SuccessConsole Output

Started calculate disk usage of build
Finished Calculation of disk usage of build in 0 seconds
Started calculate disk usage of workspace
Finished Calculation of disk usage of workspace in 0 seconds
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building GeoTools Extension 1.1-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] 
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ geogig-geotools ---
[INFO] Deleting /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target
[INFO] 
[INFO] --- git-commit-id-plugin:2.2.2:revision (default) @ geogig-geotools ---
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ geogig-geotools ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 2 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ geogig-geotools ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 62 source files to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/classes
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java uses unchecked or unsafe operations.
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java: Recompile with -Xlint:unchecked for details.
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ geogig-geotools ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 14 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ geogig-geotools ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 33 source files to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/test/java/org/locationtech/geogig/geotools/test/storage/MemoryDataStoreWithProvidedFIDSupport.java: Some input files use unchecked or unsafe operations.
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/test/java/org/locationtech/geogig/geotools/test/storage/MemoryDataStoreWithProvidedFIDSupport.java: Recompile with -Xlint:unchecked for details.
[INFO] 
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ geogig-geotools ---
[INFO] Surefire report directory: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/surefire-reports

-------------------------------------------------------
 T E S T S
-------------------------------------------------------

-------------------------------------------------------
 T E S T S
-------------------------------------------------------
Running org.locationtech.geogig.geotools.cli.geojson.GeoJsonImportTest
Running org.locationtech.geogig.geotools.cli.geojson.GeoJsonExportTest
Running org.locationtech.geogig.geotools.cli.shp.ShpImportTest
Running org.locationtech.geogig.geotools.cli.shp.RunShpFunctionalTest
Running org.locationtech.geogig.geotools.cli.shp.ShpExportTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgDescribeTest
Running org.locationtech.geogig.geotools.cli.geopkg.RunGeoPkgFunctionalTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgPullTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgImportTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgListTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgExportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleImportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleListTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleExportTest
Running org.locationtech.geogig.geotools.cli.postgis.PGExportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleDescribeTest
Running org.locationtech.geogig.geotools.cli.postgis.PGImportTest
Running org.locationtech.geogig.geotools.cli.postgis.PGDescribeTest
Running org.locationtech.geogig.geotools.plumbing.ExportOpTest
Running org.locationtech.geogig.geotools.cli.postgis.PGListTest
Running org.locationtech.geogig.geotools.plumbing.ImportOpTest
Running org.locationtech.geogig.geotools.plumbing.ExportDiffOpTest
Running org.locationtech.geogig.geotools.plumbing.DescribeOpTest
Running org.locationtech.geogig.geotools.plumbing.ListOpTest
Feature: "shp export" command
    In order to export data to Geogig
    As a Geogig User
    I want to export from the repository to a shapefile
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
Feature: "geopkg describe" command
    In order to understand the structure of a table in a GeoPackage file
    As a Geogig User
    I want Geogig to describe the table
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try describing a GeoPackage table from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
Usage: geogig describe [options]
  Options:
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test3897191751265272735.gpkg
  * --table, -t
       Table to describe.
       Default: <empty string>
    --user, -U
       User name.  Default: user
       Default: user

The shapefile '/home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp' could not be found, skipping...
The GeoJSON file 'file://nonexistent.geojson' could not be found, skipping...
Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Importing table2           (1/2)... 
Importing from database database
Usage: geogig describe [options]
  Options:
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
  * --table, -t
       Table to describe.
       Default: <empty string>
    --user, -U
       User name.  Default: postgres
       Default: postgres

Usage: geogig import [options] <geojson> [<geojson>]...
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --geom-name
       Name to use for geometry attribute, replacing the default one
       ('geometry')
    --geom-name-auto
       Uses the name of the geometry descriptor in the destination feature type
       Default: false

0%
1 features inserted in 43.27 ms

Building final tree table2...

