SuccessConsole Output

Skipping 495 KB.. Full Log
b1c96e26754beAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:05:07 -0300Subject: Commit4Commit:  6a546c4f7a9ed037c4a8b2a5e6ebe301e19c0d0cAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:05:07 -0300Subject: Commit5Commit:  9d151e711a68f298e2a1064fab16116edb77d0e9Author:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:06 -0300Subject: Commit1
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to rebase a nonexistant branch': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to graft a branch onto another branch             # Rebase.feature:34
    Given I have a repository                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have several branches                                   # DefaultStepDefinitions.I_have_several_branches()
    When I run the command "rebase branch1 branch2 --onto master" # DefaultStepDefinitions.I_run_the_command_X(String)
    And I run the command "log"                                   # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Commit1"                    # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should not contain "Commit2"                 # DefaultStepDefinitions.the_response_should_not_contain(String)
    And the response should not contain "Commit3"                 # DefaultStepDefinitions.the_response_should_not_contain(String)
    And the response should contain "Commit4"                     # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Commit5"                     # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to rebase to a nonexistant upstream': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to rebase a nonexistant branch                          # Rebase.feature:45
    Given I have a repository                                           # DefaultStepDefinitions.I_have_a_repository()
    And I have several branches                                         # DefaultStepDefinitions.I_have_several_branches()
    When I run the command "rebase master nonexistant"                  # DefaultStepDefinitions.I_run_the_command_X(String)
    Then it should answer "The branch reference could not be resolved." # DefaultStepDefinitions.it_should_answer_exactly(String)
    And it should exit with non-zero exit code                          # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to graft a branch onto a nonexistant branch': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to rebase to a nonexistant upstream                       # Rebase.feature:52
    Given I have a repository                                             # DefaultStepDefinitions.I_have_a_repository()
    And I have several branches                                           # DefaultStepDefinitions.I_have_several_branches()
    When I run the command "rebase nonexistant branch1"                   # DefaultStepDefinitions.I_run_the_command_X(String)
    Then it should answer "The upstream reference could not be resolved." # DefaultStepDefinitions.it_should_answer_exactly(String)
    And it should exit with non-zero exit code                            # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to rebase from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to graft a branch onto a nonexistant branch           # Rebase.feature:59
    Given I have a repository                                         # DefaultStepDefinitions.I_have_a_repository()
    And I have several branches                                       # DefaultStepDefinitions.I_have_several_branches()
    When I run the command "rebase master branch1 --onto nonexistant" # DefaultStepDefinitions.I_run_the_command_X(String)
    Then it should answer "The onto reference could not be resolved." # DefaultStepDefinitions.it_should_answer_exactly(String)
    And it should exit with non-zero exit code                        # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to rebase with conflicts and skip': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to rebase from an empty directory                    # Rebase.feature:66
    Given I am in an empty directory                                 # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "rebase master branch1"                   # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should start with "Not in a geogig repository" # DefaultStepDefinitions.the_response_should_start_with(String)
    And it should exit with non-zero exit code                       # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
0.0
error: could not apply 0f8f0fd4 Commit2CONFLICT: conflict in Points/Points.1When you have fixed this conflicts, run 'geogig rebase --continue' to continue rebasing.If you would prefer to skip this commit, instead run 'geogig rebase --skip.To check out the original branch and stop rebasing, run 'geogig rebase --abort'
Commit:  54b84ac3fb60cf805c23c8a3c10159997e8b0570Author:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:17 -0300Subject: Commit3Commit:  5d33f71545e8bfcb0c84bcfc39091c4f0dd37ac1Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:05:18 -0300Subject: Commit4Commit:  4b1c93d177ed38c879317f046ad90ed0ad95fc9bAuthor:  John Doe <JohnDoe@example.com>Date:    (2 seconds ago) 2018-09-30 21:05:17 -0300Subject: Commit1
Commit:  54b84ac3fb60cf805c23c8a3c10159997e8b0570Author:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:17 -0300Subject: Commit3Commit:  5d33f71545e8bfcb0c84bcfc39091c4f0dd37ac1Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:05:18 -0300Subject: Commit4Commit:  4b1c93d177ed38c879317f046ad90ed0ad95fc9bAuthor:  John Doe <JohnDoe@example.com>Date:    (2 seconds ago) 2018-09-30 21:05:17 -0300Subject: Commit1
Commit:  54b84ac3fb60cf805c23c8a3c10159997e8b0570Author:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:17 -0300Subject: Commit3Commit:  5d33f71545e8bfcb0c84bcfc39091c4f0dd37ac1Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:05:18 -0300Subject: Commit4Commit:  4b1c93d177ed38c879317f046ad90ed0ad95fc9bAuthor:  John Doe <JohnDoe@example.com>Date:    (2 seconds ago) 2018-09-30 21:05:17 -0300Subject: Commit1
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to rebase with conflicts and continue': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to rebase with conflicts and skip                            # Rebase.feature:72
    Given I have a repository                                                # DefaultStepDefinitions.I_have_a_repository()
    And I have conflicting branches                                          # DefaultStepDefinitions.I_have_conflicting_branches()
    When I run the command "rebase branch1 master"                           # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "CONFLICT"                              # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code                               # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
    When I run the command "rebase --skip"                                   # DefaultStepDefinitions.I_run_the_command_X(String)
    And I run the command "log"                                              # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Commit1"                               # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should not contain "Commit2"                            # DefaultStepDefinitions.the_response_should_not_contain(String)
    And the response should contain "Commit3"                                # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Commit4"                                # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain variable "{@ObjectId|localrepo|branch1}" # DefaultStepDefinitions.checkResponseTextContains(String)
Commit:  57bde97692996de62170b3c53cbbb2ca218b71eeAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:21 -0300Subject: Commit3Commit:  8bd1b65cee71c36d6512fc5c382cb645383482fcAuthor:  John Doe <JohnDoe@example.com>Date:    (2 seconds ago) 2018-09-30 21:05:21 -0300Subject: Commit2Commit:  56a5e828cd4fc243b715ac1c86d9999748e6a19cAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:22 -0300Subject: Commit4Commit:  c18d4c1ececd69b1e74d9962562c2b8a42a56a6eAuthor:  John Doe <JohnDoe@example.com>Date:    (2 seconds ago) 2018-09-30 21:05:20 -0300Subject: Commit1
Commit:  57bde97692996de62170b3c53cbbb2ca218b71eeAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:21 -0300Subject: Commit3Commit:  8bd1b65cee71c36d6512fc5c382cb645383482fcAuthor:  John Doe <JohnDoe@example.com>Date:    (2 seconds ago) 2018-09-30 21:05:21 -0300Subject: Commit2Commit:  56a5e828cd4fc243b715ac1c86d9999748e6a19cAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:22 -0300Subject: Commit4Commit:  c18d4c1ececd69b1e74d9962562c2b8a42a56a6eAuthor:  John Doe <JohnDoe@example.com>Date:    (2 seconds ago) 2018-09-30 21:05:20 -0300Subject: Commit1
Commit:  57bde97692996de62170b3c53cbbb2ca218b71eeAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:21 -0300Subject: Commit3Commit:  8bd1b65cee71c36d6512fc5c382cb645383482fcAuthor:  John Doe <JohnDoe@example.com>Date:    (2 seconds ago) 2018-09-30 21:05:21 -0300Subject: Commit2Commit:  56a5e828cd4fc243b715ac1c86d9999748e6a19cAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:22 -0300Subject: Commit4Commit:  c18d4c1ececd69b1e74d9962562c2b8a42a56a6eAuthor:  John Doe <JohnDoe@example.com>Date:    (2 seconds ago) 2018-09-30 21:05:20 -0300Subject: Commit1
Commit:  57bde97692996de62170b3c53cbbb2ca218b71eeAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:21 -0300Subject: Commit3Commit:  8bd1b65cee71c36d6512fc5c382cb645383482fcAuthor:  John Doe <JohnDoe@example.com>Date:    (2 seconds ago) 2018-09-30 21:05:21 -0300Subject: Commit2Commit:  56a5e828cd4fc243b715ac1c86d9999748e6a19cAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:22 -0300Subject: Commit4Commit:  c18d4c1ececd69b1e74d9962562c2b8a42a56a6eAuthor:  John Doe <JohnDoe@example.com>Date:    (2 seconds ago) 2018-09-30 21:05:20 -0300Subject: Commit1
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to rebase with conflicts and abort': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to rebase with conflicts and continue                         # Rebase.feature:86
    Given I have a repository                                                 # DefaultStepDefinitions.I_have_a_repository()
    And I have conflicting branches                                           # DefaultStepDefinitions.I_have_conflicting_branches()
    And I run the command "rebase branch1 master"                             # DefaultStepDefinitions.I_run_the_command_X(String)
    And I have unstaged "points1"                                             # DefaultStepDefinitions.I_have_unstaged(String)
    And I run the command "add"                                               # DefaultStepDefinitions.I_run_the_command_X(String)
    And I run the command "rebase --continue"                                 # DefaultStepDefinitions.I_run_the_command_X(String)
    And I run the command "log"                                               # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Commit1"                                # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Commit2"                                 # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Commit3"                                 # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Commit4"                                 # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain variable "{@ObjectId|localrepo|branch1}"  # DefaultStepDefinitions.checkResponseTextContains(String)
    And the response should contain variable "{@ObjectId|localrepo|master~3}" # DefaultStepDefinitions.checkResponseTextContains(String)
0.0
Building final tree PointsTree Points staged in 678.0 μsRemoving 0 merged conflicts...Done. 1 unmerged conflicts.error: could not apply d2264ff2 Commit4CONFLICT: conflict in Points/Points.1When you have fixed this conflicts, run 'geogig rebase --continue' to continue rebasing.If you would prefer to skip this commit, instead run 'geogig rebase --skip.To check out the original branch and stop rebasing, run 'geogig rebase --abort'
Rebase aborted successfully.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to rebase --skip when no conflict exist': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to rebase with conflicts and abort          # Rebase.feature:101
    Given I have a repository                               # DefaultStepDefinitions.I_have_a_repository()
    And I have conflicting branches                         # DefaultStepDefinitions.I_have_conflicting_branches()
    When I run the command "rebase master branch1"          # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "CONFLICT"             # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code              # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
    When I run the command "rebase --abort"                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "aborted successfully" # DefaultStepDefinitions.the_response_should_contain(String)
Cannot skip. You are not in the middle of a rebase process.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to rebase --continue when no conflict exist': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to rebase --skip when no conflict exist # Rebase.feature:110
    Given I have a repository                           # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "rebase --skip"              # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Cannot skip"      # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code          # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
Cannot continue. You are not in the middle of a rebase process.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to rebase --abort when no conflict exist': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to rebase --continue when no conflict exist # Rebase.feature:116
    Given I have a repository                               # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "rebase --continue"              # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Cannot continue"      # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code              # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
Cannot abort. You are not in the middle of a rebase process.

