefire report directory: /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/surefire-reports

-------------------------------------------------------
 T E S T S
-------------------------------------------------------

-------------------------------------------------------
 T E S T S
-------------------------------------------------------
Picked up JAVA_TOOL_OPTIONS: -Xmx2G -Djava.io.tmpdir=/tmp/genie.geogig
Picked up JAVA_TOOL_OPTIONS: -Xmx2G -Djava.io.tmpdir=/tmp/genie.geogig
Picked up JAVA_TOOL_OPTIONS: -Xmx2G -Djava.io.tmpdir=/tmp/genie.geogig
Picked up JAVA_TOOL_OPTIONS: -Xmx2G -Djava.io.tmpdir=/tmp/genie.geogig
Picked up JAVA_TOOL_OPTIONS: -Xmx2G -Djava.io.tmpdir=/tmp/genie.geogig
Picked up JAVA_TOOL_OPTIONS: -Xmx2G -Djava.io.tmpdir=/tmp/genie.geogig
Picked up JAVA_TOOL_OPTIONS: -Xmx2G -Djava.io.tmpdir=/tmp/genie.geogig
Picked up JAVA_TOOL_OPTIONS: -Xmx2G -Djava.io.tmpdir=/tmp/genie.geogig
Picked up JAVA_TOOL_OPTIONS: -Xmx2G -Djava.io.tmpdir=/tmp/genie.geogig
Picked up JAVA_TOOL_OPTIONS: -Xmx2G -Djava.io.tmpdir=/tmp/genie.geogig
Picked up JAVA_TOOL_OPTIONS: -Xmx2G -Djava.io.tmpdir=/tmp/genie.geogig
Picked up JAVA_TOOL_OPTIONS: -Xmx2G -Djava.io.tmpdir=/tmp/genie.geogig
Picked up JAVA_TOOL_OPTIONS: -Xmx2G -Djava.io.tmpdir=/tmp/genie.geogig
Picked up JAVA_TOOL_OPTIONS: -Xmx2G -Djava.io.tmpdir=/tmp/genie.geogig
Picked up JAVA_TOOL_OPTIONS: -Xmx2G -Djava.io.tmpdir=/tmp/genie.geogig
Running org.locationtech.geogig.geotools.cli.geojson.GeoJsonExportTest
Running org.locationtech.geogig.geotools.cli.geojson.GeoJsonImportTest
Running org.locationtech.geogig.geotools.cli.shp.ShpExportTest
Running org.locationtech.geogig.geotools.cli.shp.RunShpFunctionalTest
Running org.locationtech.geogig.geotools.cli.shp.ShpImportTest
Running org.locationtech.geogig.geotools.cli.postgis.PGImportTest
Running org.locationtech.geogig.geotools.cli.postgis.PGListTest
Running org.locationtech.geogig.geotools.cli.postgis.PGDescribeTest
Running org.locationtech.geogig.geotools.cli.postgis.PGExportTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgDescribeTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgPullTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgListTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgExportTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgImportTest
Running org.locationtech.geogig.geotools.cli.geopkg.RunGeoPkgFunctionalTest
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
Feature: "shp export" command
    In order to export data to Geogig
    As a Geogig User
    I want to export from the repository to a shapefile
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
Feature: "geopkg describe" command
    In order to understand the structure of a table in a GeoPackage file
    As a Geogig User
    I want Geogig to describe the table
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
Usage: geogig describe [options]
  Options:
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test226452574738464760.gpkg
  * --table, -t
       Table to describe.
       Default: <empty string>
    --user, -U
       User name.  Default: user
       Default: user

The shapefile '/home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp' could not be found, skipping...
The GeoJSON file 'file://nonexistent.geojson' could not be found, skipping...
Usage: geogig describe [options]
  Options:
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
  * --table, -t
       Table to describe.
       Default: <empty string>
    --user, -U
       User name.  Default: postgres
       Default: postgres

Importing from database database
Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Importing table2           (1/2)... 
Importing from database database

1 features inserted in 10.66 ms

Building final tree table2...