1 features tree built in 1.383 ms

Importing table1           (2/2)... 
Usage: geogig export [options] <path> <geojson>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

Importing from database database
Importing from GeoJSON /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/geojson/sample.geojson

Importing feature          (1/1)... 
2017-06-23T09:41:13.827-0400  SEVERE  Connection error: 
org.postgresql.util.PSQLException: The connection attempt failed.
	at org.postgresql.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:275)
	at org.postgresql.core.ConnectionFactory.openConnection(ConnectionFactory.java:49)
	at org.postgresql.jdbc.PgConnection.<init>(PgConnection.java:194)
	at org.postgresql.Driver.makeConnection(Driver.java:450)
	at org.postgresql.Driver.connect(Driver.java:252)
	at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:38)
	at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:582)
	at org.apache.commons.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:1556)
	at org.apache.commons.dbcp.BasicDataSource.createPoolableConnectionFactory(BasicDataSource.java:1545)
	at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1388)
	at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:1044)
	at org.geotools.data.jdbc.datasource.AbstractManageableDataSource.getConnection(AbstractManageableDataSource.java:48)
	at org.locationtech.geogig.geotools.cli.postgis.PGSupport.getDataStore(PGSupport.java:74)
	at org.locationtech.geogig.geotools.cli.postgis.PGDescribe.getDataStore(PGDescribe.java:40)
	at org.locationtech.geogig.geotools.cli.DataStoreDescribe.runInternal(DataStoreDescribe.java:51)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.geotools.cli.postgis.PGDescribeTest.testInvalidDatabaseParams(PGDescribeTest.java:76)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
	at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
	at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
	at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:17)
	at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:26)
	at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:27)
	at org.junit.rules.ExpectedException$ExpectedExceptionStatement.evaluate(ExpectedException.java:239)
	at org.junit.rules.ExternalResource$1.evaluate(ExternalResource.java:48)
	at org.junit.rules.RunRules.evaluate(RunRules.java:20)
	at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:325)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:78)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:57)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
Caused by: java.net.UnknownHostException: nonexistent
	at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:184)
	at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392)
	at java.net.Socket.connect(Socket.java:589)
	at org.postgresql.core.PGStream.<init>(PGStream.java:68)
	at org.postgresql.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:144)
	... 44 more


Exporting from WORK_HEAD:Points to Points... 
33%
100%
0%
WORK_HEAD:Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit9000461457051846078/repo-1033933770/TestPoints.geojson

2 features inserted in 94.19 ms

Building final tree feature...

2 features tree built in 11.88 ms
100%
100%
/home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/geojson/sample.geojson imported successfully.
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 9.273 sec - in org.locationtech.geogig.geotools.cli.geojson.GeoJsonImportTest
Running org.locationtech.geogig.geotools.plumbing.FeatureTypeAdapterFeatureSourceTest
Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.03 sec - in org.locationtech.geogig.geotools.plumbing.FeatureTypeAdapterFeatureSourceTest
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a feature type': Using URIBuilder DefaultTestRepoURIBuilder
Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 8.569 sec - in org.locationtech.geogig.geotools.plumbing.ExportDiffOpTest
Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test9166229579356444708.gpkg

Importing Lines            (1/2)... 

Exporting from Points to Points... 
33%
Exporting from Points to Points... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit6285329821744813391/repo-2110029502/TestPoints.geojson
67%
100%
Points exported successfully to Points

Exporting repository metadata from 'HEAD:Points' (commit 40b0e04c89b5b6b5c37aec17b0f55a3000127854)...

Creating audit metadata for table 'Points'

  Scenario: Try exporting from an empty directory                    # ShpExport.feature:6
    Given I am in an empty directory                                 # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "shp export Points Points.shp"            # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should start with "Not in a geogig repository" # DefaultStepDefinitions.the_response_should_start_with(String)
0%
Exporting from Points to Points... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit5545513848222095001/repo-741952692/TestPoints.geojson

Exporting from Lines to Lines... 
33%
Lines exported successfully to /opt/public/hipp/ramdisk/geogig/junit5545513848222095001/repo-741952692/TestPoints.geojson
Tests run: 6, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 10.566 sec - in org.locationtech.geogig.geotools.cli.geojson.GeoJsonExportTest
0%
3 features inserted in 166.3 ms

Building final tree Lines...

3 features tree built in 1.146 ms
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 9.596 sec - in org.locationtech.geogig.geotools.plumbing.DescribeOpTest

Importing Points           (2/2)... 

Exporting from Points to Points... 
33%
Fetching table...
1%
Importing changes to table Points onto feature tree Points...
0%
3 features inserted in 21.72 ms

Building final tree Points...

3 features tree built in 13.49 ms
67%
Fetching table...
100%
Points exported successfully to Points
100%
Import successful.

Exporting repository metadata from 'HEAD:Points' (commit 3eee4851facb59e11aedbd2c8f0b6c1732a56509)...