  Scenario: Try to rebase --abort when no conflict exist # Rebase.feature:122
    Given I have a repository                            # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "rebase --abort"              # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Cannot abort"      # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code           # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
Feature: "rm" command
    In order to remove features from the repository
    As a Geogig User
    I want to delete features and trees from the working tree
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to delete a single feature': Using URIBuilder DefaultTestRepoURIBuilder
Deleting features...Staging changes...Computing result count...Deleted 1 feature(s)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to delete several features': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to delete a single feature                  # Remove.feature:6
    Given I have a repository                               # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                             # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                             # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                              # DefaultStepDefinitions.I_have_staged(String)
    And I run the command "commit -m Test"                  # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "rm Points/Points.1"             # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Deleted 1 feature(s)" # DefaultStepDefinitions.the_response_should_contain(String)
Deleting features...Staging changes...Computing result count...Deleted 2 feature(s)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to delete a whole tree': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to delete several features                      # Remove.feature:15
    Given I have a repository                                   # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                                 # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                                 # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                                  # DefaultStepDefinitions.I_have_staged(String)
    And I run the command "commit -m Test"                      # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "rm Points/Points.1 Points/Points.2" # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Deleted 2 feature(s)"     # DefaultStepDefinitions.the_response_should_contain(String)
Deleted Points treeStaging changes...Computing result count...Deleted 2 feature(s)Deleted 1 trees
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to delete a whole tree without the -r modifier': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to delete a whole tree                     # Remove.feature:24
    Given I have a repository                              # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                            # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                            # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                             # DefaultStepDefinitions.I_have_staged(String)
    And I run the command "commit -m Test"                 # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "rm Points -r "                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Deleted Points tree" # DefaultStepDefinitions.the_response_should_contain(String)
Cannot remove tree Points if recursive or truncate is not specified
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to delete an inexistent feature': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to delete a whole tree without the -r modifier                                             # Remove.feature:33
    Given I have a repository                                                                              # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                                                                            # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                                                                            # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                                                                             # DefaultStepDefinitions.I_have_staged(String)
    And I run the command "commit -m Test"                                                                 # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "rm Points"                                                                     # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Cannot remove tree Points if recursive or truncate is not specified" # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code                                                             # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
Deleting features...Staging changes...Computing result count...Deleted 0 feature(s)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Truncate a tree': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to delete an inexistent feature             # Remove.feature:43
    Given I have a repository                               # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                             # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                             # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                              # DefaultStepDefinitions.I_have_staged(String)
    And I run the command "commit -m Test"                  # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "rm Points/Wrong.1"              # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Deleted 0 feature(s)" # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code              # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
Truncated Points treeStaging changes...Computing result count...Deleted 2 feature(s)
Points 0Lines 1

  Scenario: Truncate a tree                                  # Remove.feature:53
    Given I have a repository                                # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                              # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                              # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                               # DefaultStepDefinitions.I_have_staged(String)
    When I run the command "rm Points -t "                   # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Truncated Points tree" # DefaultStepDefinitions.the_response_should_contain(String)
    When I run the command "ls-tree -s"                      # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points 0"              # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "reset" command
    In order to undo local changes
    As a Geogig User
    I want to reset the head, and optionally, the working tree and index to the state of another commit
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to do a mixed reset of all local changes': Using URIBuilder DefaultTestRepoURIBuilder
100.0
[b9a2c0e45be4656d31d32a6ddcff59dfa13d7bcb] TestCommitted, counting objects...3 features added, 0 changed, 0 deleted.
Unstaged changes after reset:M	Points/Points.1
# On branch master# Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      modified  Points#      modified  Points/Points.1# 2 total.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to do a hard reset of all local changes': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to do a mixed reset of all local changes             # Reset.feature:6
    Given I have a repository                                        # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                                      # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                                      # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                                       # DefaultStepDefinitions.I_have_staged(String)
    When I run the command "commit -m Test"                          # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "3 features added"              # DefaultStepDefinitions.the_response_should_contain(String)
    When I modify and add a feature                                  # DefaultStepDefinitions.I_modify_and_add_a_feature()
    And I run the command "reset --mixed"                            # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Unstaged changes after reset:" # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain 2 lines                          # DefaultStepDefinitions.the_response_should_contain_x_lines(int)
    When I run the command "status"                                  # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Changes not staged for commit" # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should not contain "Changes to be committed"    # DefaultStepDefinitions.the_response_should_not_contain(String)
100.0
[12786e59afc4b5678178797472acd2b0a259e78e] TestCommitted, counting objects...3 features added, 0 changed, 0 deleted.
# On branch masternothing to commit (working directory clean)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to do a soft reset of all local changes': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to do a hard reset of all local changes  # Reset.feature:21
    Given I have a repository                            # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                          # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                          # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                           # DefaultStepDefinitions.I_have_staged(String)
    When I run the command "commit -m Test"              # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "3 features added"  # DefaultStepDefinitions.the_response_should_contain(String)
    When I modify and add a feature                      # DefaultStepDefinitions.I_modify_and_add_a_feature()
    And I run the command "reset --hard"                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then it should answer ""                             # DefaultStepDefinitions.it_should_answer_exactly(String)
    When I run the command "status"                      # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "nothing to commit" # DefaultStepDefinitions.the_response_should_contain(String)
100.0
[82b8a0e9894c6309a1d10caebdd507515a8e7f78] TestCommitted, counting objects...3 features added, 0 changed, 0 deleted.
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      modified  Points#      modified  Points/Points.1# 2 total.#
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to do a mixed and hard reset of all local changes': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to do a soft reset of all local changes                  # Reset.feature:34
    Given I have a repository                                            # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                                          # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                                          # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                                           # DefaultStepDefinitions.I_have_staged(String)
    When I run the command "commit -m Test"                              # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "3 features added"                  # DefaultStepDefinitions.the_response_should_contain(String)
    When I modify and add a feature                                      # DefaultStepDefinitions.I_modify_and_add_a_feature()
    And I run the command "reset --soft"                                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then it should answer ""                                             # DefaultStepDefinitions.it_should_answer_exactly(String)
    When I run the command "status"                                      # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should not contain "Changes not staged for commit" # DefaultStepDefinitions.the_response_should_not_contain(String)
    And the response should contain "Changes to be committed"            # DefaultStepDefinitions.the_response_should_contain(String)
100.0
[8f48c009d40ba46d45daf5b930dca7752d713acd] TestCommitted, counting objects...3 features added, 0 changed, 0 deleted.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to do a mixed and soft reset of all local changes': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to do a mixed and hard reset of all local changes # Reset.feature:48
    Given I have a repository                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                                   # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                                   # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                                    # DefaultStepDefinitions.I_have_staged(String)
    When I run the command "commit -m Test"                       # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "3 features added"           # DefaultStepDefinitions.the_response_should_contain(String)
    When I modify and add a feature                               # DefaultStepDefinitions.I_modify_and_add_a_feature()
    And I run the command "reset --hard --mixed"                  # DefaultStepDefinitions.I_run_the_command_X(String)
    Then it should answer "you may only specify one mode."        # DefaultStepDefinitions.it_should_answer_exactly(String)
100.0
[6e413d84ec878d4a845e6eb749a4da2e57c004ea] TestCommitted, counting objects...3 features added, 0 changed, 0 deleted.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to reset from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to do a mixed and soft reset of all local changes # Reset.feature:59
    Given I have a repository                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                                   # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                                   # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                                    # DefaultStepDefinitions.I_have_staged(String)
    When I run the command "commit -m Test"                       # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "3 features added"           # DefaultStepDefinitions.the_response_should_contain(String)
    When I modify and add a feature                               # DefaultStepDefinitions.I_modify_and_add_a_feature()
    And I run the command "reset --soft --mixed"                  # DefaultStepDefinitions.I_run_the_command_X(String)
    Then it should answer "you may only specify one mode."        # DefaultStepDefinitions.it_should_answer_exactly(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to reset with no commits': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to reset from an empty directory                     # Reset.feature:70
    Given I am in an empty directory                                 # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "reset"                                   # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should start with "Not in a geogig repository" # DefaultStepDefinitions.the_response_should_start_with(String)
    And it should exit with non-zero exit code                       # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to reset to a nonexistant commit': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to reset with no commits                  # Reset.feature:76
    Given I have a repository                             # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "reset"                        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then it should answer "Commit could not be resolved." # DefaultStepDefinitions.it_should_answer_exactly(String)
    And it should exit with non-zero exit code            # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
100.0
[c655d2c42f5b928db30ade0103bcfd5ec5adeff0] TestCommitted, counting objects...3 features added, 0 changed, 0 deleted.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to do a reset of a specific path': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to reset to a nonexistant commit          # Reset.feature:82
    Given I have a repository                             # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                           # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                           # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                            # DefaultStepDefinitions.I_have_staged(String)
    When I run the command "commit -m Test"               # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "3 features added"   # DefaultStepDefinitions.the_response_should_contain(String)
    When I modify and add a feature                       # DefaultStepDefinitions.I_modify_and_add_a_feature()
    And I run the command "reset nonexistant"             # DefaultStepDefinitions.I_run_the_command_X(String)
    Then it should answer "Commit could not be resolved." # DefaultStepDefinitions.it_should_answer_exactly(String)
    And it should exit with non-zero exit code            # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
100.0
[0c7f217e1dbe40872a7010b0aae9432b9f826bbd] TestCommitted, counting objects...3 features added, 0 changed, 0 deleted.
Unstaged changes after reset:M	Points/Points.1
# On branch master# Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      modified  Points#      modified  Points/Points.1# 2 total.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to do a reset of a non-used path': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to do a reset of a specific path                     # Reset.feature:94
    Given I have a repository                                        # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                                      # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                                      # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                                       # DefaultStepDefinitions.I_have_staged(String)
    When I run the command "commit -m Test"                          # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "3 features added"              # DefaultStepDefinitions.the_response_should_contain(String)
    When I modify and add a feature                                  # DefaultStepDefinitions.I_modify_and_add_a_feature()
    And I run the command "reset --path Points"                      # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Unstaged changes after reset:" # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain 2 lines                          # DefaultStepDefinitions.the_response_should_contain_x_lines(int)
    When I run the command "status"                                  # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Changes not staged for commit" # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should not contain "Changes to be committed"    # DefaultStepDefinitions.the_response_should_not_contain(String)
100.0
[7326a9039e65cbb8b0d8d051d7dc319f3c1d5dee] TestCommitted, counting objects...3 features added, 0 changed, 0 deleted.
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      modified  Points#      modified  Points/Points.1# 2 total.#
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to do a reset of multiple paths': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to do a reset of a non-used path                         # Reset.feature:109
    Given I have a repository                                            # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                                          # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                                          # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                                           # DefaultStepDefinitions.I_have_staged(String)
    When I run the command "commit -m Test"                              # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "3 features added"                  # DefaultStepDefinitions.the_response_should_contain(String)
    When I modify and add a feature                                      # DefaultStepDefinitions.I_modify_and_add_a_feature()
    And I run the command "reset --path Lines"                           # DefaultStepDefinitions.I_run_the_command_X(String)
    Then it should answer ""                                             # DefaultStepDefinitions.it_should_answer_exactly(String)
    When I run the command "status"                                      # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should not contain "Changes not staged for commit" # DefaultStepDefinitions.the_response_should_not_contain(String)
    And the response should contain "Changes to be committed"            # DefaultStepDefinitions.the_response_should_contain(String)
100.0
[06beb5ca53e5368084fb317ef11d87f95071f3fe] TestCommitted, counting objects...3 features added, 0 changed, 0 deleted.
Unstaged changes after reset:M	Points/Points.1
# On branch master# Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      modified  Points#      modified  Points/Points.1# 2 total.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to reset to the state of another branch': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to do a reset of multiple paths                      # Reset.feature:123
    Given I have a repository                                        # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                                      # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                                      # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                                       # DefaultStepDefinitions.I_have_staged(String)
    When I run the command "commit -m Test"                          # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "3 features added"              # DefaultStepDefinitions.the_response_should_contain(String)
    When I modify and add a feature                                  # DefaultStepDefinitions.I_modify_and_add_a_feature()
    And I run the command "reset --path Lines Points"                # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Unstaged changes after reset:" # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain 2 lines                          # DefaultStepDefinitions.the_response_should_contain_x_lines(int)
    When I run the command "status"                                  # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Changes not staged for commit" # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should not contain "Changes to be committed"    # DefaultStepDefinitions.the_response_should_not_contain(String)
Unstaged changes after reset:A	Lines/Lines.1
Commit:  8ab36929bef87c35e1a24cc264d6409b7a957d2aAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:54 -0300Subject: Commit3Commit:  4baf74570502849aba0be83b8e821cde1a9975c5Author:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:53 -0300Subject: Commit2Commit:  5416a1fd04a6b8161ceb2a503ace60db984f2d8aAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:53 -0300Subject: Commit1
Commit:  8ab36929bef87c35e1a24cc264d6409b7a957d2aAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:54 -0300Subject: Commit3Commit:  4baf74570502849aba0be83b8e821cde1a9975c5Author:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:53 -0300Subject: Commit2Commit:  5416a1fd04a6b8161ceb2a503ace60db984f2d8aAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:53 -0300Subject: Commit1
Commit:  8ab36929bef87c35e1a24cc264d6409b7a957d2aAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:54 -0300Subject: Commit3Commit:  4baf74570502849aba0be83b8e821cde1a9975c5Author:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:53 -0300Subject: Commit2Commit:  5416a1fd04a6b8161ceb2a503ace60db984f2d8aAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:05:53 -0300Subject: Commit1
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to do a reset with a mode and paths': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to reset to the state of another branch                         # Reset.feature:138
    Given I have a repository                                                   # DefaultStepDefinitions.I_have_a_repository()
    And I have several branches                                                 # DefaultStepDefinitions.I_have_several_branches()
    When I run the command "checkout branch2"                                   # DefaultStepDefinitions.I_run_the_command_X(String)
    And I run the command "reset branch1"                                       # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Unstaged changes after reset:"            # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain 2 lines                                     # DefaultStepDefinitions.the_response_should_contain_x_lines(int)
    When I run the command "log"                                                # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Subject: Commit1"                         # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Commit2"                          # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Commit3"                          # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain variable "{@ObjectId|localrepo|branch1}"    # DefaultStepDefinitions.checkResponseTextContains(String)
    And the response should not contain "Subject: Commit4"                      # DefaultStepDefinitions.the_response_should_not_contain(String)
    And the response should not contain "Subject: Commit5"                      # DefaultStepDefinitions.the_response_should_not_contain(String)
    And the response should not contain variable "{@ObjectId|localrepo|master}" # DefaultStepDefinitions.checkResponseTextDoesNotContain(String)
100.0
[e1069c4d2e11769242ee678b9d557f1ac82e92e9] TestCommitted, counting objects...3 features added, 0 changed, 0 deleted.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to do a reset with removed feature': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to do a reset with a mode and paths                              # Reset.feature:154
    Given I have a repository                                                    # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                                                  # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                                                  # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                                                   # DefaultStepDefinitions.I_have_staged(String)
    When I run the command "commit -m Test"                                      # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "3 features added"                          # DefaultStepDefinitions.the_response_should_contain(String)
    When I modify and add a feature                                              # DefaultStepDefinitions.I_modify_and_add_a_feature()
    And I run the command "reset --hard --path Lines"                            # DefaultStepDefinitions.I_run_the_command_X(String)
    Then it should answer "Ambiguous call, cannot specify paths and reset mode." # DefaultStepDefinitions.it_should_answer_exactly(String)
    And it should exit with non-zero exit code                                   # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
Unstaged changes after reset:D	Points/Points.1