1 features tree built in 667.5 μs

Importing table1           (2/2)... 
Usage: geogig import [options] <geojson> [<geojson>]...
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --geom-name
       Name to use for geometry attribute, replacing the default one
       ('geometry')
    --geom-name-auto
       Uses the name of the geometry descriptor in the destination feature type
       Default: false

Usage: geogig export [options] <path> <geojson>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

2018-10-22T16:58:55.478-0400  SEVERE  Connection error: 
org.postgresql.util.PSQLException: The connection attempt failed.
	at org.postgresql.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:275)
	at org.postgresql.core.ConnectionFactory.openConnection(ConnectionFactory.java:49)
	at org.postgresql.jdbc.PgConnection.<init>(PgConnection.java:194)
	at org.postgresql.Driver.makeConnection(Driver.java:450)
	at org.postgresql.Driver.connect(Driver.java:252)
	at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:38)
	at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:582)
	at org.apache.commons.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:1556)
	at org.apache.commons.dbcp.BasicDataSource.createPoolableConnectionFactory(BasicDataSource.java:1545)
	at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1388)
	at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:1044)
	at org.geotools.data.jdbc.datasource.AbstractManageableDataSource.getConnection(AbstractManageableDataSource.java:42)
	at org.locationtech.geogig.geotools.cli.postgis.PGSupport.getDataStore(PGSupport.java:74)
	at org.locationtech.geogig.geotools.cli.postgis.PGDescribe.getDataStore(PGDescribe.java:40)
	at org.locationtech.geogig.geotools.cli.DataStoreDescribe.runInternal(DataStoreDescribe.java:51)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:67)
	at org.locationtech.geogig.geotools.cli.postgis.PGDescribeTest.testInvalidDatabaseParams(PGDescribeTest.java:76)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
	at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
	at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
	at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:17)
	at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:26)
	at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:27)
	at org.junit.rules.ExpectedException$ExpectedExceptionStatement.evaluate(ExpectedException.java:239)
	at org.junit.rules.ExternalResource$1.evaluate(ExternalResource.java:48)
	at org.junit.rules.RunRules.evaluate(RunRules.java:20)
	at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:325)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:78)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:57)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
Caused by: java.net.UnknownHostException: nonexistent
	at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:184)
	at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392)
	at java.net.Socket.connect(Socket.java:589)
	at org.postgresql.core.PGStream.<init>(PGStream.java:68)
	at org.postgresql.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:144)
	... 44 more

Importing from database database
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

2018-10-22T16:58:55.974-0400  SEVERE  Connection error: 
org.postgresql.util.PSQLException: The connection attempt failed.
	at org.postgresql.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:275)
	at org.postgresql.core.ConnectionFactory.openConnection(ConnectionFactory.java:49)
	at org.postgresql.jdbc.PgConnection.<init>(PgConnection.java:194)
	at org.postgresql.Driver.makeConnection(Driver.java:450)
	at org.postgresql.Driver.connect(Driver.java:252)
	at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:38)
	at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:582)
	at org.apache.commons.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:1556)
	at org.apache.commons.dbcp.BasicDataSource.createPoolableConnectionFactory(BasicDataSource.java:1545)
	at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1388)
	at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:1044)
	at org.geotools.data.jdbc.datasource.AbstractManageableDataSource.getConnection(AbstractManageableDataSource.java:42)
	at org.locationtech.geogig.geotools.cli.postgis.PGSupport.getDataStore(PGSupport.java:74)
	at org.locationtech.geogig.geotools.cli.postgis.PGList.getDataStore(PGList.java:42)
	at org.locationtech.geogig.geotools.cli.DataStoreList.runInternal(DataStoreList.java:41)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:67)
	at org.locationtech.geogig.geotools.cli.postgis.PGListTest.testInvalidDatabaseParams(PGListTest.java:69)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
	at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
	at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
	at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:17)
	at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:26)
	at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:27)
	at org.junit.rules.ExpectedException$ExpectedExceptionStatement.evaluate(ExpectedException.java:239)
	at org.junit.rules.ExternalResource$1.evaluate(ExternalResource.java:48)
	at org.junit.rules.RunRules.evaluate(RunRules.java:20)
	at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:325)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:78)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:57)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
Caused by: java.net.UnknownHostException: nonexistent
	at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:184)
	at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392)
	at java.net.Socket.connect(Socket.java:589)
	at org.postgresql.core.PGStream.<init>(PGStream.java:68)
	at org.postgresql.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:144)
	... 44 more

Fetching table...