Creating audit metadata for table 'Points'
Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 10.33 sec - in org.locationtech.geogig.geotools.plumbing.ExportOpTest
Fetching table...
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------
Fetching table...
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 10.538 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleDescribeTest
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 10.018 sec - in org.locationtech.geogig.geotools.plumbing.ListOpTest
Importing from database database
Import successful.
Changes committed and merge at 88692d7f75d777dde2b8510134908bdf665f4648
The shapefile 'file://nonexistent.shp' could not be found, skipping...
Importing from database database
Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test1094986225313777743.gpkg

Importing Points           (1/1)... 
0%
3 features inserted in 14.75 ms

Building final tree Points...

3 features tree built in 1.092 ms
100%
Import successful.
Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 11.736 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgImportTest
Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Fetching feature types...
 - table4
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable
Fetching table...
Fetching feature types...

Exporting from Points to Points... 
33%
100%
Points exported successfully to Points

Exporting repository metadata from 'HEAD:Points' (commit fe7efdd13cc56112cfd05462873e59e722eace9a)...

Creating audit metadata for table 'Points'
2017-06-23T09:41:17.795-0400  SEVERE  Connection error: 
org.postgresql.util.PSQLException: The connection attempt failed.
	at org.postgresql.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:275)
	at org.postgresql.core.ConnectionFactory.openConnection(ConnectionFactory.java:49)
	at org.postgresql.jdbc.PgConnection.<init>(PgConnection.java:194)
	at org.postgresql.Driver.makeConnection(Driver.java:450)
	at org.postgresql.Driver.connect(Driver.java:252)
	at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:38)
	at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:582)
	at org.apache.commons.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:1556)
	at org.apache.commons.dbcp.BasicDataSource.createPoolableConnectionFactory(BasicDataSource.java:1545)
	at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1388)
	at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:1044)
	at org.geotools.data.jdbc.datasource.AbstractManageableDataSource.getConnection(AbstractManageableDataSource.java:48)
	at org.locationtech.geogig.geotools.cli.postgis.PGSupport.getDataStore(PGSupport.java:74)
	at org.locationtech.geogig.geotools.cli.postgis.PGImport.getDataStore(PGImport.java:39)
	at org.locationtech.geogig.geotools.cli.DataStoreImport.runInternal(DataStoreImport.java:89)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.geotools.cli.postgis.PGImportTest.testInvalidDatabaseParams(PGImportTest.java:100)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
	at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
	at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
	at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:17)
	at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:26)
	at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:27)
	at org.junit.rules.ExpectedException$ExpectedExceptionStatement.evaluate(ExpectedException.java:239)
	at org.junit.rules.ExternalResource$1.evaluate(ExternalResource.java:48)
	at org.junit.rules.RunRules.evaluate(RunRules.java:20)
	at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:325)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:78)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:57)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
Caused by: java.net.UnknownHostException: nonexistent
	at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:184)
	at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392)
	at java.net.Socket.connect(Socket.java:589)
	at org.postgresql.core.PGStream.<init>(PGStream.java:68)
	at org.postgresql.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:144)
	... 44 more

Fetching feature types...
2017-06-23T09:41:17.921-0400  SEVERE  Connection error: 
org.postgresql.util.PSQLException: The connection attempt failed.
	at org.postgresql.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:275)
	at org.postgresql.core.ConnectionFactory.openConnection(ConnectionFactory.java:49)
	at org.postgresql.jdbc.PgConnection.<init>(PgConnection.java:194)
	at org.postgresql.Driver.makeConnection(Driver.java:450)
	at org.postgresql.Driver.connect(Driver.java:252)
	at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:38)
	at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:582)
	at org.apache.commons.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:1556)
	at org.apache.commons.dbcp.BasicDataSource.createPoolableConnectionFactory(BasicDataSource.java:1545)
	at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1388)
	at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:1044)
	at org.geotools.data.jdbc.datasource.AbstractManageableDataSource.getConnection(AbstractManageableDataSource.java:48)
	at org.locationtech.geogig.geotools.cli.postgis.PGSupport.getDataStore(PGSupport.java:74)
	at org.locationtech.geogig.geotools.cli.postgis.PGList.getDataStore(PGList.java:42)
	at org.locationtech.geogig.geotools.cli.DataStoreList.runInternal(DataStoreList.java:41)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.geotools.cli.postgis.PGListTest.testInvalidDatabaseParams(PGListTest.java:69)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
	at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
	at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
	at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:17)
	at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:26)
	at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:27)
	at org.junit.rules.ExpectedException$ExpectedExceptionStatement.evaluate(ExpectedException.java:239)
	at org.junit.rules.ExternalResource$1.evaluate(ExternalResource.java:48)
	at org.junit.rules.RunRules.evaluate(RunRules.java:20)
	at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:325)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:78)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:57)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
Caused by: java.net.UnknownHostException: nonexistent
	at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:184)
	at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392)
	at java.net.Socket.connect(Socket.java:589)
	at org.postgresql.core.PGStream.<init>(PGStream.java:68)
	at org.postgresql.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:144)
	... 44 more