  Scenario: Try to do a reset with removed feature                  # Reset.feature:166
    Given I have a repository                                       # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                                      # DefaultStepDefinitions.I_have_several_commits()
    And I remove and add a feature                                  # DefaultStepDefinitions.I_remove_and_add_a_feature()
    When I run the command "reset"                                  # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Unstaged changes after reset" # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "revert" command
  In order to undo committed changes
  As a Geogig user
  I want to revert a series of commits and commit those changes
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to revert something while not in a geogig repository': Using URIBuilder DefaultTestRepoURIBuilder
Not in a geogig repository: /opt/public/hipp/ramdisk/geogig/junit3661635835086398757/data
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to revert with nothing specified for reverting': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to revert something while not in a geogig repository # Revert.feature:6
    Given I am in an empty directory                                 # DefaultStepDefinitions.I_am_in_an_empty_directory()
    And I run the command "revert master"                            # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Not in a geogig repository"    # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code                       # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
nothing specified for reverting
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to revert one commit': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to revert with nothing specified for reverting         # Revert.feature:12
    Given I have a repository                                          # DefaultStepDefinitions.I_have_a_repository()
    And I run the command "revert"                                     # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "nothing specified for reverting" # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code                         # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Creating revert state of commit 36d526a226427570f2db683e46188fa50aaef0bb (Commit4)
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Created revert state of 1 features in 3.442 ms
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Staging 1 changes...
[main] INFO org.locationtech.geogig.porcelain.RevertOp - 1 changes staged in 9.226 ms

Commit:  bd10283d8e46f2d07d11aebcc3c1c198652319e8Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:01 +0100Subject: Revert 'Commit4'This reverts 36d526a226427570f2db683e46188fa50aaef0bbCommit:  36d526a226427570f2db683e46188fa50aaef0bbAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:01 -0300Subject: Commit4Commit:  82adf4f60fdcd21ad1cdbfa96d8742c358f0d8e3Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:01 -0300Subject: Commit3Commit:  d55b7aaf5a4e0699cc9406dfab8b634fe2810a89Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:00 -0300Subject: Commit2Commit:  03054b48421cc2422568d69b12c640429a7b5b78Author:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:00 -0300Subject: Commit1
Commit:  bd10283d8e46f2d07d11aebcc3c1c198652319e8Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:01 +0100Subject: Revert 'Commit4'This reverts 36d526a226427570f2db683e46188fa50aaef0bbCommit:  36d526a226427570f2db683e46188fa50aaef0bbAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:01 -0300Subject: Commit4Commit:  82adf4f60fdcd21ad1cdbfa96d8742c358f0d8e3Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:01 -0300Subject: Commit3Commit:  d55b7aaf5a4e0699cc9406dfab8b634fe2810a89Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:00 -0300Subject: Commit2Commit:  03054b48421cc2422568d69b12c640429a7b5b78Author:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:00 -0300Subject: Commit1
Commit:  bd10283d8e46f2d07d11aebcc3c1c198652319e8Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:01 +0100Subject: Revert 'Commit4'This reverts 36d526a226427570f2db683e46188fa50aaef0bbCommit:  36d526a226427570f2db683e46188fa50aaef0bbAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:01 -0300Subject: Commit4Commit:  82adf4f60fdcd21ad1cdbfa96d8742c358f0d8e3Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:01 -0300Subject: Commit3Commit:  d55b7aaf5a4e0699cc9406dfab8b634fe2810a89Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:00 -0300Subject: Commit2Commit:  03054b48421cc2422568d69b12c640429a7b5b78Author:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:00 -0300Subject: Commit1
Commit:  bd10283d8e46f2d07d11aebcc3c1c198652319e8Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:01 +0100Subject: Revert 'Commit4'This reverts 36d526a226427570f2db683e46188fa50aaef0bbCommit:  36d526a226427570f2db683e46188fa50aaef0bbAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:01 -0300Subject: Commit4Commit:  82adf4f60fdcd21ad1cdbfa96d8742c358f0d8e3Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:01 -0300Subject: Commit3Commit:  d55b7aaf5a4e0699cc9406dfab8b634fe2810a89Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:00 -0300Subject: Commit2Commit:  03054b48421cc2422568d69b12c640429a7b5b78Author:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:00 -0300Subject: Commit1
Commit:  bd10283d8e46f2d07d11aebcc3c1c198652319e8Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:01 +0100Subject: Revert 'Commit4'This reverts 36d526a226427570f2db683e46188fa50aaef0bbCommit:  36d526a226427570f2db683e46188fa50aaef0bbAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:01 -0300Subject: Commit4Commit:  82adf4f60fdcd21ad1cdbfa96d8742c358f0d8e3Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:01 -0300Subject: Commit3Commit:  d55b7aaf5a4e0699cc9406dfab8b634fe2810a89Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:00 -0300Subject: Commit2Commit:  03054b48421cc2422568d69b12c640429a7b5b78Author:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:00 -0300Subject: Commit1
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to revert a commit that doesn't exist': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to revert one commit                            # Revert.feature:18
    Given I have a repository                                   # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                                  # DefaultStepDefinitions.I_have_several_commits()
    When I run the command "revert master"                      # DefaultStepDefinitions.I_run_the_command_X(String)
    And I run the command "log"                                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Subject: Commit1"         # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Commit2"          # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Commit3"          # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Commit4"          # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Revert 'Commit4'" # DefaultStepDefinitions.the_response_should_contain(String)
Couldn't resolve 'doesntExist' to a commit, aborting revert.
Commit:  954167824c402b65ccbbebc0389c9ae98e40eb5eAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:03 -0300Subject: Commit4Commit:  b45314bc49fd419b8cbd8cc57c074d48fa6745b0Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:03 -0300Subject: Commit3Commit:  cd64f3efcb993f6aa1b04d9011bd112e5b8299b3Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:02 -0300Subject: Commit2Commit:  ee03d9846ebf76f7ee520673354e3329c56627deAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:02 -0300Subject: Commit1
Commit:  954167824c402b65ccbbebc0389c9ae98e40eb5eAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:03 -0300Subject: Commit4Commit:  b45314bc49fd419b8cbd8cc57c074d48fa6745b0Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:03 -0300Subject: Commit3Commit:  cd64f3efcb993f6aa1b04d9011bd112e5b8299b3Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:02 -0300Subject: Commit2Commit:  ee03d9846ebf76f7ee520673354e3329c56627deAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:02 -0300Subject: Commit1
Commit:  954167824c402b65ccbbebc0389c9ae98e40eb5eAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:03 -0300Subject: Commit4Commit:  b45314bc49fd419b8cbd8cc57c074d48fa6745b0Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:03 -0300Subject: Commit3Commit:  cd64f3efcb993f6aa1b04d9011bd112e5b8299b3Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:02 -0300Subject: Commit2Commit:  ee03d9846ebf76f7ee520673354e3329c56627deAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:02 -0300Subject: Commit1
Commit:  954167824c402b65ccbbebc0389c9ae98e40eb5eAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:03 -0300Subject: Commit4Commit:  b45314bc49fd419b8cbd8cc57c074d48fa6745b0Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:03 -0300Subject: Commit3Commit:  cd64f3efcb993f6aa1b04d9011bd112e5b8299b3Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:02 -0300Subject: Commit2Commit:  ee03d9846ebf76f7ee520673354e3329c56627deAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:02 -0300Subject: Commit1
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to revert multiple commits': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to revert a commit that doesn't exist                                              # Revert.feature:29
    Given I have a repository                                                                      # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                                                                     # DefaultStepDefinitions.I_have_several_commits()
    When I run the command "revert doesntExist"                                                    # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Couldn't resolve 'doesntExist' to a commit, aborting revert" # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code                                                     # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
    When I run the command "log"                                                                   # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Subject: Commit1"                                            # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Commit2"                                             # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Commit3"                                             # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Commit4"                                             # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should not contain "Subject: Revert 'Commit4'"                                # DefaultStepDefinitions.the_response_should_not_contain(String)
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Creating revert state of commit f45f9838fcc8f07e8e42bc6096ef102b4ef81122 (Commit3)
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Created revert state of 2 features in 12.79 ms
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Staging 2 changes...
[main] INFO org.locationtech.geogig.porcelain.RevertOp - 2 changes staged in 14.91 ms