Exporting from WORK_HEAD:Points to Points... 
100%
WORK_HEAD:Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit6509185286219758268/repo40886879/TestPoints.geojson
The shapefile 'file://nonexistent.shp' could not be found, skipping...
Fetching feature types...
 - GeoJsonLikeTable
 - GeoJsonLikeTable2
 - shpLikeTable
 - shpLikeTable2
 - table1
 - table2
 - table3
 - table4
Importing from GeoJSON /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/geojson/sample.geojson

Importing feature          (1/1)... 
2018-10-22T16:58:57.475-0400  SEVERE  Connection error: 
org.postgresql.util.PSQLException: The connection attempt failed.
	at org.postgresql.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:275)
	at org.postgresql.core.ConnectionFactory.openConnection(ConnectionFactory.java:49)
	at org.postgresql.jdbc.PgConnection.<init>(PgConnection.java:194)
	at org.postgresql.Driver.makeConnection(Driver.java:450)
	at org.postgresql.Driver.connect(Driver.java:252)
	at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:38)
	at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:582)
	at org.apache.commons.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:1556)
	at org.apache.commons.dbcp.BasicDataSource.createPoolableConnectionFactory(BasicDataSource.java:1545)
	at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1388)
	at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:1044)
	at org.geotools.data.jdbc.datasource.AbstractManageableDataSource.getConnection(AbstractManageableDataSource.java:42)
	at org.locationtech.geogig.geotools.cli.postgis.PGSupport.getDataStore(PGSupport.java:74)
	at org.locationtech.geogig.geotools.cli.postgis.PGImport.getDataStore(PGImport.java:39)
	at org.locationtech.geogig.geotools.cli.DataStoreImport.runInternal(DataStoreImport.java:95)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:67)
	at org.locationtech.geogig.geotools.cli.postgis.PGImportTest.testInvalidDatabaseParams(PGImportTest.java:100)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
	at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
	at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
	at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:17)
	at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:26)
	at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:27)
	at org.junit.rules.ExpectedException$ExpectedExceptionStatement.evaluate(ExpectedException.java:239)
	at org.junit.rules.ExternalResource$1.evaluate(ExternalResource.java:48)
	at org.junit.rules.RunRules.evaluate(RunRules.java:20)
	at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:325)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:78)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:57)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
Caused by: java.net.UnknownHostException: nonexistent
	at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:184)
	at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392)
	at java.net.Socket.connect(Socket.java:589)
	at org.postgresql.core.PGStream.<init>(PGStream.java:68)
	at org.postgresql.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:144)
	... 44 more

Fetching feature types...
1%
2 features inserted in 744.5 ms

Building final tree importedTable...

2 features tree built in 15.55 ms
100%
/home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/geojson/sample.geojson imported successfully.
Fetching feature types...
Importing from database database

Importing table2           (1/2)... 

Exporting from Points to Points... 
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit5690933298844273832/repo72969339/TestPoints.geojson
Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Fetching table...
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: postgres
       Default: postgres

Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 11.294 sec - in org.locationtech.geogig.geotools.cli.postgis.PGListTest
0%
1 features inserted in 14.50 ms

Building final tree table2...

1 features tree built in 913.6 μs

Importing table1           (2/2)... 
Fetching table...
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 11.612 sec - in org.locationtech.geogig.geotools.cli.geojson.GeoJsonImportTest

Exporting from Points to Points... 
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit862772656583333804/repo541544141/TestPoints.geojson

Exporting from Lines to Lines... 
Lines exported successfully to /opt/public/hipp/ramdisk/geogig/junit862772656583333804/repo541544141/TestPoints.geojson
Usage: geogig import [options] <shapefile> [<shapefile>]...
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --charset
       Use the specified charset to decode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    -f, --cql-filter
       GetoTools ECQL filter
    --create, -c
       Only create the schema, do not actually import its features
       Default: false
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false

Importing from database database
Tests run: 6, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 11.867 sec - in org.locationtech.geogig.geotools.cli.geojson.GeoJsonExportTest
Fetching table...
Tests run: 8, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.357 sec - in org.locationtech.geogig.geotools.cli.postgis.PGDescribeTest
Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Importing table4           (1/8)... 