Importing changes to table Points onto feature tree Points...
Fetching table...
0%
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to. Default: database
       Default: database
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: oracle
       Default: oracle

Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.091 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleListTest
Importing from database database
Usage: geogig import [options] <shapefile> [<shapefile>]...
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --charset
       Use the specified charset to decode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --create, -c
       Only create the schema, do not actually import its features
       Default: false
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false

Importing from database database
Import successful.
Changes committed and merge at df6ef25759b134f1c1c2555a124e21079e6d438e
Fetching feature types...
 - table4
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable
Importing from database database
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------

Importing table2           (1/2)... 
Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Importing table4           (1/8)... 
Fetching feature types...

Importing table3           (2/8)... 
0%
1 features inserted in 2.863 ms

Building final tree table3...

1 features tree built in 679.6 μs

Importing table2           (3/8)... 
Fetching feature types...
Fetching table...
Tests run: 8, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.337 sec - in org.locationtech.geogig.geotools.cli.postgis.PGDescribeTest
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Could not find the specified table.
org.locationtech.geogig.cli.CommandFailedException: Could not find the specified table.
	at org.locationtech.geogig.geotools.cli.DataStoreDescribe.runInternal(DataStoreDescribe.java:68)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)

1 features inserted in 2.541 ms

Building final tree table2...

1 features tree built in 691.8 μs
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: postgres
       Default: postgres

Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.439 sec - in org.locationtech.geogig.geotools.cli.postgis.PGListTest

Importing table1           (4/8)... 
Fetching table...
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------
0%
2 features inserted in 3.634 ms

Building final tree table1...

2 features tree built in 9.360 ms

Importing shpLikeTable2    (5/8)... 

1 features inserted in 7.531 ms

Building final tree shpLikeTable2...

1 features tree built in 826.1 μs

Exporting from Points to Points... 
33%
Importing shpLikeTable     (6/8)... 
Importing from database database
100%
Points exported successfully to Points

Exporting repository metadata from 'HEAD:Points' (commit 5a803a427f707cb6ab5c1d8e1edbad1b378fe482)...

Creating audit metadata for table 'Points'
1%
1 features inserted in 2.561 ms

Building final tree shpLikeTable...

1 features tree built in 562.1 μs
0%
1 features inserted in 32.53 ms

Building final tree table2...

1 features tree built in 6.126 ms
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try describing a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder

Importing table1           (2/2)... 

Importing table2           (1/2)... 

Importing GeoJsonLikeTa... (7/8)... 
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: database.gpkg
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    -i, --interchange
       Export as geogig mobile interchange format
       Default: false
    --overwrite, -o
       Overwrite output table
       Default: false
    --user, -U
       User name.  Default: user
       Default: user

Importing from database database
Fetching table...
Tests run: 8, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.4 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgDescribeTest
1%
1 features inserted in 1.708 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 518.9 μs

Importing GeoJsonLikeTable (8/8)... 

1 features inserted in 2.359 ms

Building final tree GeoJsonLikeTable...
Importing from database database

Importing table1           (1/1)... 

1 features tree built in 6.890 ms

Importing changes to table Points onto feature tree Points...
0%
0%
2 features inserted in 6.031 ms

Building final tree table1...

2 features tree built in 4.707 ms
100%
/home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp imported successfully.
100%
Import successful.
Importing from database database
Tests run: 10, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.698 sec - in org.locationtech.geogig.geotools.cli.shp.ShpImportTest
Usage: geogig import [options]
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --all
       Import all tables.
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --database, -D
       The database to connect to.  Default: database
       Default: database
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --table, -t
       Table to import.
       Default: <empty string>
    --user, -U
       User name.  Default: postgres
       Default: postgres

0%
1 features inserted in 22.35 ms

Building final tree table2...

1 features tree built in 1.035 ms

Importing table1           (2/2)... 
Fetching feature types...
Importing from database database

 - table4
 - table3
 - table2
Importing table4           (1/8)... 
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable

Importing table3           (2/8)... 
0%
1 features inserted in 2.952 ms

Building final tree table3...