[main] INFO org.locationtech.geogig.porcelain.RevertOp - Creating revert state of commit 6049f3115e5f1224638c646b0339e2d5aaeb202b (Commit2)
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Created revert state of 2 features in 12.84 ms
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Staging 2 changes...
[main] INFO org.locationtech.geogig.porcelain.RevertOp - 2 changes staged in 12.45 ms

Commit:  07c2ce2b695b3a90b05cafe6cf96cd5bb5d9d60fAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:05 +0100Subject: Revert 'Commit2'This reverts 6049f3115e5f1224638c646b0339e2d5aaeb202bCommit:  db18962fd1c1bf30406efd80832056bfc0b2882aAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:05 +0100Subject: Revert 'Commit3'This reverts f45f9838fcc8f07e8e42bc6096ef102b4ef81122Commit:  befa0cc5b3d13353ffeaa46e5c625a89f7981efeAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:05 -0300Subject: Commit4Commit:  f45f9838fcc8f07e8e42bc6096ef102b4ef81122Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:04 -0300Subject: Commit3Commit:  6049f3115e5f1224638c646b0339e2d5aaeb202bAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:04 -0300Subject: Commit2Commit:  d9be0948434776b3571e52faf111d51a4c438cbdAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:04 -0300Subject: Commit1
Commit:  07c2ce2b695b3a90b05cafe6cf96cd5bb5d9d60fAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:05 +0100Subject: Revert 'Commit2'This reverts 6049f3115e5f1224638c646b0339e2d5aaeb202bCommit:  db18962fd1c1bf30406efd80832056bfc0b2882aAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:05 +0100Subject: Revert 'Commit3'This reverts f45f9838fcc8f07e8e42bc6096ef102b4ef81122Commit:  befa0cc5b3d13353ffeaa46e5c625a89f7981efeAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:05 -0300Subject: Commit4Commit:  f45f9838fcc8f07e8e42bc6096ef102b4ef81122Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:04 -0300Subject: Commit3Commit:  6049f3115e5f1224638c646b0339e2d5aaeb202bAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:04 -0300Subject: Commit2Commit:  d9be0948434776b3571e52faf111d51a4c438cbdAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:04 -0300Subject: Commit1
Commit:  07c2ce2b695b3a90b05cafe6cf96cd5bb5d9d60fAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:05 +0100Subject: Revert 'Commit2'This reverts 6049f3115e5f1224638c646b0339e2d5aaeb202bCommit:  db18962fd1c1bf30406efd80832056bfc0b2882aAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:05 +0100Subject: Revert 'Commit3'This reverts f45f9838fcc8f07e8e42bc6096ef102b4ef81122Commit:  befa0cc5b3d13353ffeaa46e5c625a89f7981efeAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:05 -0300Subject: Commit4Commit:  f45f9838fcc8f07e8e42bc6096ef102b4ef81122Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:04 -0300Subject: Commit3Commit:  6049f3115e5f1224638c646b0339e2d5aaeb202bAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:04 -0300Subject: Commit2Commit:  d9be0948434776b3571e52faf111d51a4c438cbdAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:04 -0300Subject: Commit1
Commit:  07c2ce2b695b3a90b05cafe6cf96cd5bb5d9d60fAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:05 +0100Subject: Revert 'Commit2'This reverts 6049f3115e5f1224638c646b0339e2d5aaeb202bCommit:  db18962fd1c1bf30406efd80832056bfc0b2882aAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:05 +0100Subject: Revert 'Commit3'This reverts f45f9838fcc8f07e8e42bc6096ef102b4ef81122Commit:  befa0cc5b3d13353ffeaa46e5c625a89f7981efeAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:05 -0300Subject: Commit4Commit:  f45f9838fcc8f07e8e42bc6096ef102b4ef81122Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:04 -0300Subject: Commit3Commit:  6049f3115e5f1224638c646b0339e2d5aaeb202bAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:04 -0300Subject: Commit2Commit:  d9be0948434776b3571e52faf111d51a4c438cbdAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:04 -0300Subject: Commit1
Commit:  07c2ce2b695b3a90b05cafe6cf96cd5bb5d9d60fAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:05 +0100Subject: Revert 'Commit2'This reverts 6049f3115e5f1224638c646b0339e2d5aaeb202bCommit:  db18962fd1c1bf30406efd80832056bfc0b2882aAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:05 +0100Subject: Revert 'Commit3'This reverts f45f9838fcc8f07e8e42bc6096ef102b4ef81122Commit:  befa0cc5b3d13353ffeaa46e5c625a89f7981efeAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:05 -0300Subject: Commit4Commit:  f45f9838fcc8f07e8e42bc6096ef102b4ef81122Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:04 -0300Subject: Commit3Commit:  6049f3115e5f1224638c646b0339e2d5aaeb202bAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:04 -0300Subject: Commit2Commit:  d9be0948434776b3571e52faf111d51a4c438cbdAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:04 -0300Subject: Commit1
Commit:  07c2ce2b695b3a90b05cafe6cf96cd5bb5d9d60fAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:05 +0100Subject: Revert 'Commit2'This reverts 6049f3115e5f1224638c646b0339e2d5aaeb202bCommit:  db18962fd1c1bf30406efd80832056bfc0b2882aAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:05 +0100Subject: Revert 'Commit3'This reverts f45f9838fcc8f07e8e42bc6096ef102b4ef81122Commit:  befa0cc5b3d13353ffeaa46e5c625a89f7981efeAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:05 -0300Subject: Commit4Commit:  f45f9838fcc8f07e8e42bc6096ef102b4ef81122Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:04 -0300Subject: Commit3Commit:  6049f3115e5f1224638c646b0339e2d5aaeb202bAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:04 -0300Subject: Commit2Commit:  d9be0948434776b3571e52faf111d51a4c438cbdAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:04 -0300Subject: Commit1
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to revert multiple commits but with one nonexistant commit': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to revert multiple commits                      # Revert.feature:42
    Given I have a repository                                   # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                                  # DefaultStepDefinitions.I_have_several_commits()
    When I run the command "revert master~1 master~2"           # DefaultStepDefinitions.I_run_the_command_X(String)
    And I run the command "log"                                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Subject: Commit1"         # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Commit2"          # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Commit3"          # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Commit4"          # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Revert 'Commit2'" # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Revert 'Commit3'" # DefaultStepDefinitions.the_response_should_contain(String)
Couldn't resolve 'blah' to a commit, aborting revert.
Commit:  1b104d32da32507e42052f9fdbf509f6da11cc90Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:07 -0300Subject: Commit4Commit:  f6537dd2fb72cec17e7a5903a1385a348ec4bde5Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:06 -0300Subject: Commit3Commit:  6a9904be9edbd89ed88a38a0e65235f98cd85135Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:06 -0300Subject: Commit2Commit:  87d2f76f98c9cadf61fc16327aa147c3d75b654aAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:06 -0300Subject: Commit1
Commit:  1b104d32da32507e42052f9fdbf509f6da11cc90Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:07 -0300Subject: Commit4Commit:  f6537dd2fb72cec17e7a5903a1385a348ec4bde5Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:06 -0300Subject: Commit3Commit:  6a9904be9edbd89ed88a38a0e65235f98cd85135Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:06 -0300Subject: Commit2Commit:  87d2f76f98c9cadf61fc16327aa147c3d75b654aAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:06 -0300Subject: Commit1
Commit:  1b104d32da32507e42052f9fdbf509f6da11cc90Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:07 -0300Subject: Commit4Commit:  f6537dd2fb72cec17e7a5903a1385a348ec4bde5Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:06 -0300Subject: Commit3Commit:  6a9904be9edbd89ed88a38a0e65235f98cd85135Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:06 -0300Subject: Commit2Commit:  87d2f76f98c9cadf61fc16327aa147c3d75b654aAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:06 -0300Subject: Commit1
Commit:  1b104d32da32507e42052f9fdbf509f6da11cc90Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:07 -0300Subject: Commit4Commit:  f6537dd2fb72cec17e7a5903a1385a348ec4bde5Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:06 -0300Subject: Commit3Commit:  6a9904be9edbd89ed88a38a0e65235f98cd85135Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:06 -0300Subject: Commit2Commit:  87d2f76f98c9cadf61fc16327aa147c3d75b654aAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:06 -0300Subject: Commit1
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to revert with conflict and abort': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to revert multiple commits but with one nonexistant commit                  # Revert.feature:54
    Given I have a repository                                                               # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                                                              # DefaultStepDefinitions.I_have_several_commits()
    When I run the command "revert master~1 blah"                                           # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Couldn't resolve 'blah' to a commit, aborting revert" # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code                                              # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
    When I run the command "log"                                                            # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Subject: Commit1"                                     # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Commit2"                                      # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Commit3"                                      # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Subject: Commit4"                                      # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should not contain "Subject: Revert of commit"                         # DefaultStepDefinitions.the_response_should_not_contain(String)
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Creating revert state of commit 0300dc3ab45fdf2bd71e28bae0d4c48ca1b539c3 (Commit1)
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Created revert state of 2 features in 13.99 ms
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Staging 1 changes...
[main] INFO org.locationtech.geogig.porcelain.RevertOp - 1 changes staged in 10.15 ms

error: could not apply 0300dc3a Commit1CONFLICT: conflict in Points/Points.1When you have fixed these conflicts, run 'geogig revert --continue' to continue the revert operation.To abort the revert operation, run 'geogig revert --abort'
error: could not apply 0300dc3a Commit1CONFLICT: conflict in Points/Points.1When you have fixed these conflicts, run 'geogig revert --continue' to continue the revert operation.To abort the revert operation, run 'geogig revert --abort'
Revert aborted successfully.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to revert without commiting': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to revert with conflict and abort                           # Revert.feature:68
    Given I have a repository                                               # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                                              # DefaultStepDefinitions.I_have_several_commits()
    When I run the command "revert HEAD~3"                                  # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "could not apply"                      # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "CONFLICT: conflict in Points/Points.1" # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code                              # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
    When I run the command "revert --abort"                                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "aborted"                              # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Creating revert state of commit 56ac2a1cdecca84e4e5ff2d4c5b7055df0067b22 (Commit4)
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Created revert state of 1 features in 1.974 ms
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Staging 1 changes...
[main] INFO org.locationtech.geogig.porcelain.RevertOp - 1 changes staged in 9.518 ms

