SuccessConsole Output

Started calculate disk usage of build
Finished Calculation of disk usage of build in 0 seconds
Started calculate disk usage of workspace
Finished Calculation of disk usage of workspace in 0 seconds
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building GeoTools Extension 1.1-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] 
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ geogig-geotools ---
[INFO] Deleting /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target
[INFO] 
[INFO] --- git-commit-id-plugin:2.1.8:revision (default) @ geogig-geotools ---
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ geogig-geotools ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 2 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ geogig-geotools ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 62 source files to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/classes
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java uses unchecked or unsafe operations.
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java: Recompile with -Xlint:unchecked for details.
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ geogig-geotools ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 14 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ geogig-geotools ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 33 source files to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/test/java/org/locationtech/geogig/geotools/test/storage/MemoryDataStoreWithProvidedFIDSupport.java: Some input files use unchecked or unsafe operations.
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/test/java/org/locationtech/geogig/geotools/test/storage/MemoryDataStoreWithProvidedFIDSupport.java: Recompile with -Xlint:unchecked for details.
[INFO] 
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ geogig-geotools ---
[INFO] Surefire report directory: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/surefire-reports

-------------------------------------------------------
 T E S T S
-------------------------------------------------------

-------------------------------------------------------
 T E S T S
-------------------------------------------------------
Running org.locationtech.geogig.geotools.cli.geojson.GeoJsonImportTest
Running org.locationtech.geogig.geotools.cli.geojson.GeoJsonExportTest
Running org.locationtech.geogig.geotools.cli.shp.ShpImportTest
Running org.locationtech.geogig.geotools.cli.shp.RunShpFunctionalTest
Running org.locationtech.geogig.geotools.cli.shp.ShpExportTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgDescribeTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgPullTest
Running org.locationtech.geogig.geotools.cli.geopkg.RunGeoPkgFunctionalTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgImportTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgListTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgExportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleListTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleImportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleExportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleDescribeTest
Running org.locationtech.geogig.geotools.cli.postgis.PGExportTest
Running org.locationtech.geogig.geotools.cli.postgis.PGImportTest
Running org.locationtech.geogig.geotools.cli.postgis.PGDescribeTest
Running org.locationtech.geogig.geotools.cli.postgis.PGListTest
Running org.locationtech.geogig.geotools.plumbing.ExportOpTest
Running org.locationtech.geogig.geotools.plumbing.ImportOpTest
Running org.locationtech.geogig.geotools.plumbing.ExportDiffOpTest
Running org.locationtech.geogig.geotools.plumbing.DescribeOpTest
Running org.locationtech.geogig.geotools.plumbing.ListOpTest
Feature: "shp export" command
    In order to export data to Geogig
    As a Geogig User
    I want to export from the repository to a shapefile
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
Usage: geogig describe [options]
  Options:
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test3952229808831283155.gpkg
  * --table, -t
       Table to describe.
       Default: <empty string>
    --user, -U
       User name.  Default: user
       Default: user

Feature: "geopkg describe" command
    In order to understand the structure of a table in a GeoPackage file
    As a Geogig User
    I want Geogig to describe the table
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try describing a GeoPackage table from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
The shapefile '/home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp' could not be found, skipping...
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 6.828 sec - in org.locationtech.geogig.geotools.plumbing.DescribeOpTest
Running org.locationtech.geogig.geotools.plumbing.FeatureTypeAdapterFeatureSourceTest
The GeoJSON file 'file://nonexistent.geojson' could not be found, skipping...
Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.079 sec - in org.locationtech.geogig.geotools.plumbing.FeatureTypeAdapterFeatureSourceTest
Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 7.159 sec - in org.locationtech.geogig.geotools.plumbing.ExportDiffOpTest
Importing from database database

Importing table2           (1/2)... 
Importing from database database
Usage: geogig describe [options]
  Options:
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
  * --table, -t
       Table to describe.
       Default: <empty string>
    --user, -U
       User name.  Default: postgres
       Default: postgres

Usage: geogig import [options] <geojson> [<geojson>]...
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --geom-name
       Name to use for geometry attribute, replacing the default one
       ('geometry')
    --geom-name-auto
       Uses the name of the geometry descriptor in the destination feature type
       Default: false

0%
1 features inserted in 47.49 ms

Building final tree table2...