1 features tree built in 684.5 μs

Importing table2           (3/8)... 

  Scenario: Try describing a GeoPackage table from an empty directory                    # GeoPkgDescribe.feature:6
    Given I am in an empty directory                                                     # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg describe --table test" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."               # DefaultStepDefinitions.the_response_should_contain(String)
Fetching feature types...
Importing from database database

1 features inserted in 2.312 ms

Building final tree table2...

1 features tree built in 747.5 μs

Importing table1           (4/8)... 
Fetching feature types...

2 features inserted in 3.339 ms

Building final tree table1...

2 features tree built in 4.362 ms
Importing from database database

Importing shpLikeTable2    (5/8)... 

Importing table1           (1/1)... 
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.825 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgPullTest
0%
0%
1 features inserted in 3.011 ms

Building final tree shpLikeTable2...

1 features tree built in 642.1 μs

2 features inserted in 6.334 ms

Building final tree table1...

2 features tree built in 5.338 ms

Importing shpLikeTable     (6/8)... 

Exporting from WORK_HEAD:Points to Points... 
33%
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

100%
Import successful.
100%
WORK_HEAD:Points exported successfully to Points
Importing from database database
1%
1 features inserted in 1.770 ms

Building final tree shpLikeTable...
2017-06-23T09:41:19.803-0400  SEVERE  There's code using JDBC based datastore and not disposing them. This may lead to temporary loss of database connections. Please make sure all data access code calls DataStore.dispose() before freeing all references to it
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: database.gpkg
    --user, -U
       User name.  Default: user
       Default: user


Exporting from WORK_HEAD:Lines to Lines... 
33%
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.957 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgListTest

1 features tree built in 2.769 ms
WORK_HEAD:Lines exported successfully to Lines

Importing GeoJsonLikeTa... (7/8)... 
Usage: geogig import [options]
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --all
       Import all tables.
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --database, -D
       The database to connect to. Default: database
       Default: database
    -d, --dest
       Path to import to
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --table, -t
       Table to import.
       Default: <empty string>
    --user, -U
       User name.  Default: oracle
       Default: oracle


1 features inserted in 1.662 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 1.984 ms
Importing from database database

Importing table4           (1/8)... 

Importing table3           (2/8)... 

Importing GeoJsonLikeTable (8/8)... 
0%
1 features inserted in 3.428 ms

Building final tree table3...

1 features tree built in 824.3 μs

Importing table2           (3/8)... 
1%
1 features inserted in 2.104 ms

Building final tree GeoJsonLikeTable...

1 features tree built in 2.473 ms
100%

1 features inserted in 2.367 ms

Building final tree table2...

1 features tree built in 1.113 ms
Import successful.

Importing table1           (4/8)... 

2 features inserted in 3.655 ms

Building final tree table1...

2 features tree built in 5.292 ms
Tests run: 12, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.024 sec - in org.locationtech.geogig.geotools.cli.postgis.PGImportTest

Importing shpLikeTable2    (5/8)... 
0%
1 features inserted in 2.975 ms

Building final tree shpLikeTable2...

1 features tree built in 601.4 μs

Importing shpLikeTable     (6/8)... 
2017-06-23T09:41:20.221-0400  SEVERE  There's code using JDBC based datastore and not disposing them. This may lead to temporary loss of database connections. Please make sure all data access code calls DataStore.dispose() before freeing all references to it

1 features inserted in 1.515 ms

Building final tree shpLikeTable...

1 features tree built in 2.160 ms

Importing GeoJsonLikeTa... (7/8)... 
1%
1 features inserted in 1.877 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 2.993 ms

Importing GeoJsonLikeTable (8/8)... 

1 features inserted in 1.514 ms

Building final tree GeoJsonLikeTable...

1 features tree built in 2.971 ms
100%
Import successful.
Tests run: 12, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.576 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleImportTest
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to describe a GeoPackage table that doesn't exit in the database': Using URIBuilder DefaultTestRepoURIBuilder

Exporting from Points to Points... 
33%
100%
Points exported successfully to Points

  Scenario: Try describing a GeoPackage table                                              # GeoPkgDescribe.feature:11
    Given I have a repository                                                              # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg describe --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Table : Points"                                      # DefaultStepDefinitions.the_response_should_contain(String)

Exporting from WORK_HEAD:Points to TestPoints... 
33%
100%
WORK_HEAD:Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit4547049853102645716/repo-1004495356/TestPoints.shp