[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to revert with conflict and continue': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to revert without commiting           # Revert.feature:78
    Given I have a repository                         # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                        # DefaultStepDefinitions.I_have_several_commits()
    And I run the command "revert master --no-commit" # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "log"                      # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should not contain "Revert"     # DefaultStepDefinitions.the_response_should_not_contain(String)
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Creating revert state of commit 9480dab4afe242b49b230a1a2668a76027b7c01f (Commit1)
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Created revert state of 2 features in 2.819 ms
[main] INFO org.locationtech.geogig.porcelain.RevertOp - Staging 1 changes...
[main] INFO org.locationtech.geogig.porcelain.RevertOp - 1 changes staged in 8.842 ms

error: could not apply 9480dab4 Commit1CONFLICT: conflict in Points/Points.1When you have fixed these conflicts, run 'geogig revert --continue' to continue the revert operation.To abort the revert operation, run 'geogig revert --abort'
Commit:  3e6a9a592bda2cade92d1afa9fd5c0920b22c721Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-10-01 01:06:14 +0100Subject: Revert 'Commit1'This reverts 9480dab4afe242b49b230a1a2668a76027b7c01fCommit:  fd2c0639b7b6eb7085cd97d45747270a3157acc8Author:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:13 -0300Subject: Commit4Commit:  ac9fa842ef1f2217cbe5591d4b7f43ec7a01be9fAuthor:  John Doe <JohnDoe@example.com>Date:    (just now) 2018-09-30 21:06:13 -0300Subject: Commit3Commit:  b715b433c1f3e80a4711c4ff1760f06dd74973a6Author:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:13 -0300Subject: Commit2Commit:  9480dab4afe242b49b230a1a2668a76027b7c01fAuthor:  John Doe <JohnDoe@example.com>Date:    (1 seconds ago) 2018-09-30 21:06:12 -0300Subject: Commit1

  Scenario: Try to revert with conflict and continue   # Revert.feature:85
    Given I have a repository                          # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                         # DefaultStepDefinitions.I_have_several_commits()
    When I run the command "revert HEAD~3"             # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "could not apply" # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code         # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
    When I have staged "points1"                       # DefaultStepDefinitions.I_have_staged(String)
    When I run the command "revert --continue"         # DefaultStepDefinitions.I_run_the_command_X(String)
    And I run the command "log"                        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Revert"          # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "show" command
    In order to know about a given element
    As a Geogig User
    I want to display information about it
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to show the description of a feature using only its path': Using URIBuilder DefaultTestRepoURIBuilder
ID:  a47ca38e5c3e92c94dec9e8ea597c642003ec878FEATURE TYPE ID:  10b5dc054390266e0cc7b59ef34f543441f071e0ATTRIBUTES  ----------  sp: StringProp1_1ip: 1000pp: POINT (1 1)
ID:  a47ca38e5c3e92c94dec9e8ea597c642003ec878FEATURE TYPE ID:  10b5dc054390266e0cc7b59ef34f543441f071e0ATTRIBUTES  ----------  sp: StringProp1_1ip: 1000pp: POINT (1 1)
ID:  a47ca38e5c3e92c94dec9e8ea597c642003ec878FEATURE TYPE ID:  10b5dc054390266e0cc7b59ef34f543441f071e0ATTRIBUTES  ----------  sp: StringProp1_1ip: 1000pp: POINT (1 1)
ID:  a47ca38e5c3e92c94dec9e8ea597c642003ec878FEATURE TYPE ID:  10b5dc054390266e0cc7b59ef34f543441f071e0ATTRIBUTES  ----------  sp: StringProp1_1ip: 1000pp: POINT (1 1)
ID:  a47ca38e5c3e92c94dec9e8ea597c642003ec878FEATURE TYPE ID:  10b5dc054390266e0cc7b59ef34f543441f071e0ATTRIBUTES  ----------  sp: StringProp1_1ip: 1000pp: POINT (1 1)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to show the description of a commit': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to show the description of a feature using only its path                  # Show.feature:6
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    And I run the command "commit -m TestCommit"                                          # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "show Points/Points.1"                                         # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "ATTRIBUTES"                                         # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "FEATURE TYPE ID"                                     # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "sp"                                                  # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "pp"                                                  # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "ip"                                                  # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain variable "{@ObjectId|localrepo|HEAD:Points/Points.1}" # DefaultStepDefinitions.checkResponseTextContains(String)
    And the response should contain variable "{@PointsTypeID}"                            # DefaultStepDefinitions.checkResponseTextContains(String)
Commit:        1b5aababad72502e846977dcfdf845bced838968Author:        John Doe <JohnDoe@example.com>Committer:     John Doe <JohnDoe@example.com>Author date:   (just now) Sun Sep 30 20:06:18 EDT 2018Committer date:(just now) Sun Sep 30 20:06:18 EDT 2018Subject:       TestCommit
Commit:        1b5aababad72502e846977dcfdf845bced838968Author:        John Doe <JohnDoe@example.com>Committer:     John Doe <JohnDoe@example.com>Author date:   (just now) Sun Sep 30 20:06:18 EDT 2018Committer date:(just now) Sun Sep 30 20:06:18 EDT 2018Subject:       TestCommit
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to show the description of a tree': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to show the description of a commit                       # Show.feature:19
    Given I have a repository                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                # DefaultStepDefinitions.I_stage_6_features()
    And I run the command "commit -m TestCommit"                          # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "show HEAD"                                    # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Commit"                             # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Author"                              # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain variable "{@ObjectId|localrepo|HEAD}" # DefaultStepDefinitions.checkResponseTextContains(String)
TREE ID:  99dfd3607e82eb0f85baa185c60da9da9d8858d9SIZE:  3NUMBER Of SUBTREES:  0DEFAULT FEATURE TYPE ID:  10b5dc054390266e0cc7b59ef34f543441f071e0DEFAULT FEATURE TYPE ATTRIBUTESsp: <STRING>ip: <INTEGER>pp: <POINT>
TREE ID:  99dfd3607e82eb0f85baa185c60da9da9d8858d9SIZE:  3NUMBER Of SUBTREES:  0DEFAULT FEATURE TYPE ID:  10b5dc054390266e0cc7b59ef34f543441f071e0DEFAULT FEATURE TYPE ATTRIBUTESsp: <STRING>ip: <INTEGER>pp: <POINT>
TREE ID:  99dfd3607e82eb0f85baa185c60da9da9d8858d9SIZE:  3NUMBER Of SUBTREES:  0DEFAULT FEATURE TYPE ID:  10b5dc054390266e0cc7b59ef34f543441f071e0DEFAULT FEATURE TYPE ATTRIBUTESsp: <STRING>ip: <INTEGER>pp: <POINT>
TREE ID:  99dfd3607e82eb0f85baa185c60da9da9d8858d9SIZE:  3NUMBER Of SUBTREES:  0DEFAULT FEATURE TYPE ID:  10b5dc054390266e0cc7b59ef34f543441f071e0DEFAULT FEATURE TYPE ATTRIBUTESsp: <STRING>ip: <INTEGER>pp: <POINT>
TREE ID:  99dfd3607e82eb0f85baa185c60da9da9d8858d9SIZE:  3NUMBER Of SUBTREES:  0DEFAULT FEATURE TYPE ID:  10b5dc054390266e0cc7b59ef34f543441f071e0DEFAULT FEATURE TYPE ATTRIBUTESsp: <STRING>ip: <INTEGER>pp: <POINT>
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to show the description of a feature': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to show the description of a tree                                # Show.feature:28
    Given I have a repository                                                    # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                       # DefaultStepDefinitions.I_stage_6_features()
    And I run the command "commit -m TestCommit"                                 # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "show HEAD:Points"                                    # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "TREE ID"                                   # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "DEFAULT FEATURE TYPE ATTRIBUTES"            # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "sp"                                         # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "pp"                                         # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "ip"                                         # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain variable "{@ObjectId|localrepo|HEAD:Points}" # DefaultStepDefinitions.checkResponseTextContains(String)
    And the response should contain variable "{@PointsTypeID}"                   # DefaultStepDefinitions.checkResponseTextContains(String)
ID:  a47ca38e5c3e92c94dec9e8ea597c642003ec878FEATURE TYPE ID:  10b5dc054390266e0cc7b59ef34f543441f071e0ATTRIBUTES  ----------  sp: StringProp1_1ip: 1000pp: POINT (1 1)
ID:  a47ca38e5c3e92c94dec9e8ea597c642003ec878FEATURE TYPE ID:  10b5dc054390266e0cc7b59ef34f543441f071e0ATTRIBUTES  ----------  sp: StringProp1_1ip: 1000pp: POINT (1 1)
ID:  a47ca38e5c3e92c94dec9e8ea597c642003ec878FEATURE TYPE ID:  10b5dc054390266e0cc7b59ef34f543441f071e0ATTRIBUTES  ----------  sp: StringProp1_1ip: 1000pp: POINT (1 1)
ID:  a47ca38e5c3e92c94dec9e8ea597c642003ec878FEATURE TYPE ID:  10b5dc054390266e0cc7b59ef34f543441f071e0ATTRIBUTES  ----------  sp: StringProp1_1ip: 1000pp: POINT (1 1)
ID:  a47ca38e5c3e92c94dec9e8ea597c642003ec878FEATURE TYPE ID:  10b5dc054390266e0cc7b59ef34f543441f071e0ATTRIBUTES  ----------  sp: StringProp1_1ip: 1000pp: POINT (1 1)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to show the description of a feature using its SHA-1': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to show the description of a feature                                      # Show.feature:41
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    And I run the command "commit -m TestCommit"                                          # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "show HEAD:Points/Points.1"                                    # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "ATTRIBUTES"                                         # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "FEATURE TYPE ID"                                     # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "sp"                                                  # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "pp"                                                  # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "ip"                                                  # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain variable "{@ObjectId|localrepo|HEAD:Points/Points.1}" # DefaultStepDefinitions.checkResponseTextContains(String)
    And the response should contain variable "{@PointsTypeID}"                            # DefaultStepDefinitions.checkResponseTextContains(String)
id	a47ca38e5c3e92c94dec9e8ea597c642003ec878FEATURESTRING	StringProp1_1INTEGER	1000POINT	POINT (1 1)
id	a47ca38e5c3e92c94dec9e8ea597c642003ec878FEATURESTRING	StringProp1_1INTEGER	1000POINT	POINT (1 1)
id	a47ca38e5c3e92c94dec9e8ea597c642003ec878FEATURESTRING	StringProp1_1INTEGER	1000POINT	POINT (1 1)
id	a47ca38e5c3e92c94dec9e8ea597c642003ec878FEATURESTRING	StringProp1_1INTEGER	1000POINT	POINT (1 1)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to show the description of a feature with the --raw modifier': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to show the description of a feature using its SHA-1                                          # Show.feature:54
    Given I have a repository                                                                                 # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                                    # DefaultStepDefinitions.I_stage_6_features()
    And I run the command "commit -m TestCommit"                                                              # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "show a47ca38e5c3e92c94dec9e8ea597c642003ec878"                                    # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "FEATURE"                                                                # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "STRING"                                                                  # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "INTEGER"                                                                 # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "POINT"                                                                   # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain variable "{@ObjectId|localrepo|a47ca38e5c3e92c94dec9e8ea597c642003ec878}" # DefaultStepDefinitions.checkResponseTextContains(String)
HEAD:Points/Points.1a47ca38e5c3e92c94dec9e8ea597c642003ec878spSTRINGStringProp1_1ipINTEGER1000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (1 1)
HEAD:Points/Points.1a47ca38e5c3e92c94dec9e8ea597c642003ec878spSTRINGStringProp1_1ipINTEGER1000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (1 1)
HEAD:Points/Points.1a47ca38e5c3e92c94dec9e8ea597c642003ec878spSTRINGStringProp1_1ipINTEGER1000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (1 1)
HEAD:Points/Points.1a47ca38e5c3e92c94dec9e8ea597c642003ec878spSTRINGStringProp1_1ipINTEGER1000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (1 1)
HEAD:Points/Points.1a47ca38e5c3e92c94dec9e8ea597c642003ec878spSTRINGStringProp1_1ipINTEGER1000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (1 1)
HEAD:Points/Points.1a47ca38e5c3e92c94dec9e8ea597c642003ec878spSTRINGStringProp1_1ipINTEGER1000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (1 1)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to show the description of a 2 features with the --raw modifier': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to show the description of a feature with the --raw modifier              # Show.feature:65
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    And I run the command "commit -m TestCommit"                                          # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "show HEAD:Points/Points.1 --raw"                              # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "STRING"                                             # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "INTEGER"                                             # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "POINT urn:ogc:def:crs:EPSG::4326"                    # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "sp"                                                  # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "pp"                                                  # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "ip"                                                  # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain variable "{@ObjectId|localrepo|HEAD:Points/Points.1}" # DefaultStepDefinitions.checkResponseTextContains(String)
HEAD:Points/Points.1a47ca38e5c3e92c94dec9e8ea597c642003ec878spSTRINGStringProp1_1ipINTEGER1000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (1 1)HEAD:Points/Points.20d0cdfa256daf663172f01a0a0d06a9ecf69e113spSTRINGStringProp1_2ipINTEGER2000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (2 2)
HEAD:Points/Points.1a47ca38e5c3e92c94dec9e8ea597c642003ec878spSTRINGStringProp1_1ipINTEGER1000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (1 1)HEAD:Points/Points.20d0cdfa256daf663172f01a0a0d06a9ecf69e113spSTRINGStringProp1_2ipINTEGER2000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (2 2)
HEAD:Points/Points.1a47ca38e5c3e92c94dec9e8ea597c642003ec878spSTRINGStringProp1_1ipINTEGER1000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (1 1)HEAD:Points/Points.20d0cdfa256daf663172f01a0a0d06a9ecf69e113spSTRINGStringProp1_2ipINTEGER2000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (2 2)
HEAD:Points/Points.1a47ca38e5c3e92c94dec9e8ea597c642003ec878spSTRINGStringProp1_1ipINTEGER1000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (1 1)HEAD:Points/Points.20d0cdfa256daf663172f01a0a0d06a9ecf69e113spSTRINGStringProp1_2ipINTEGER2000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (2 2)
HEAD:Points/Points.1a47ca38e5c3e92c94dec9e8ea597c642003ec878spSTRINGStringProp1_1ipINTEGER1000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (1 1)HEAD:Points/Points.20d0cdfa256daf663172f01a0a0d06a9ecf69e113spSTRINGStringProp1_2ipINTEGER2000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (2 2)
HEAD:Points/Points.1a47ca38e5c3e92c94dec9e8ea597c642003ec878spSTRINGStringProp1_1ipINTEGER1000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (1 1)HEAD:Points/Points.20d0cdfa256daf663172f01a0a0d06a9ecf69e113spSTRINGStringProp1_2ipINTEGER2000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (2 2)
HEAD:Points/Points.1a47ca38e5c3e92c94dec9e8ea597c642003ec878spSTRINGStringProp1_1ipINTEGER1000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (1 1)HEAD:Points/Points.20d0cdfa256daf663172f01a0a0d06a9ecf69e113spSTRINGStringProp1_2ipINTEGER2000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (2 2)
HEAD:Points/Points.1a47ca38e5c3e92c94dec9e8ea597c642003ec878spSTRINGStringProp1_1ipINTEGER1000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (1 1)HEAD:Points/Points.20d0cdfa256daf663172f01a0a0d06a9ecf69e113spSTRINGStringProp1_2ipINTEGER2000ppPOINT urn:ogc:def:crs:EPSG::4326POINT (2 2)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to show the description of a featuretype': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to show the description of a 2 features with the --raw modifier           # Show.feature:78
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    And I run the command "commit -m TestCommit"                                          # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "show HEAD:Points/Points.1 HEAD:Points/Points.2 --raw"         # DefaultStepDefinitions.I_run_the_command_X(String)
    And the response should contain "HEAD:Points/Points.1"                                # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "HEAD:Points/Points.2"                                # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "STRING"                                              # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "INTEGER"                                             # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "POINT"                                               # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "sp"                                                  # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "pp"                                                  # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "ip"                                                  # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain variable "{@ObjectId|localrepo|HEAD:Points/Points.1}" # DefaultStepDefinitions.checkResponseTextContains(String)
TREE ID:  99dfd3607e82eb0f85baa185c60da9da9d8858d9SIZE:  3NUMBER Of SUBTREES:  0DEFAULT FEATURE TYPE ID:  10b5dc054390266e0cc7b59ef34f543441f071e0DEFAULT FEATURE TYPE ATTRIBUTESsp: <STRING>ip: <INTEGER>pp: <POINT>