Importing table3           (2/8)... 

1 features inserted in 2.632 ms

Building final tree table3...

1 features tree built in 674.8 μs

Importing table2           (3/8)... 

1 features inserted in 2.138 ms

Building final tree table2...

1 features tree built in 1.017 ms

Importing table1           (4/8)... 

2 features inserted in 2.209 ms

Building final tree table1...

2 features tree built in 812.8 μs

Importing shpLikeTable2    (5/8)... 

1 features inserted in 1.873 ms

Building final tree shpLikeTable2...

1 features tree built in 774.7 μs
Importing from database database

Importing shpLikeTable     (6/8)... 

Importing table1           (1/1)... 

2 features inserted in 2.569 ms

Building final tree table1...

2 features tree built in 845.0 μs
100%
Import successful.

1 features inserted in 15.89 ms

Building final tree shpLikeTable...

1 features tree built in 927.2 μs

Importing GeoJsonLikeTa... (7/8)... 
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false


1 features inserted in 994.6 μs

Building final tree GeoJsonLikeTable2...

1 features tree built in 351.6 μs

Importing GeoJsonLikeTable (8/8)... 

1 features inserted in 982.3 μs

Building final tree GeoJsonLikeTable...

1 features tree built in 420.7 μs
100%
/home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp imported successfully.
Importing from database database

Exporting from WORK_HEAD:Points to testTable... 
100%
WORK_HEAD:Points exported successfully to testTable

Exporting from Lines to testTable... 
Lines exported successfully to testTable
Tests run: 10, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.24 sec - in org.locationtech.geogig.geotools.cli.shp.ShpImportTest

Exporting from Points to Points... 
100%
Points exported successfully to Points
Usage: geogig import [options]
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --all
       Import all tables.
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    -f, --cql-filter
       GetoTools ECQL filter
    --database, -D
       The database to connect to.  Default: database
       Default: database
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --table, -t
       Table to import.
       Default: <empty string>
    --user, -U
       User name.  Default: postgres
       Default: postgres

Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --overwrite, -o
       Overwrite output table
       Default: false
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: postgres
       Default: postgres

Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.238 sec - in org.locationtech.geogig.geotools.cli.postgis.PGExportTest
Importing from database database

Importing table4           (1/8)... 

Importing table3           (2/8)... 

1 features inserted in 2.068 ms

Building final tree table3...

1 features tree built in 420.9 μs

Importing table2           (3/8)... 

1 features inserted in 1.400 ms

Building final tree table2...

1 features tree built in 415.3 μs

Importing table1           (4/8)... 

2 features inserted in 1.895 ms

Building final tree table1...

2 features tree built in 497.5 μs

Importing shpLikeTable2    (5/8)... 
2018-10-22T16:59:02.547-0400  SEVERE  There's code using JDBC based datastore and not disposing them. This may lead to temporary loss of database connections. Please make sure all data access code calls DataStore.dispose() before freeing all references to it

1 features inserted in 1.313 ms

Building final tree shpLikeTable2...

1 features tree built in 584.2 μs

Importing shpLikeTable     (6/8)... 

1 features inserted in 1.180 ms

Building final tree shpLikeTable...

1 features tree built in 523.2 μs

Importing GeoJsonLikeTa... (7/8)... 

1 features inserted in 1.140 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 352.1 μs

Importing GeoJsonLikeTable (8/8)... 

1 features inserted in 941.5 μs

Building final tree GeoJsonLikeTable...

1 features tree built in 354.0 μs
100%
Import successful.

Exporting from WORK_HEAD:Points to TestPoints... 
Tests run: 12, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.698 sec - in org.locationtech.geogig.geotools.cli.postgis.PGImportTest
67%
100%
WORK_HEAD:Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit3716627275186216075/repo1947502603/TestPoints.shp

Exporting from Points to Points... 

Exporting from Points to Points... 

Exporting from Points to TestPoints... 
67%
67%
100%
Points exported successfully to Points
100%
Points exported successfully to Points

Exporting repository metadata from 'HEAD:Points' (commit b8fbce47eb5a7dae513253d449c07b8b9bce098f)...