Exporting from WORK_HEAD:Points to testTable... 
33%
Exporting from Points to TestPoints... 
33%
Exporting from Points to Points... 
33%
100%
Points exported successfully to Points
100%
WORK_HEAD:Points exported successfully to testTable

Exporting from Lines to testTable... 
33%
Lines exported successfully to testTable

Exporting from Lines to Points... 
33%
Lines exported successfully to Points
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Could not find the specified table.
org.locationtech.geogig.cli.CommandFailedException: Could not find the specified table.
	at org.locationtech.geogig.geotools.cli.DataStoreDescribe.runInternal(DataStoreDescribe.java:68)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 15.928 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgExportTest

Exporting from Points to Points... 
33%
100%
Points exported successfully to Points
  Scenario: Try to describe a GeoPackage table that doesn't exit in the database                      # GeoPkgDescribe.feature:16
    Given I have a repository                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg describe --table nonexistant_table" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."                            # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg export" command
    In order to export data to Geogig
    As a Geogig User
    I want to export from the repository into a GeoPackage file
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a feature type': Using URIBuilder DefaultTestRepoURIBuilder

Exporting from WORK_HEAD:Points to testTable... 
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to. Default: database
       Default: database
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --overwrite, -o
       Overwrite output table
       Default: false
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: oracle
       Default: oracle

Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 16.463 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleExportTest
33%
Exporting from Points to TestPoints... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit5188670799318143164/repo-409530977/TestPoints.shp
100%
WORK_HEAD:Points exported successfully to testTable

Exporting from Lines to testTable... 
33%
Lines exported successfully to testTable

  Scenario: Try exporting from an empty directory                                 # GeoPkgExport.feature:6
    Given I am in an empty directory                                              # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg export Points Points" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository:"             # DefaultStepDefinitions.the_response_should_start_with(String)

Exporting from Points to TestPoints... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit8240159590146686653/repo-1846754866/TestPoints.shp

Exporting from Lines to TestPoints... 
33%
Lines exported successfully to /opt/public/hipp/ramdisk/geogig/junit8240159590146686653/repo-1846754866/TestPoints.shp
Tests run: 10, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 17.122 sec - in org.locationtech.geogig.geotools.cli.shp.ShpExportTest

Exporting from Points to Points... 
33%
100%
Points exported successfully to Points
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting an inexistent feature type': Using URIBuilder DefaultTestRepoURIBuilder
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --overwrite, -o
       Overwrite output table
       Default: false
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: postgres
       Default: postgres

Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 17.136 sec - in org.locationtech.geogig.geotools.cli.postgis.PGExportTest

  Scenario: Try exporting a feature type                                          # ShpExport.feature:11
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                        # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "shp export -o Points Points.shp"                      # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting an inexistent feature type': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting a feature type                                               # GeoPkgExport.feature:11
    Given I have a repository                                                          # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                             # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export -o Points MyPoints" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "Points exported successfully to MyPoints"        # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting an inexistent feature type                                      # ShpExport.feature:17
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "shp export WRONGTABLE Points.shp"                             # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "pathspec 'WRONGTABLE' did not match any valid path" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting to a table that already exists': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types using the default feature type': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting an inexistent feature type                                      # GeoPkgExport.feature:17
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export WRONGTABLE Points" on a new GeoPackage file     # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "pathspec 'WRONGTABLE' did not match any valid path" # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting with mixed feature types                                                    # ShpExport.feature:23
    Given I have a repository                                                                         # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                                        # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o Points Points.shp"                                          # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "The selected tree contains mixed feature types"                 # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Use --defaulttype or --featuretype <feature_type_ref> to export" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types using --alter': Using URIBuilder DefaultTestRepoURIBuilder
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - The selected table already exists. Use -o to overwrite
org.locationtech.geogig.cli.CommandFailedException: The selected table already exists. Use -o to overwrite
	at org.locationtech.geogig.geotools.cli.DataStoreExport.exportInternal(DataStoreExport.java:134)
	at org.locationtech.geogig.geotools.cli.DataStoreExport.runInternal(DataStoreExport.java:99)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgExport.runInternal(GeopkgExport.java:75)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)