1 features tree built in 37.89 ms

Importing table1           (2/2)... 
Importing from GeoJSON /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/geojson/sample.geojson

Importing feature          (1/1)... 
0%
1%
2 features inserted in 161.8 ms

Building final tree feature...

2 features tree built in 1.193 ms
100%
/home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/geojson/sample.geojson imported successfully.
Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test1303282073146751135.gpkg
Fetching table...
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 9.427 sec - in org.locationtech.geogig.geotools.cli.geojson.GeoJsonImportTest

Importing Lines            (1/2)... 
Usage: geogig export [options] <path> <geojson>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false


Exporting from Points to Points... 
33%
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 9.401 sec - in org.locationtech.geogig.geotools.plumbing.ListOpTest
Importing from database database
67%
100%
Points exported successfully to Points
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a feature type': Using URIBuilder DefaultTestRepoURIBuilder

Exporting repository metadata from 'HEAD:Points' (commit 6d2ea69175bf4870685e5882b5922f894be22208)...

Creating audit metadata for table 'Points'
0%
Exporting from Points to Points... 

Exporting from WORK_HEAD:Points to Points... 
33%
33%
Importing from database database
Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 10.145 sec - in org.locationtech.geogig.geotools.plumbing.ExportOpTest

3 features inserted in 115.6 ms

Building final tree Lines...

3 features tree built in 1.380 ms
67%
100%
Points exported successfully to Points

Exporting repository metadata from 'HEAD:Points' (commit e7b7529be7f7bc6773c5cf78aada12051c441da4)...

Creating audit metadata for table 'Points'
67%
100%

Importing Points           (2/2)... 
WORK_HEAD:Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit2773023736574684293/repo-1838217510/TestPoints.geojson
Importing from database database
1%
3 features inserted in 25.95 ms

Building final tree Points...

3 features tree built in 1.187 ms
100%
Import successful.
Importing from database database
Importing from database database

  Scenario: Try exporting from an empty directory                    # ShpExport.feature:6
    Given I am in an empty directory                                 # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "shp export Points Points.shp"            # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should start with "Not in a geogig repository" # DefaultStepDefinitions.the_response_should_start_with(String)

Importing table2           (1/2)... 
0%
Fetching table...
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------

1 features inserted in 28.36 ms

Building final tree table2...

1 features tree built in 935.5 μs

Importing table1           (2/2)... 
Importing from database database

Importing changes to table Points onto feature tree Points...
0%
Importing from database database

Importing table1           (1/1)... 
0%
2 features inserted in 23.79 ms

Building final tree table1...

2 features tree built in 767.3 μs
100%
Import successful.
Importing from database database
Fetching table...

Importing table2           (1/2)... 
Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test2241598797029676777.gpkg
Importing from database database

Importing Points           (1/1)... 
Fetching table...
0%
3 features inserted in 5.133 ms

Building final tree Points...
Fetching table...
Tests run: 8, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.24 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgDescribeTest

3 features tree built in 1.109 ms
100%
Import successful.
Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.161 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgImportTest
Fetching table...
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------
Usage: geogig import [options]
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --all
       Import all tables.
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --database, -D
       The database to connect to. Default: database
       Default: database
    -d, --dest
       Path to import to
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --table, -t
       Table to import.
       Default: <empty string>
    --user, -U
       User name.  Default: oracle
       Default: oracle


Exporting from Points to Points... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit8341850305135742757/repo-1391226126/TestPoints.geojson
Fetching table...
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.17 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleDescribeTest
0%
Fetching table...
Importing from database database
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------
The shapefile 'file://nonexistent.shp' could not be found, skipping...

1 features inserted in 72.85 ms

Importing table4           (1/8)... 

Building final tree table2...

Importing table3           (2/8)... 
Import successful.
Changes committed and merge at 50e4c1f60e3cf7ed1c73335ec1007b210a8b7392

1 features tree built in 24.80 ms
0%
1 features inserted in 5.095 ms

Building final tree table3...

1 features tree built in 935.8 μs

Importing table1           (2/2)... 

Importing table2           (3/8)... 
Fetching feature types...

1 features inserted in 2.210 ms

Building final tree table2...