Creating audit metadata for table 'Points'

Exporting repository metadata from 'HEAD:Points' (commit d3c91c8a5695d1ca7fca3736f2affa7bc897ed78)...

Creating audit metadata for table 'Points'
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test6529268992697158827.gpkg

Importing Points           (1/2)... 

Exporting from Points to TestPoints... 

Importing changes to table Points onto feature tree Points...
0%
3 features inserted in 15.98 ms

Building final tree Points...

3 features tree built in 1.166 ms

Importing Lines            (2/2)... 
Fetching table...
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
Fetching feature types...
	Type      : Point
----------------------------------------
 - GeoJsonLikeTable
 - GeoJsonLikeTable2
 - shpLikeTable
 - shpLikeTable2
 - table1
 - table2
 - table3
 - table4
67%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit3914590075830510834/repo-30228273/TestPoints.shp
Fetching feature types...
1%
3 features inserted in 4.605 ms

Building final tree Lines...

3 features tree built in 814.1 μs
100%
Import successful.
Import successful.
Changes committed and merge at 2eb30425d550452a7b628f62b65e441aeb83c5ab
Fetching feature types...
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: database.gpkg
    --user, -U
       User name.  Default: user
       Default: user

Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 20.34 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgListTest

Exporting from Points to TestPoints... 
67%
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: database.gpkg
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    -i, --interchange
       Export as geogig mobile interchange format
       Default: false
    --overwrite, -o
       Overwrite output table
       Default: false
    --user, -U
       User name.  Default: user
       Default: user

100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit1975571180063062512/repo1371848193/TestPoints.shp

Exporting from Lines to TestPoints... 

  Scenario: Try exporting from an empty directory                    # ShpExport.feature:6
    Given I am in an empty directory                                 # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "shp export Points Points.shp"            # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should start with "Not in a geogig repository" # DefaultStepDefinitions.the_response_should_start_with(String)
Lines exported successfully to /opt/public/hipp/ramdisk/geogig/junit1975571180063062512/repo1371848193/TestPoints.shp
Fetching table...Could not find the specified table.
Tests run: 10, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 21.989 sec - in org.locationtech.geogig.geotools.cli.shp.ShpExportTest

Exporting from Points to Points... 
100%
Points exported successfully to Points

Exporting from WORK_HEAD:Points to Points... 

Exporting repository metadata from 'HEAD:Points' (commit af288b519f3e9743afe794d5c23811cae022cc31)...

Creating audit metadata for table 'Points'
100%
WORK_HEAD:Points exported successfully to Points
Fetching table...
Tests run: 8, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 23.493 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgDescribeTest
Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test1566178342884822948.gpkg

Importing changes to table Points onto feature tree Points...

Importing Points           (1/1)... 
Import successful.
Changes committed and merge at 15b49056129f3106e5bddd8c332a339e6cd259f3
0%
3 features inserted in 4.202 ms

Building final tree Points...

3 features tree built in 889.4 μs
100%
Import successful.

Exporting from WORK_HEAD:Lines to Lines... 
Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 24.507 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgImportTest
WORK_HEAD:Lines exported successfully to Lines

  Scenario: Try describing a GeoPackage table from an empty directory                    # GeoPkgDescribe.feature:6
    Given I am in an empty directory                                                     # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg describe --table test" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."               # DefaultStepDefinitions.the_response_should_contain(String)

Exporting from Points to Points... 
100%
Points exported successfully to Points
Exporting from Points to Points... 100.0
Points exported successfully to Points.shp

Exporting repository metadata from 'HEAD:Points' (commit 0b381195c92b27884e2286adc73188cb58ce0d69)...

Creating audit metadata for table 'Points'

Importing changes to table Points onto feature tree Points...
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 26.322 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgPullTest

Exporting from Points to Points... 
100%
Points exported successfully to Points

  Scenario: Try exporting a feature type                                          # ShpExport.feature:11
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                        # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "shp export -o Points Points.shp"                      # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)
Fetching table...Table : Points----------------------------------------	Property  : pp	Type      : Point----------------------------------------	Property  : ip	Type      : Integer----------------------------------------	Property  : sp	Type      : String----------------------------------------

Exporting from Points to Points... 
100%
Points exported successfully to Points

Exporting from Lines to Points... 
Lines exported successfully to Points
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 30.941 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgExportTest

  Scenario: Try describing a GeoPackage table                                              # GeoPkgDescribe.feature:11
    Given I have a repository                                                              # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg describe --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Table : Points"                                      # DefaultStepDefinitions.the_response_should_contain(String)
pathspec 'WRONGTABLE' did not match any valid path
Fetching table...Could not find the specified table.