  Scenario: Try exporting with mixed feature types using the default feature type # ShpExport.feature:30
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                    # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o --defaulttype Points Points.shp"        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a table from HEAD': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting to a table that already exists                                      # GeoPkgExport.feature:23
    Given I have a repository                                                                 # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                    # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export Points Points" on an existing GeoPackage file       # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "The selected table already exists. Use -o to overwrite" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a table from HEAD': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting with mixed feature types using --alter                  # ShpExport.feature:36
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                    # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o --defaulttype Points Points.shp"        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting a table from HEAD                                                       # GeoPkgExport.feature:29
    Given I have a repository                                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                        # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "commit -m TestCommit"                                                 # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "geopkg export -o HEAD:Points CommitedPoints" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "Points exported successfully to CommitedPoints"             # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg import" command
    In order to import data to Geogig
    As a Geogig User
    I want to import one or more tables from a GeoPackage file
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try importing into an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try importing into an empty directory                                        # GeoPkgImport.feature:6
    Given I am in an empty directory                                                     # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg import --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"                     # DefaultStepDefinitions.the_response_should_start_with(String)

  Scenario: Try exporting a table from HEAD                                               # ShpExport.feature:42
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "commit -m TestCommit"                                         # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "shp export -o HEAD:Points CommitedPoints.shp"                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to CommitedPoints.shp" # DefaultStepDefinitions.the_response_should_contain(String)

7 Scenarios (7 passed)
29 Steps (29 passed)
0m22.327s

Tests run: 36, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 24.03 sec - in org.locationtech.geogig.geotools.cli.shp.RunShpFunctionalTest
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a full GeoPackage file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a GeoPackage table                                             # GeoPkgImport.feature:11
    Given I have a repository                                                            # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Import successful."                                # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a GeoPackage table that doesn't exit in the file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a full GeoPackage file                                # GeoPkgImport.feature:16
    Given I have a repository                                                   # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --all" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Import successful."                       # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import without specifying table or -all': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a GeoPackage table that doesn't exit in the file                          # GeoPkgImport.feature:21
    Given I have a repository                                                                       # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table nonexistant_table" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."                          # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import with table and -all': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import without specifying table or -all                                               # GeoPkgImport.feature:26
    Given I have a repository                                                                            # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import" on an existing GeoPackage file                                # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "No tables specified for import. Specify --all or --table <table>." # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try to import with table and -all                                                  # GeoPkgImport.feature:31
    Given I have a repository                                                                  # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table Points --all" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Specify --all or --table <table>, both cannot be set."   # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg list" command
    In order to know all of the features available in a GeoPackage file
    As a Geogig User
    I want to list all of the features
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try listing from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try listing from a valid directory': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try listing from an empty directory                         # GeoPkgList.feature:6
    Given I am in an empty directory                                    # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg list" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"    # DefaultStepDefinitions.the_response_should_start_with(String)

  Scenario: Try listing from a valid directory                          # GeoPkgList.feature:11
    Given I have a repository                                           # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg list" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Points"                           # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg pull" command
    In order to import data to Geogig
    As a Geogig User
    I want to import one or more tables from a GeoPackage file with the interchange format
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try pulling into an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table without commit message': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try pulling into an empty directory                                        # GeoPkgPull.feature:6
    Given I am in an empty directory                                                   # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg pull --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"                   # DefaultStepDefinitions.the_response_should_start_with(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Commit message not provided
java.lang.IllegalArgumentException: Commit message not provided
	at com.google.common.base.Preconditions.checkArgument(Preconditions.java:122)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:64)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(GeoPkgStepDefinitions.java:116)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table without commit message                                  # GeoPkgPull.feature:11
    Given I have a repository                                                                      # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Commit message not provided"                                 # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table that doesn't exit in the file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table                                                                            # GeoPkgPull.feature:16
    Given I have a repository                                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Import successful."                                                             # DefaultStepDefinitions.the_response_should_contain(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Unable to import: No table to import.
java.lang.IllegalStateException: No table to import.
	at com.google.common.base.Preconditions.checkState(Preconditions.java:173)
	at org.locationtech.geogig.geotools.geopkg.InterchangeFormat.importAuditLog(InterchangeFormat.java:270)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:81)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(GeoPkgStepDefinitions.java:116)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull without specifying table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table that doesn't exit in the file                                                         # GeoPkgPull.feature:21
    Given I have a repository                                                                                                    # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table nonexistant_table --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Unable to import: No table to import."                                                     # DefaultStepDefinitions.the_response_should_contain(String)
[main] WARN org.locationtech.geogig.geotools.plumbing.ImportOp - Error looking for known identifier for CRS null
org.locationtech.geogig.porcelain.CRSException: Could not find identifier associated with the defined CRS: 
GEOGCS["GCS_WGS_1985", 
  DATUM["D_WGS_1985", 
    SPHEROID["WGS_1985", 6378137.0, 298.257223563]], 
  PRIMEM["Greenwich", 0.0], 
  UNIT["degree", 0.017453292519943295], 
  AXIS["Longitude", EAST], 
  AXIS["Latitude", NORTH]]
	at org.locationtech.geogig.repository.impl.SpatialOps.findKnownCrs(SpatialOps.java:218)
	at org.locationtech.geogig.repository.impl.SpatialOps.findIdentifier(SpatialOps.java:202)
	at org.locationtech.geogig.geotools.plumbing.ImportOp.tryForceKnownCRS(ImportOp.java:281)
	at org.locationtech.geogig.geotools.plumbing.ImportOp._call(ImportOp.java:221)
	at org.locationtech.geogig.geotools.plumbing.ImportOp._call(ImportOp.java:87)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.plumbing.ImportOpTest.testForcedKnownCrsIdentifierNoMatch(ImportOpTest.java:479)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
	at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
	at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
	at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:17)
	at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:26)
	at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:27)
	at org.junit.rules.ExpectedException$ExpectedExceptionStatement.evaluate(ExpectedException.java:239)
	at org.junit.rules.ExternalResource$1.evaluate(ExternalResource.java:48)
	at org.junit.rules.RunRules.evaluate(RunRules.java:20)
	at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:325)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:78)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:57)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
Tests run: 24, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 28.103 sec - in org.locationtech.geogig.geotools.plumbing.ImportOpTest
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table with a conflict': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull without specifying table                                                       # GeoPkgPull.feature:26
    Given I have a repository                                                                          # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Import successful."                                              # DefaultStepDefinitions.the_response_should_contain(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - CONFLICT: Merge conflict in Points/Points.1
Automatic merge failed. Fix conflicts and then commit the result.