1 features tree built in 583.2 μs
 - table4
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable

Importing table1           (4/8)... 
0%
2 features inserted in 3.091 ms

Building final tree table1...

2 features tree built in 1.286 ms
Fetching feature types...

Importing shpLikeTable2    (5/8)... 

1 features inserted in 2.324 ms

Building final tree shpLikeTable2...

1 features tree built in 655.8 μs

Importing shpLikeTable     (6/8)... 

Exporting from Points to Points... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit3059290900051916103/repo633548121/TestPoints.geojson

Exporting from Lines to Lines... 
33%
Fetching table...
Lines exported successfully to /opt/public/hipp/ramdisk/geogig/junit3059290900051916103/repo633548121/TestPoints.geojson
Tests run: 6, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.133 sec - in org.locationtech.geogig.geotools.cli.geojson.GeoJsonExportTest
Tests run: 8, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.719 sec - in org.locationtech.geogig.geotools.cli.postgis.PGDescribeTest
Fetching feature types...
 - table4
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable
2017-06-02T11:26:03.297-0400  SEVERE  There's code using JDBC based datastore and not disposing them. This may lead to temporary loss of database connections. Please make sure all data access code calls DataStore.dispose() before freeing all references to it
Fetching feature types...
Importing from database database
1%
Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
1 features inserted in 27.10 ms

Building final tree shpLikeTable...

1 features tree built in 782.7 μs

Importing GeoJsonLikeTa... (7/8)... 
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: postgres
       Default: postgres

Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.895 sec - in org.locationtech.geogig.geotools.cli.postgis.PGListTest

1 features inserted in 1.427 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 419.4 μs
2017-06-02T11:26:03.487-0400  SEVERE  There's code using JDBC based datastore and not disposing them. This may lead to temporary loss of database connections. Please make sure all data access code calls DataStore.dispose() before freeing all references to it

Exporting from Points to Points... 
33%
Fetching feature types...

Importing GeoJsonLikeTable (8/8)... 
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Could not find the specified table.
org.locationtech.geogig.cli.CommandFailedException: Could not find the specified table.
	at org.locationtech.geogig.geotools.cli.DataStoreDescribe.runInternal(DataStoreDescribe.java:68)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)

1 features inserted in 1.365 ms

Building final tree GeoJsonLikeTable...

1 features tree built in 511.6 μs
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)100%
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)100%
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)

	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
Import successful.
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
Importing from database database

Importing table1           (1/1)... 
100%
Points exported successfully to Points
0%
2 features inserted in 2.996 ms

Building final tree table1...

2 features tree built in 721.6 μs
100%
Import successful.

Exporting repository metadata from 'HEAD:Points' (commit 39ccc549c69d9bafdc625ac313910b7bc57c6480)...

Creating audit metadata for table 'Points'
Tests run: 12, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.23 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleImportTest
Importing from database database
Fetching feature types...
Usage: geogig import [options] <shapefile> [<shapefile>]...
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --charset
       Use the specified charset to decode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --create, -c
       Only create the schema, do not actually import its features
       Default: false
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false

Usage: geogig import [options]
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --all
       Import all tables.
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --database, -D
       The database to connect to.  Default: database
       Default: database
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --table, -t
       Table to import.
       Default: <empty string>
    --user, -U
       User name.  Default: postgres
       Default: postgres


Importing changes to table Points onto feature tree Points...
0%
Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Importing table4           (1/8)... 
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: database.gpkg
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    -i, --interchange
       Export as geogig mobile interchange format
       Default: false
    --overwrite, -o
       Overwrite output table
       Default: false
    --user, -U
       User name.  Default: user
       Default: user


Importing table3           (2/8)... 
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try describing a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder
0%
1 features inserted in 3.513 ms

Building final tree table3...

1 features tree built in 729.8 μs

Importing table2           (3/8)... 
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to. Default: database
       Default: database
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: oracle
       Default: oracle

Importing from database database

Importing table4           (1/8)... 
Import successful.
Changes committed and merge at 2868ec778f15d6eb4bfc806aca99646444c499ec
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.523 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleListTest

Importing table3           (2/8)... 

1 features inserted in 3.508 ms

Building final tree table2...

1 features tree built in 6.080 ms
0%
1 features inserted in 2.040 ms

Building final tree table3...