  Scenario: Try to show the description of a featuretype # Show.feature:93
    Given I have a repository                            # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                               # DefaultStepDefinitions.I_stage_6_features()
    And I run the command "commit -m TestCommit"         # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "show Points"                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "TREE ID"           # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "squash" command
    In order to modify history of the repository
    As a Geogig User
    I want to squash commits
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Squash commits': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Squash commits with message': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Squash commits                                                # Squash.feature:6
    Given I have a repository                                             # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                                            # DefaultStepDefinitions.I_have_several_commits()
    When I run the command "squash HEAD~2 HEAD"                           # DefaultStepDefinitions.I_run_the_command_X(String)
    And I run the command "log --oneline"                                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain 2 lines                              # DefaultStepDefinitions.the_response_should_contain_x_lines(int)
    And the response should contain variable "{@ObjectId|localrepo|HEAD}" # DefaultStepDefinitions.checkResponseTextContains(String)
796b86f6a1b262cce9c771b6237d8f671be16cb5 squashedc18dadb25b0f00afe5126c4337b7a0022faaefe6 Commit1
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Squash commits in wrong order': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Squash commits with message                                   # Squash.feature:14
    Given I have a repository                                             # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                                            # DefaultStepDefinitions.I_have_several_commits()
    When I run the command "squash HEAD~2 HEAD -m squashed"               # DefaultStepDefinitions.I_run_the_command_X(String)
    And I run the command "log --oneline"                                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain 2 lines                              # DefaultStepDefinitions.the_response_should_contain_x_lines(int)
    And the response should contain "squashed"                            # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain variable "{@ObjectId|localrepo|HEAD}" # DefaultStepDefinitions.checkResponseTextContains(String)
Commits provided in wrong order
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Squash commits with only one commit provided': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Squash commits in wrong order          # Squash.feature:23
    Given I have a repository                      # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                     # DefaultStepDefinitions.I_have_several_commits()
    When I run the command "squash HEAD HEAD~2"    # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "wrong order" # DefaultStepDefinitions.the_response_should_contain(String)
2 commit references must be supplied