org.locationtech.geogig.geotools.geopkg.GeopkgMergeConflictsException: CONFLICT: Merge conflict in Points/Points.1
Automatic merge failed. Fix conflicts and then commit the result.

	at org.locationtech.geogig.geotools.geopkg.InterchangeFormat.importAuditLog(InterchangeFormat.java:342)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:81)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file_with_conflict(GeoPkgStepDefinitions.java:157)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)

  Scenario: Try to pull a GeoPackage table with a conflict                                                                            # GeoPkgPull.feature:31
    Given I have a repository                                                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points --message imported" on an existing interchange GeoPackage file with a conflict # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file_with_conflict(String)
    Then the response should contain "CONFLICT: Merge conflict in"                                                                    # DefaultStepDefinitions.the_response_should_contain(String)

22 Scenarios (22 passed)
71 Steps (71 passed)
0m27.154s

Tests run: 93, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 29.393 sec - in org.locationtech.geogig.geotools.cli.geopkg.RunGeoPkgFunctionalTest

Results :

Tests run: 316, Failures: 0, Errors: 0, Skipped: 0

[JENKINS] Recording test results
[INFO] 
[INFO] --- maven-jar-plugin:2.4:jar (default-jar) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT.jar
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-tests.jar
[INFO] 
[INFO] >>> maven-source-plugin:2.2.1:jar (attach-sources) > generate-sources @ geogig-geotools >>>
[INFO] 
[INFO] --- git-commit-id-plugin:2.2.2:revision (default) @ geogig-geotools ---
[WARNING] Failed to getClass for org.apache.maven.plugin.source.SourceJarMojo
[INFO] 
[INFO] <<< maven-source-plugin:2.2.1:jar (attach-sources) < generate-sources @ geogig-geotools <<<
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar (attach-sources) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-sources.jar
[INFO] 
[INFO] >>> maven-source-plugin:2.2.1:test-jar (attach-sources) > generate-sources @ geogig-geotools >>>
[INFO] 
[INFO] --- git-commit-id-plugin:2.2.2:revision (default) @ geogig-geotools ---
[WARNING] Failed to getClass for org.apache.maven.plugin.source.TestSourceJarMojo
[INFO] 
[INFO] <<< maven-source-plugin:2.2.1:test-jar (attach-sources) < generate-sources @ geogig-geotools <<<
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:test-jar (attach-sources) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-test-sources.jar
[INFO] 
[INFO] --- maven-install-plugin:2.4:install (default-install) @ geogig-geotools ---
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/pom.xml to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT.pom
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-tests.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-tests.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-sources.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-sources.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-test-sources.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-test-sources.jar
[JENKINS] Archiving disabled