1 features tree built in 799.5 μs

Importing table2           (3/8)... 

Importing table1           (4/8)... 
Fetching feature types...
 - table4
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable

1 features inserted in 1.654 ms

Building final tree table2...

1 features tree built in 615.7 μs

Importing table1           (4/8)... 
0%
2 features inserted in 3.870 ms

Building final tree table1...

2 features tree built in 737.3 μs


Importing shpLikeTable2    (5/8)... 
2 features inserted in 2.103 ms

Building final tree table1...

2 features tree built in 793.9 μs
Fetching feature types...

1 features inserted in 6.731 ms

Building final tree shpLikeTable2...

1 features tree built in 750.0 μs

Importing shpLikeTable     (6/8)... 

Importing shpLikeTable2    (5/8)... 
0%
1 features inserted in 1.933 ms

Building final tree shpLikeTable2...

1 features tree built in 637.3 μs

Importing shpLikeTable     (6/8)... 
1%
1 features inserted in 3.130 ms

Building final tree shpLikeTable...
Fetching feature types...

1 features tree built in 10.85 ms

Importing GeoJsonLikeTa... (7/8)... 

1 features inserted in 1.635 ms

Building final tree shpLikeTable...

1 features tree built in 5.869 ms

Importing GeoJsonLikeTa... (7/8)... 
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: database.gpkg
    --user, -U
       User name.  Default: user
       Default: user

Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.05 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgListTest
1%
1 features inserted in 1.787 ms

Building final tree GeoJsonLikeTable2...
1%
1 features inserted in 2.278 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 988.4 μs

Exporting from Points to Points... 
33%
1 features tree built in 32.88 ms

Importing GeoJsonLikeTable (8/8)... 

Exporting from WORK_HEAD:Points to Points... 
33%
100%
Points exported successfully to Points


Exporting repository metadata from 'HEAD:Points' (commit 3545c46f5bfbbef8275094644684e188c2975cec)...

Creating audit metadata for table 'Points'
Importing GeoJsonLikeTable (8/8)... 
100%
WORK_HEAD:Points exported successfully to Points

1 features inserted in 1.763 ms

Building final tree GeoJsonLikeTable...

1 features tree built in 3.415 ms
100%

1 features inserted in 1.556 ms

Building final tree GeoJsonLikeTable...

1 features tree built in 2.115 ms
/home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp imported successfully.
100%
Import successful.
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

Tests run: 10, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.455 sec - in org.locationtech.geogig.geotools.cli.shp.ShpImportTest
Tests run: 12, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.065 sec - in org.locationtech.geogig.geotools.cli.postgis.PGImportTest

  Scenario: Try describing a GeoPackage table from an empty directory                    # GeoPkgDescribe.feature:6
    Given I am in an empty directory                                                     # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg describe --table test" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."               # DefaultStepDefinitions.the_response_should_contain(String)

Importing changes to table Points onto feature tree Points...
0%
Exporting from WORK_HEAD:Lines to Lines... 
33%
WORK_HEAD:Lines exported successfully to Lines
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.584 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgPullTest
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false


Exporting from Points to Points... 
33%
100%
Points exported successfully to Points

Exporting from WORK_HEAD:Points to testTable... 
33%
100%
WORK_HEAD:Points exported successfully to testTable

Exporting from Lines to testTable... 
33%
Lines exported successfully to testTable
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to describe a GeoPackage table that doesn't exit in the database': Using URIBuilder DefaultTestRepoURIBuilder

Exporting from WORK_HEAD:Points to TestPoints... 

Exporting from WORK_HEAD:Points to testTable... 
33%
33%
100%
WORK_HEAD:Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit6287093605939020123/repo-1176322828/TestPoints.shp

Exporting from Points to Points... 
33%
100%
Points exported successfully to Points
100%
WORK_HEAD:Points exported successfully to testTable

Exporting from Lines to testTable... 
33%
Lines exported successfully to testTable

Exporting from Lines to Points... 
33%
Exporting from Points to Points... 
33%
100%
Points exported successfully to Points
Lines exported successfully to Points
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 16.014 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgExportTest

  Scenario: Try describing a GeoPackage table                                              # GeoPkgDescribe.feature:11
    Given I have a repository                                                              # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg describe --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Table : Points"                                      # DefaultStepDefinitions.the_response_should_contain(String)