  Scenario: Try to describe a GeoPackage table that doesn't exit in the database                      # GeoPkgDescribe.feature:16
    Given I have a repository                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg describe --table nonexistant_table" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."                            # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg export" command
    In order to export data to Geogig
    As a Geogig User
    I want to export from the repository into a GeoPackage file

  Scenario: Try exporting an inexistent feature type                                      # ShpExport.feature:17
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "shp export WRONGTABLE Points.shp"                             # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "pathspec 'WRONGTABLE' did not match any valid path" # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting from an empty directory                                 # GeoPkgExport.feature:6
    Given I am in an empty directory                                              # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg export Points Points" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository:"             # DefaultStepDefinitions.the_response_should_start_with(String)
Exporting from Points to Points... Error: The selected tree contains mixed feature types. Use --defaulttype or --featuretype <feature_type_ref> to export.
Exporting from Points to Points... Error: The selected tree contains mixed feature types. Use --defaulttype or --featuretype <feature_type_ref> to export.

  Scenario: Try exporting with mixed feature types                                                    # ShpExport.feature:23
    Given I have a repository                                                                         # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                                        # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o Points Points.shp"                                          # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "The selected tree contains mixed feature types"                 # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Use --defaulttype or --featuretype <feature_type_ref> to export" # DefaultStepDefinitions.the_response_should_contain(String)
Exporting from Points to MyPoints... 100.0
Points exported successfully to MyPoints

  Scenario: Try exporting a feature type                                               # GeoPkgExport.feature:11
    Given I have a repository                                                          # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                             # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export -o Points MyPoints" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "Points exported successfully to MyPoints"        # DefaultStepDefinitions.the_response_should_contain(String)
Exporting from Points to Points... Points exported successfully to Points.shp

  Scenario: Try exporting with mixed feature types using the default feature type # ShpExport.feature:30
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                    # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o --defaulttype Points Points.shp"        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)
pathspec 'WRONGTABLE' did not match any valid path

  Scenario: Try exporting an inexistent feature type                                      # GeoPkgExport.feature:17
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export WRONGTABLE Points" on a new GeoPackage file     # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "pathspec 'WRONGTABLE' did not match any valid path" # DefaultStepDefinitions.the_response_should_contain(String)
Exporting from Points to Points... Points exported successfully to Points.shp
The selected table already exists. Use -o to overwrite

  Scenario: Try exporting with mixed feature types using --alter                  # ShpExport.feature:36
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                    # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o --defaulttype Points Points.shp"        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting to a table that already exists                                      # GeoPkgExport.feature:23
    Given I have a repository                                                                 # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                    # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export Points Points" on an existing GeoPackage file       # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "The selected table already exists. Use -o to overwrite" # DefaultStepDefinitions.the_response_should_contain(String)
Exporting from HEAD:Points to CommitedPoints... HEAD:Points exported successfully to CommitedPoints.shp

  Scenario: Try exporting a table from HEAD                                               # ShpExport.feature:42
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "commit -m TestCommit"                                         # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "shp export -o HEAD:Points CommitedPoints.shp"                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to CommitedPoints.shp" # DefaultStepDefinitions.the_response_should_contain(String)

7 Scenarios (7 passed)
29 Steps (29 passed)
0m46.202s

Tests run: 36, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 47.499 sec - in org.locationtech.geogig.geotools.cli.shp.RunShpFunctionalTest
Exporting from HEAD:Points to CommitedPoints... HEAD:Points exported successfully to CommitedPoints

  Scenario: Try exporting a table from HEAD                                                       # GeoPkgExport.feature:29
    Given I have a repository                                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                        # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "commit -m TestCommit"                                                 # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "geopkg export -o HEAD:Points CommitedPoints" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "Points exported successfully to CommitedPoints"             # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg import" command
    In order to import data to Geogig
    As a Geogig User
    I want to import one or more tables from a GeoPackage file

  Scenario: Try importing into an empty directory                                        # GeoPkgImport.feature:6
    Given I am in an empty directory                                                     # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg import --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"                     # DefaultStepDefinitions.the_response_should_start_with(String)
Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test1469835962869492987.gpkgImporting Points           (1/1)... 3 features inserted in 8.341 msBuilding final tree Points...3 features tree built in 1.046 ms100%
Import successful.