  Scenario: Squash commits with only one commit provided                    # Squash.feature:29
    Given I have a repository                                               # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                                              # DefaultStepDefinitions.I_have_several_commits()
    When I run the command "squash HEAD~2"                                  # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "2 commit references must be supplied" # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "status" command
    In order to know what I have staged and unstaged
    As a Geogig User
    I want to check the status of the current repository
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to get the status of an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to get the status of a repository with no changes': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to get the status of an empty directory              # Status.feature:6
    Given I am in an empty directory                                 # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "status"                                  # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should start with "Not in a geogig repository" # DefaultStepDefinitions.the_response_should_start_with(String)
    And it should exit with non-zero exit code                       # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
# On branch masternothing to commit (working directory clean)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to get the status of a repository with unstaged changes without using a limit': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to get the status of a repository with no changes # Status.feature:12
    Given I have a repository                                     # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "status"                               # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "nothing to commit"          # DefaultStepDefinitions.the_response_should_contain(String)
# On branch master# Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      added  Points#      added  Points/Points.2#      added  Points/Points.3#      added  Points/Points.1#      added  Lines#      added  Lines/Lines.1#      added  Lines/Lines.2#      added  Lines/Lines.3# 8 total.
# On branch master# Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      added  Points#      added  Points/Points.2#      added  Points/Points.3#      added  Points/Points.1#      added  Lines#      added  Lines/Lines.1#      added  Lines/Lines.2#      added  Lines/Lines.3# 8 total.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to get the status of a repository with staged changes without using a limit': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to get the status of a repository with unstaged changes without using a limit # Status.feature:17
    Given I have a repository                                                                 # DefaultStepDefinitions.I_have_a_repository()
    And I have unstaged "points1"                                                             # DefaultStepDefinitions.I_have_unstaged(String)
    And I have unstaged "points2"                                                             # DefaultStepDefinitions.I_have_unstaged(String)
    And I have unstaged "points3"                                                             # DefaultStepDefinitions.I_have_unstaged(String)
    And I have unstaged "lines1"                                                              # DefaultStepDefinitions.I_have_unstaged(String)
    And I have unstaged "lines2"                                                              # DefaultStepDefinitions.I_have_unstaged(String)
    And I have unstaged "lines3"                                                              # DefaultStepDefinitions.I_have_unstaged(String)
    When I run the command "status"                                                           # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Changes not staged for commit"                          # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "8 total."                                                # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should not contain "Changes to be committed"                             # DefaultStepDefinitions.the_response_should_not_contain(String)
    And the response should contain 14 lines                                                  # DefaultStepDefinitions.the_response_should_contain_x_lines(int)
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      added  Points#      added  Lines#      added  Points/Points.2#      added  Points/Points.3#      added  Points/Points.1#      added  Lines/Lines.1#      added  Lines/Lines.2#      added  Lines/Lines.3# 8 total.#
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      added  Points#      added  Lines#      added  Points/Points.2#      added  Points/Points.3#      added  Points/Points.1#      added  Lines/Lines.1#      added  Lines/Lines.2#      added  Lines/Lines.3# 8 total.#
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to get the status of a repository with staged and unstaged changes without using a limit': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to get the status of a repository with staged changes without using a limit # Status.feature:31
    Given I have a repository                                                               # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                                                             # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                                                             # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points3"                                                             # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                                                              # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines2"                                                              # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines3"                                                              # DefaultStepDefinitions.I_have_staged(String)
    When I run the command "status"                                                         # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Changes to be committed"                              # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "8 total."                                              # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should not contain "Changes not staged for commit"                     # DefaultStepDefinitions.the_response_should_not_contain(String)
    And the response should contain 14 lines                                                # DefaultStepDefinitions.the_response_should_contain_x_lines(int)
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      added  Points#      added  Lines#      added  Lines/Lines.1#      added  Lines/Lines.2#      added  Lines/Lines.3#      added  Points/Points.2#      added  Points/Points.3#      added  Points/Points.1# 8 total.## Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      modified  Points#      modified  Points/Points.1# 2 total.
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      added  Points#      added  Lines#      added  Lines/Lines.1#      added  Lines/Lines.2#      added  Lines/Lines.3#      added  Points/Points.2#      added  Points/Points.3#      added  Points/Points.1# 8 total.## Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      modified  Points#      modified  Points/Points.1# 2 total.
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      added  Points#      added  Lines#      added  Lines/Lines.1#      added  Lines/Lines.2#      added  Lines/Lines.3#      added  Points/Points.2#      added  Points/Points.3#      added  Points/Points.1# 8 total.## Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      modified  Points#      modified  Points/Points.1# 2 total.
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      added  Points#      added  Lines#      added  Lines/Lines.1#      added  Lines/Lines.2#      added  Lines/Lines.3#      added  Points/Points.2#      added  Points/Points.3#      added  Points/Points.1# 8 total.## Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      modified  Points#      modified  Points/Points.1# 2 total.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to get the status of a repository with unstaged changes specifying all': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to get the status of a repository with staged and unstaged changes without using a limit # Status.feature:45
    Given I have a repository                                                                            # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                                                                          # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                                                                          # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points3"                                                                          # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                                                                           # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines2"                                                                           # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines3"                                                                           # DefaultStepDefinitions.I_have_staged(String)
    And I modify a feature                                                                               # DefaultStepDefinitions.I_modify_a_feature()
    When I run the command "status"                                                                      # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Changes to be committed"                                           # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "8 total."                                                           # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Changes not staged for commit"                                      # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "2 total."                                                           # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain 21 lines                                                             # DefaultStepDefinitions.the_response_should_contain_x_lines(int)
# On branch master# Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      added  Points#      added  Lines#      added  Points/Points.2#      added  Points/Points.3#      added  Points/Points.1#      added  Lines/Lines.1#      added  Lines/Lines.2#      added  Lines/Lines.3# 8 total.
# On branch master# Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      added  Points#      added  Lines#      added  Points/Points.2#      added  Points/Points.3#      added  Points/Points.1#      added  Lines/Lines.1#      added  Lines/Lines.2#      added  Lines/Lines.3# 8 total.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to get the status of a repository with staged changes specifying all': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to get the status of a repository with unstaged changes specifying all # Status.feature:61
    Given I have a repository                                                          # DefaultStepDefinitions.I_have_a_repository()
    And I have unstaged "points1"                                                      # DefaultStepDefinitions.I_have_unstaged(String)
    And I have unstaged "points2"                                                      # DefaultStepDefinitions.I_have_unstaged(String)
    And I have unstaged "points3"                                                      # DefaultStepDefinitions.I_have_unstaged(String)
    And I have unstaged "lines1"                                                       # DefaultStepDefinitions.I_have_unstaged(String)
    And I have unstaged "lines2"                                                       # DefaultStepDefinitions.I_have_unstaged(String)
    And I have unstaged "lines3"                                                       # DefaultStepDefinitions.I_have_unstaged(String)
    When I run the command "status --all"                                              # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Changes not staged for commit"                   # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "8 total."                                         # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should not contain "Changes to be committed"                      # DefaultStepDefinitions.the_response_should_not_contain(String)
    And the response should contain 14 lines                                           # DefaultStepDefinitions.the_response_should_contain_x_lines(int)
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      added  Points#      added  Lines#      added  Points/Points.2#      added  Points/Points.3#      added  Points/Points.1#      added  Lines/Lines.1#      added  Lines/Lines.2#      added  Lines/Lines.3# 8 total.#
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      added  Points#      added  Lines#      added  Points/Points.2#      added  Points/Points.3#      added  Points/Points.1#      added  Lines/Lines.1#      added  Lines/Lines.2#      added  Lines/Lines.3# 8 total.#
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to get the status of a repository with staged and unstaged changes specifying all': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to get the status of a repository with staged changes specifying all # Status.feature:75
    Given I have a repository                                                        # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                                                      # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                                                      # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points3"                                                      # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                                                       # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines2"                                                       # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines3"                                                       # DefaultStepDefinitions.I_have_staged(String)
    When I run the command "status --all"                                            # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Changes to be committed"                       # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "8 total."                                       # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should not contain "Changes not staged for commit"              # DefaultStepDefinitions.the_response_should_not_contain(String)
    And the response should contain 14 lines                                         # DefaultStepDefinitions.the_response_should_contain_x_lines(int)
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      added  Points#      added  Lines#      added  Points/Points.2#      added  Points/Points.3#      added  Points/Points.1#      added  Lines/Lines.1#      added  Lines/Lines.2#      added  Lines/Lines.3# 8 total.## Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      modified  Points#      modified  Points/Points.1# 2 total.
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      added  Points#      added  Lines#      added  Points/Points.2#      added  Points/Points.3#      added  Points/Points.1#      added  Lines/Lines.1#      added  Lines/Lines.2#      added  Lines/Lines.3# 8 total.## Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      modified  Points#      modified  Points/Points.1# 2 total.
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      added  Points#      added  Lines#      added  Points/Points.2#      added  Points/Points.3#      added  Points/Points.1#      added  Lines/Lines.1#      added  Lines/Lines.2#      added  Lines/Lines.3# 8 total.## Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      modified  Points#      modified  Points/Points.1# 2 total.
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      added  Points#      added  Lines#      added  Points/Points.2#      added  Points/Points.3#      added  Points/Points.1#      added  Lines/Lines.1#      added  Lines/Lines.2#      added  Lines/Lines.3# 8 total.## Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      modified  Points#      modified  Points/Points.1# 2 total.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to get the status of a repository with unstaged changes using a limit': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to get the status of a repository with staged and unstaged changes specifying all # Status.feature:89
    Given I have a repository                                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                                                                   # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                                                                   # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points3"                                                                   # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                                                                    # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines2"                                                                    # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines3"                                                                    # DefaultStepDefinitions.I_have_staged(String)
    And I modify a feature                                                                        # DefaultStepDefinitions.I_modify_a_feature()
    When I run the command "status --all"                                                         # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Changes to be committed"                                    # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "8 total."                                                    # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Changes not staged for commit"                               # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "2 total."                                                    # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain 21 lines                                                      # DefaultStepDefinitions.the_response_should_contain_x_lines(int)
# On branch master# Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      added  Points#      added  Lines#      added  Points/Points.2# 8 total.
# On branch master# Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory##      added  Points#      added  Lines#      added  Points/Points.2# 8 total.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to get the status of a repository with staged changes using a limit': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to get the status of a repository with unstaged changes using a limit # Status.feature:105
    Given I have a repository                                                         # DefaultStepDefinitions.I_have_a_repository()
    And I have unstaged "points1"                                                     # DefaultStepDefinitions.I_have_unstaged(String)
    And I have unstaged "points2"                                                     # DefaultStepDefinitions.I_have_unstaged(String)
    And I have unstaged "points3"                                                     # DefaultStepDefinitions.I_have_unstaged(String)
    And I have unstaged "lines1"                                                      # DefaultStepDefinitions.I_have_unstaged(String)
    And I have unstaged "lines2"                                                      # DefaultStepDefinitions.I_have_unstaged(String)
    And I have unstaged "lines3"                                                      # DefaultStepDefinitions.I_have_unstaged(String)
    When I run the command "status --limit 3"                                         # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Changes not staged for commit"                  # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "8 total."                                        # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain 9 lines                                           # DefaultStepDefinitions.the_response_should_contain_x_lines(int)
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      added  Points#      added  Lines#      added  Points/Points.2# 8 total.#
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      added  Points#      added  Lines#      added  Points/Points.2# 8 total.#
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to get the status of a repository with staged and unstaged changes using a limit': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to get the status of a repository with staged changes using a limit # Status.feature:118
    Given I have a repository                                                       # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                                                     # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                                                     # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points3"                                                     # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                                                      # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines2"                                                      # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines3"                                                      # DefaultStepDefinitions.I_have_staged(String)
    When I run the command "status --limit 3"                                       # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Changes to be committed"                      # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "8 total."                                      # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain 9 lines                                         # DefaultStepDefinitions.the_response_should_contain_x_lines(int)
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)## 8 total.## Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory## 2 total.
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)## 8 total.## Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory## 2 total.
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)## 8 total.## Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory## 2 total.
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)## 8 total.## Changes not staged for commit:#   (use "geogig add <path/to/fid>..." to update what will be committed#   (use "geogig checkout -- <path/to/fid>..." to discard changes in working directory## 2 total.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to get the status of a repository with a negative limit': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to get the status of a repository with staged and unstaged changes using a limit # Status.feature:131
    Given I have a repository                                                                    # DefaultStepDefinitions.I_have_a_repository()
    And I have staged "points1"                                                                  # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points2"                                                                  # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "points3"                                                                  # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines1"                                                                   # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines2"                                                                   # DefaultStepDefinitions.I_have_staged(String)
    And I have staged "lines3"                                                                   # DefaultStepDefinitions.I_have_staged(String)
    And I modify a feature                                                                       # DefaultStepDefinitions.I_modify_a_feature()
    When I run the command "status --limit 0"                                                    # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Changes to be committed"                                   # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "8 total."                                                   # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Changes not staged for commit"                              # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "2 total."                                                   # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain 11 lines                                                     # DefaultStepDefinitions.the_response_should_contain_x_lines(int)
Limit must be 0 or greater.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try the get the status of a repository with unmerged elements': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to get the status of a repository with a negative limit # Status.feature:147
    Given I have a repository                                           # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "status --limit -2"                          # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Limit must be 0 or greater"       # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code                          # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
# On branch master# Changes to be committed:#   (use "geogig reset HEAD <path/to/fid>..." to unstage)##      modified  Points#      added  Points/Points.2# 2 total.## Unmerged paths:#   (use "geogig add/rm <path/to/fid>..." as appropriate to mark resolution##      unmerged  Points/Points.1# 1 total.