Exporting from Points to TestPoints... 
33%
Exporting from Points to Points... 
33%
100%
Points exported successfully to Points
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --overwrite, -o
       Overwrite output table
       Default: false
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: postgres
       Default: postgres

Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 16.193 sec - in org.locationtech.geogig.geotools.cli.postgis.PGExportTest
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Could not find the specified table.
org.locationtech.geogig.cli.CommandFailedException: Could not find the specified table.
	at org.locationtech.geogig.geotools.cli.DataStoreDescribe.runInternal(DataStoreDescribe.java:68)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to. Default: database
       Default: database
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --overwrite, -o
       Overwrite output table
       Default: false
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: oracle
       Default: oracle

Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 16.605 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleExportTest

  Scenario: Try to describe a GeoPackage table that doesn't exit in the database                      # GeoPkgDescribe.feature:16
    Given I have a repository                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg describe --table nonexistant_table" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."                            # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg export" command
    In order to export data to Geogig
    As a Geogig User
    I want to export from the repository into a GeoPackage file
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder

Exporting from Points to TestPoints... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit634097269874351641/repo-1505311030/TestPoints.shp
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a feature type': Using URIBuilder DefaultTestRepoURIBuilder

Exporting from Points to TestPoints... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit5913968850158809527/repo-1078284463/TestPoints.shp

Exporting from Lines to TestPoints... 
33%
Lines exported successfully to /opt/public/hipp/ramdisk/geogig/junit5913968850158809527/repo-1078284463/TestPoints.shp
Tests run: 10, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 17.365 sec - in org.locationtech.geogig.geotools.cli.shp.ShpExportTest

  Scenario: Try exporting from an empty directory                                 # GeoPkgExport.feature:6
    Given I am in an empty directory                                              # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg export Points Points" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository:"             # DefaultStepDefinitions.the_response_should_start_with(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting an inexistent feature type': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting a feature type                                          # ShpExport.feature:11
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                        # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "shp export -o Points Points.shp"                      # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting an inexistent feature type': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting an inexistent feature type                                      # ShpExport.feature:17
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()

  Scenario: Try exporting a feature type                                               # GeoPkgExport.feature:11
    Given I have a repository                                                          # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                             # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export -o Points MyPoints" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    Then the response should contain "Points exported successfully to MyPoints"        # DefaultStepDefinitions.the_response_should_contain(String)
    When I run the command "shp export WRONGTABLE Points.shp"                             # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "pathspec 'WRONGTABLE' did not match any valid path" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types using the default feature type': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting to a table that already exists': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting with mixed feature types                                                    # ShpExport.feature:23
    Given I have a repository                                                                         # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                                        # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o Points Points.shp"                                          # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "The selected tree contains mixed feature types"                 # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Use --defaulttype or --featuretype <feature_type_ref> to export" # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting an inexistent feature type                                      # GeoPkgExport.feature:17
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export WRONGTABLE Points" on a new GeoPackage file     # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "pathspec 'WRONGTABLE' did not match any valid path" # DefaultStepDefinitions.the_response_should_contain(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - The selected table already exists. Use -o to overwrite
org.locationtech.geogig.cli.CommandFailedException: The selected table already exists. Use -o to overwrite
	at org.locationtech.geogig.geotools.cli.DataStoreExport.exportInternal(DataStoreExport.java:134)
	at org.locationtech.geogig.geotools.cli.DataStoreExport.runInternal(DataStoreExport.java:99)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgExport.runInternal(GeopkgExport.java:75)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a table from HEAD': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types using --alter': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting to a table that already exists                                      # GeoPkgExport.feature:23
    Given I have a repository                                                                 # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                    # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export Points Points" on an existing GeoPackage file       # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "The selected table already exists. Use -o to overwrite" # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting with mixed feature types using the default feature type # ShpExport.feature:30
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                    # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o --defaulttype Points Points.shp"        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting a table from HEAD                                                       # GeoPkgExport.feature:29
    Given I have a repository                                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                        # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "commit -m TestCommit"                                                 # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "geopkg export -o HEAD:Points CommitedPoints" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "Points exported successfully to CommitedPoints"             # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg import" command
    In order to import data to Geogig
    As a Geogig User
    I want to import one or more tables from a GeoPackage file
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try importing into an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a table from HEAD': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting with mixed feature types using --alter                  # ShpExport.feature:36
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                    # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o --defaulttype Points Points.shp"        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try importing into an empty directory                                        # GeoPkgImport.feature:6
    Given I am in an empty directory                                                     # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg import --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"                     # DefaultStepDefinitions.the_response_should_start_with(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a full GeoPackage file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a GeoPackage table                                             # GeoPkgImport.feature:11
    Given I have a repository                                                            # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Import successful."                                # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting a table from HEAD                                               # ShpExport.feature:42
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "commit -m TestCommit"                                         # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "shp export -o HEAD:Points CommitedPoints.shp"                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to CommitedPoints.shp" # DefaultStepDefinitions.the_response_should_contain(String)