  Scenario: Try to import a GeoPackage table                                             # GeoPkgImport.feature:11
    Given I have a repository                                                            # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Import successful."                                # DefaultStepDefinitions.the_response_should_contain(String)
Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test3450406903707534509.gpkgImporting Points           (1/2)... 3 features inserted in 2.685 msBuilding final tree Points...3 features tree built in 1.191 msImporting Lines            (2/2)... 3 features inserted in 2.706 msBuilding final tree Lines...3 features tree built in 929.0 μs100%
Import successful.

  Scenario: Try to import a full GeoPackage file                                # GeoPkgImport.feature:16
    Given I have a repository                                                   # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --all" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Import successful."                       # DefaultStepDefinitions.the_response_should_contain(String)
Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test7188851519310175543.gpkgCould not find the specified table.

  Scenario: Try to import a GeoPackage table that doesn't exit in the file                          # GeoPkgImport.feature:21
    Given I have a repository                                                                       # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table nonexistant_table" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."                          # DefaultStepDefinitions.the_response_should_contain(String)
Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test6697746870773999247.gpkgNo tables specified for import. Specify --all or --table <table>.

  Scenario: Try to import without specifying table or -all                                               # GeoPkgImport.feature:26
    Given I have a repository                                                                            # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import" on an existing GeoPackage file                                # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "No tables specified for import. Specify --all or --table <table>." # DefaultStepDefinitions.the_response_should_contain(String)
Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test4714221175502977022.gpkgSpecify --all or --table <table>, both cannot be set.

  Scenario: Try to import with table and -all                                                  # GeoPkgImport.feature:31
    Given I have a repository                                                                  # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table Points --all" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Specify --all or --table <table>, both cannot be set."   # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg list" command
    In order to know all of the features available in a GeoPackage file
    As a Geogig User
    I want to list all of the features

  Scenario: Try listing from an empty directory                         # GeoPkgList.feature:6
    Given I am in an empty directory                                    # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg list" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"    # DefaultStepDefinitions.the_response_should_start_with(String)
Fetching feature types... - Lines - Points

  Scenario: Try listing from a valid directory                          # GeoPkgList.feature:11
    Given I have a repository                                           # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg list" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Points"                           # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg pull" command
    In order to import data to Geogig
    As a Geogig User
    I want to import one or more tables from a GeoPackage file with the interchange format

  Scenario: Try pulling into an empty directory                                        # GeoPkgPull.feature:6
    Given I am in an empty directory                                                   # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg pull --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"                   # DefaultStepDefinitions.the_response_should_start_with(String)
Commit message not provided

  Scenario: Try to pull a GeoPackage table without commit message                                  # GeoPkgPull.feature:11
    Given I have a repository                                                                      # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Commit message not provided"                                 # DefaultStepDefinitions.the_response_should_contain(String)
Importing changes to table Points onto feature tree Points...Import successful.Changes committed and merge at 627574bb5dd250483557c83bacdbfa019d43460f

  Scenario: Try to pull a GeoPackage table                                                                            # GeoPkgPull.feature:16
    Given I have a repository                                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Import successful."                                                             # DefaultStepDefinitions.the_response_should_contain(String)
Unable to import: No table to import.

  Scenario: Try to pull a GeoPackage table that doesn't exit in the file                                                         # GeoPkgPull.feature:21
    Given I have a repository                                                                                                    # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table nonexistant_table --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Unable to import: No table to import."                                                     # DefaultStepDefinitions.the_response_should_contain(String)
Importing changes to table Points onto feature tree Points...Import successful.Changes committed and merge at 8a29b622642923d2eceeb397727cab4f11e7e396

  Scenario: Try to pull without specifying table                                                       # GeoPkgPull.feature:26
    Given I have a repository                                                                          # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Import successful."                                              # DefaultStepDefinitions.the_response_should_contain(String)
Importing changes to table Points onto feature tree Points...CONFLICT: Merge conflict in Points/Points.1Automatic merge failed. Fix conflicts and then commit the result.