  Scenario: Try the get the status of a repository with unmerged elements # Status.feature:153
    Given I have a repository                                             # DefaultStepDefinitions.I_have_a_repository()
    And I have a merge conflict state                                     # DefaultStepDefinitions.I_have_a_merge_conflict_state()
    When I run the command "status"                                       # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "unmerged  Points/Points.1"          # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "tag" command
  In order to store defined versions of my repository
  As a Geogig User
  I want to be create tags
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'List the available tags': Using URIBuilder DefaultTestRepoURIBuilder
mytag
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Create a new tag': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: List the available tags          # Tag.feature:6
    Given I have a repository                # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits               # DefaultStepDefinitions.I_have_several_commits()
    And I run the command "tag mytag -m msg" # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "tag"             # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "mytag" # DefaultStepDefinitions.the_response_should_contain(String)
Created tag mytag -> 7fd854a928ddc0068489e5e3377744c5d7ffc3fd
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Create a new tag for a given commit': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Create a new tag                                              # Tag.feature:13
    Given I have a repository                                             # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                                            # DefaultStepDefinitions.I_have_several_commits()
    When I run the command "tag mytag -m msg"                             # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Created tag mytag ->"               # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain variable "{@ObjectId|localrepo|HEAD}" # DefaultStepDefinitions.checkResponseTextContains(String)
Created tag mytag -> 2b10a2d6176a479379d55f52de737a021a7246fe
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Delete a tag': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Create a new tag for a given commit                            # Tag.feature:20
    Given I have a repository                                              # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                                             # DefaultStepDefinitions.I_have_several_commits()
    When I run the command "tag mytag HEAD^ -m msg"                        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Created tag mytag ->"                # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain variable "{@ObjectId|localrepo|HEAD^}" # DefaultStepDefinitions.checkResponseTextContains(String)
Deleted tag mytag
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Delete an inexistent tag': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Delete a tag                                 # Tag.feature:27
    Given I have a repository                            # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                           # DefaultStepDefinitions.I_have_several_commits()
    And I run the command "tag mytag -m msg"             # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "tag -d mytag"                # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Deleted tag mytag" # DefaultStepDefinitions.the_response_should_contain(String)
Wrong tag name: wrongtag
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to create a tag with too many parameters provided': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Delete an inexistent tag                            # Tag.feature:34
    Given I have a repository                                   # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                                  # DefaultStepDefinitions.I_have_several_commits()
    And I run the command "tag mytag -m msg"                    # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "tag -d wrongtag"                    # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Wrong tag name: wrongtag" # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code                  # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
Too many parameters provided
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to delete a tag with too many parameters provided': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to create a tag with too many parameters provided   # Tag.feature:42
    Given I have a repository                                       # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                                      # DefaultStepDefinitions.I_have_several_commits()
    When I run the command "tag mytag HEAD^ extraparam -m msg"      # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Too many parameters provided" # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code                      # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
Too many parameters provided
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to create a tag with no message': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to delete a tag with too many parameters provided   # Tag.feature:49
    Given I have a repository                                       # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                                      # DefaultStepDefinitions.I_have_several_commits()
    When I run the command "tag -d mytag HEAD^"                     # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Too many parameters provided" # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code                      # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
No tag message provided
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to create a tag with a wrong commit ref': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to create a tag with no message                # Tag.feature:56
    Given I have a repository                                  # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                                 # DefaultStepDefinitions.I_have_several_commits()
    When I run the command "tag mytag HEAD^"                   # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "No tag message provided" # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code                 # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
Wrong reference: aaaaaaaa

  Scenario: Try to create a tag with a wrong commit ref          # Tag.feature:63
    Given I have a repository                                    # DefaultStepDefinitions.I_have_a_repository()
    And I have several commits                                   # DefaultStepDefinitions.I_have_several_commits()
    When I run the command "tag mytag aaaaaaaa -m msg"           # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Wrong reference: aaaaaaaa" # DefaultStepDefinitions.the_response_should_contain(String)
    And it should exit with non-zero exit code                   # DefaultStepDefinitions.it_should_exit_with_non_zero_exit_code()
@Version
Feature: "version" command
    In order to view GeoGig version information
    As a Geogig User
    I want to display information about it
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'I want to view the GeoGig version': Using URIBuilder DefaultTestRepoURIBuilder
         Project Version : 1.4-SNAPSHOT              Build Time : September 30, 2018 at 19:59:41 EDT         Build User Name : GeoGig Bot        Build User Email : geogig-bot@eclipse.org              Git Branch : origin/master           Git Commit ID : 347d8bde47c4500e798dcfb3136234c306994c99         Git Commit Time : September 30, 2018 at 19:41:29 EDT  Git Commit Author Name : Gabriel Roldan Git Commit Author Email : groldan@boundlessgeo.com      Git Commit Message : Merge branch 'bug/update_indexes'
         Project Version : 1.4-SNAPSHOT              Build Time : September 30, 2018 at 19:59:41 EDT         Build User Name : GeoGig Bot        Build User Email : geogig-bot@eclipse.org              Git Branch : origin/master           Git Commit ID : 347d8bde47c4500e798dcfb3136234c306994c99         Git Commit Time : September 30, 2018 at 19:41:29 EDT  Git Commit Author Name : Gabriel Roldan Git Commit Author Email : groldan@boundlessgeo.com      Git Commit Message : Merge branch 'bug/update_indexes'
         Project Version : 1.4-SNAPSHOT              Build Time : September 30, 2018 at 19:59:41 EDT         Build User Name : GeoGig Bot        Build User Email : geogig-bot@eclipse.org              Git Branch : origin/master           Git Commit ID : 347d8bde47c4500e798dcfb3136234c306994c99         Git Commit Time : September 30, 2018 at 19:41:29 EDT  Git Commit Author Name : Gabriel Roldan Git Commit Author Email : groldan@boundlessgeo.com      Git Commit Message : Merge branch 'bug/update_indexes'

  Scenario: I want to view the GeoGig version          # Version.feature:7
    Given I am in an empty directory                   # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "version"                   # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Project Version" # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Build Time"       # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Git Commit ID"    # DefaultStepDefinitions.the_response_should_contain(String)

263 Scenarios (263 passed)
1765 Steps (1765 passed)
7m26.978s

Tests run: 2028, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 449.671 sec - in org.locationtech.geogig.cli.test.functional.RunPorcelainFunctionalTest

Results :

Tests run: 3098, Failures: 0, Errors: 0, Skipped: 0

[JENKINS] Recording test results
[INFO] 
[INFO] --- maven-jar-plugin:3.0.2:jar (default-jar) @ geogig-cli-core ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/core/target/geogig-cli-core-1.4-SNAPSHOT.jar
[INFO] 
[INFO] --- maven-jar-plugin:3.0.2:test-jar (default) @ geogig-cli-core ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/core/target/geogig-cli-core-1.4-SNAPSHOT-tests.jar
[INFO] 
[INFO] >>> maven-source-plugin:3.0.1:jar (attach-sources) > generate-sources @ geogig-cli-core >>>
[INFO] 
[INFO] --- git-commit-id-plugin:2.2.2:revision (default) @ geogig-cli-core ---
[WARNING] Failed to getClass for org.apache.maven.plugins.source.SourceJarMojo
[INFO] 
[INFO] <<< maven-source-plugin:3.0.1:jar (attach-sources) < generate-sources @ geogig-cli-core <<<
[INFO] 
[INFO] 
[INFO] --- maven-source-plugin:3.0.1:jar (attach-sources) @ geogig-cli-core ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/core/target/geogig-cli-core-1.4-SNAPSHOT-sources.jar
[INFO] 
[INFO] >>> maven-source-plugin:3.0.1:test-jar (attach-sources) > generate-sources @ geogig-cli-core >>>
[INFO] 
[INFO] --- git-commit-id-plugin:2.2.2:revision (default) @ geogig-cli-core ---
[WARNING] Failed to getClass for org.apache.maven.plugins.source.TestSourceJarMojo
[INFO] 
[INFO] <<< maven-source-plugin:3.0.1:test-jar (attach-sources) < generate-sources @ geogig-cli-core <<<
[INFO] 
[INFO] 
[INFO] --- maven-source-plugin:3.0.1:test-jar (attach-sources) @ geogig-cli-core ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/core/target/geogig-cli-core-1.4-SNAPSHOT-test-sources.jar
[INFO] 
[INFO] --- maven-install-plugin:2.4:install (default-install) @ geogig-cli-core ---
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/core/target/geogig-cli-core-1.4-SNAPSHOT.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/.repository/org/locationtech/geogig/geogig-cli-core/1.4-SNAPSHOT/geogig-cli-core-1.4-SNAPSHOT.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/core/pom.xml to /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/.repository/org/locationtech/geogig/geogig-cli-core/1.4-SNAPSHOT/geogig-cli-core-1.4-SNAPSHOT.pom
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/core/target/geogig-cli-core-1.4-SNAPSHOT-tests.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/.repository/org/locationtech/geogig/geogig-cli-core/1.4-SNAPSHOT/geogig-cli-core-1.4-SNAPSHOT-tests.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/core/target/geogig-cli-core-1.4-SNAPSHOT-sources.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/.repository/org/locationtech/geogig/geogig-cli-core/1.4-SNAPSHOT/geogig-cli-core-1.4-SNAPSHOT-sources.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/src/cli/core/target/geogig-cli-core-1.4-SNAPSHOT-test-sources.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-master/workspace/.repository/org/locationtech/geogig/geogig-cli-core/1.4-SNAPSHOT/geogig-cli-core-1.4-SNAPSHOT-test-sources.jar
[JENKINS] Archiving disabled