7 Scenarios (7 passed)
29 Steps (29 passed)
0m21.907s

Tests run: 36, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 24.186 sec - in org.locationtech.geogig.geotools.cli.shp.RunShpFunctionalTest
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a GeoPackage table that doesn't exit in the file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a full GeoPackage file                                # GeoPkgImport.feature:16
    Given I have a repository                                                   # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --all" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Import successful."                       # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import without specifying table or -all': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a GeoPackage table that doesn't exit in the file                          # GeoPkgImport.feature:21
    Given I have a repository                                                                       # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table nonexistant_table" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."                          # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import with table and -all': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import without specifying table or -all                                               # GeoPkgImport.feature:26
    Given I have a repository                                                                            # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import" on an existing GeoPackage file                                # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "No tables specified for import. Specify --all or --table <table>." # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try to import with table and -all                                                  # GeoPkgImport.feature:31
    Given I have a repository                                                                  # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table Points --all" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Specify --all or --table <table>, both cannot be set."   # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg list" command
    In order to know all of the features available in a GeoPackage file
    As a Geogig User
    I want to list all of the features
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try listing from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try listing from a valid directory': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try listing from an empty directory                         # GeoPkgList.feature:6
    Given I am in an empty directory                                    # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg list" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"    # DefaultStepDefinitions.the_response_should_start_with(String)

  Scenario: Try listing from a valid directory                          # GeoPkgList.feature:11
    Given I have a repository                                           # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg list" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Points"                           # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg pull" command
    In order to import data to Geogig
    As a Geogig User
    I want to import one or more tables from a GeoPackage file with the interchange format
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try pulling into an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table without commit message': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try pulling into an empty directory                                        # GeoPkgPull.feature:6
    Given I am in an empty directory                                                   # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg pull --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"                   # DefaultStepDefinitions.the_response_should_start_with(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Commit message not provided
java.lang.IllegalArgumentException: Commit message not provided
	at com.google.common.base.Preconditions.checkArgument(Preconditions.java:122)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:64)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(GeoPkgStepDefinitions.java:116)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table without commit message                                  # GeoPkgPull.feature:11
    Given I have a repository                                                                      # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Commit message not provided"                                 # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table that doesn't exit in the file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table                                                                            # GeoPkgPull.feature:16
    Given I have a repository                                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Import successful."                                                             # DefaultStepDefinitions.the_response_should_contain(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Unable to import: No table to import.
java.lang.IllegalStateException: No table to import.
	at com.google.common.base.Preconditions.checkState(Preconditions.java:173)
	at org.locationtech.geogig.geotools.geopkg.InterchangeFormat.importAuditLog(InterchangeFormat.java:270)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:81)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(GeoPkgStepDefinitions.java:116)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull without specifying table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table that doesn't exit in the file                                                         # GeoPkgPull.feature:21
    Given I have a repository                                                                                                    # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table nonexistant_table --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Unable to import: No table to import."                                                     # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table with a conflict': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull without specifying table                                                       # GeoPkgPull.feature:26
    Given I have a repository                                                                          # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Import successful."                                              # DefaultStepDefinitions.the_response_should_contain(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - CONFLICT: Merge conflict in Points/Points.1
Automatic merge failed. Fix conflicts and then commit the result.

org.locationtech.geogig.geotools.geopkg.GeopkgMergeConflictsException: CONFLICT: Merge conflict in Points/Points.1
Automatic merge failed. Fix conflicts and then commit the result.