  Scenario: Try to pull a GeoPackage table with a conflict                                                                            # GeoPkgPull.feature:31
    Given I have a repository                                                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points --message imported" on an existing interchange GeoPackage file with a conflict # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file_with_conflict(String)
    Then the response should contain "CONFLICT: Merge conflict in"                                                                    # DefaultStepDefinitions.the_response_should_contain(String)

22 Scenarios (22 passed)
71 Steps (71 passed)
1m5.898s

Tests run: 93, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 67.467 sec - in org.locationtech.geogig.geotools.cli.geopkg.RunGeoPkgFunctionalTest

Results :

Tests run: 229, Failures: 0, Errors: 0, Skipped: 0

[JENKINS] Recording test results
[INFO] 
[INFO] --- maven-jar-plugin:3.0.2:jar (default-jar) @ geogig-cli-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/geogig-cli-geotools-1.4-SNAPSHOT.jar
[INFO] 
[INFO] --- maven-jar-plugin:3.0.2:test-jar (default) @ geogig-cli-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/geogig-cli-geotools-1.4-SNAPSHOT-tests.jar
[INFO] 
[INFO] >>> maven-source-plugin:3.0.1:jar (attach-sources) > generate-sources @ geogig-cli-geotools >>>
[INFO] 
[INFO] --- git-commit-id-plugin:2.2.2:revision (default) @ geogig-cli-geotools ---
[WARNING] Failed to getClass for org.apache.maven.plugins.source.SourceJarMojo
[INFO] 
[INFO] <<< maven-source-plugin:3.0.1:jar (attach-sources) < generate-sources @ geogig-cli-geotools <<<
[INFO] 
[INFO] 
[INFO] --- maven-source-plugin:3.0.1:jar (attach-sources) @ geogig-cli-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/geogig-cli-geotools-1.4-SNAPSHOT-sources.jar
[INFO] 
[INFO] >>> maven-source-plugin:3.0.1:test-jar (attach-sources) > generate-sources @ geogig-cli-geotools >>>
[INFO] 
[INFO] --- git-commit-id-plugin:2.2.2:revision (default) @ geogig-cli-geotools ---
[WARNING] Failed to getClass for org.apache.maven.plugins.source.TestSourceJarMojo
[INFO] 
[INFO] <<< maven-source-plugin:3.0.1:test-jar (attach-sources) < generate-sources @ geogig-cli-geotools <<<
[INFO] 
[INFO] 
[INFO] --- maven-source-plugin:3.0.1:test-jar (attach-sources) @ geogig-cli-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/geogig-cli-geotools-1.4-SNAPSHOT-test-sources.jar
[INFO] 
[INFO] --- maven-install-plugin:2.4:install (default-install) @ geogig-cli-geotools ---
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/geogig-cli-geotools-1.4-SNAPSHOT.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/.repository/org/locationtech/geogig/geogig-cli-geotools/1.4-SNAPSHOT/geogig-cli-geotools-1.4-SNAPSHOT.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/pom.xml to /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/.repository/org/locationtech/geogig/geogig-cli-geotools/1.4-SNAPSHOT/geogig-cli-geotools-1.4-SNAPSHOT.pom
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/geogig-cli-geotools-1.4-SNAPSHOT-tests.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/.repository/org/locationtech/geogig/geogig-cli-geotools/1.4-SNAPSHOT/geogig-cli-geotools-1.4-SNAPSHOT-tests.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/geogig-cli-geotools-1.4-SNAPSHOT-sources.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/.repository/org/locationtech/geogig/geogig-cli-geotools/1.4-SNAPSHOT/geogig-cli-geotools-1.4-SNAPSHOT-sources.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/geotools/target/geogig-cli-geotools-1.4-SNAPSHOT-test-sources.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/.repository/org/locationtech/geogig/geogig-cli-geotools/1.4-SNAPSHOT/geogig-cli-geotools-1.4-SNAPSHOT-test-sources.jar
[JENKINS] Archiving disabled