	at org.locationtech.geogig.geotools.geopkg.InterchangeFormat.importAuditLog(InterchangeFormat.java:342)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:81)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file_with_conflict(GeoPkgStepDefinitions.java:157)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)

  Scenario: Try to pull a GeoPackage table with a conflict                                                                            # GeoPkgPull.feature:31
    Given I have a repository                                                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points --message imported" on an existing interchange GeoPackage file with a conflict # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file_with_conflict(String)
    Then the response should contain "CONFLICT: Merge conflict in"                                                                    # DefaultStepDefinitions.the_response_should_contain(String)

22 Scenarios (22 passed)
71 Steps (71 passed)
0m27.468s

Tests run: 93, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 29.851 sec - in org.locationtech.geogig.geotools.cli.geopkg.RunGeoPkgFunctionalTest
[main] WARN org.locationtech.geogig.geotools.plumbing.ImportOp - Error looking for known identifier for CRS null
org.locationtech.geogig.porcelain.CRSException: Could not find identifier associated with the defined CRS: 
GEOGCS["GCS_WGS_1985", 
  DATUM["D_WGS_1985", 
    SPHEROID["WGS_1985", 6378137.0, 298.257223563]], 
  PRIMEM["Greenwich", 0.0], 
  UNIT["degree", 0.017453292519943295], 
  AXIS["Longitude", EAST], 
  AXIS["Latitude", NORTH]]
	at org.locationtech.geogig.repository.impl.SpatialOps.findKnownCrs(SpatialOps.java:218)
	at org.locationtech.geogig.repository.impl.SpatialOps.findIdentifier(SpatialOps.java:202)
	at org.locationtech.geogig.geotools.plumbing.ImportOp.tryForceKnownCRS(ImportOp.java:281)
	at org.locationtech.geogig.geotools.plumbing.ImportOp._call(ImportOp.java:221)
	at org.locationtech.geogig.geotools.plumbing.ImportOp._call(ImportOp.java:87)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.plumbing.ImportOpTest.testForcedKnownCrsIdentifierNoMatch(ImportOpTest.java:479)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
	at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
	at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
	at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:17)
	at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:26)
	at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:27)
	at org.junit.rules.ExpectedException$ExpectedExceptionStatement.evaluate(ExpectedException.java:239)
	at org.junit.rules.ExternalResource$1.evaluate(ExternalResource.java:48)
	at org.junit.rules.RunRules.evaluate(RunRules.java:20)
	at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:325)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:78)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:57)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
Tests run: 24, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 30.097 sec - in org.locationtech.geogig.geotools.plumbing.ImportOpTest

Results :

Tests run: 316, Failures: 0, Errors: 0, Skipped: 0

[JENKINS] Recording test results
[INFO] 
[INFO] --- maven-jar-plugin:2.4:jar (default-jar) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT.jar
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-tests.jar
[INFO] 
[INFO] >>> maven-source-plugin:2.2.1:jar (attach-sources) > generate-sources @ geogig-geotools >>>
[INFO] 
[INFO] --- git-commit-id-plugin:2.1.8:revision (default) @ geogig-geotools ---
[WARNING] Failed to getClass for org.apache.maven.plugin.source.SourceJarMojo
[INFO] 
[INFO] <<< maven-source-plugin:2.2.1:jar (attach-sources) < generate-sources @ geogig-geotools <<<
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar (attach-sources) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-sources.jar
[INFO] 
[INFO] >>> maven-source-plugin:2.2.1:test-jar (attach-sources) > generate-sources @ geogig-geotools >>>
[INFO] 
[INFO] --- git-commit-id-plugin:2.1.8:revision (default) @ geogig-geotools ---
[WARNING] Failed to getClass for org.apache.maven.plugin.source.TestSourceJarMojo
[INFO] 
[INFO] <<< maven-source-plugin:2.2.1:test-jar (attach-sources) < generate-sources @ geogig-geotools <<<
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:test-jar (attach-sources) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-test-sources.jar
[INFO] 
[INFO] --- maven-install-plugin:2.4:install (default-install) @ geogig-geotools ---
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/pom.xml to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT.pom
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-tests.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-tests.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-sources.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-sources.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-test-sources.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-test-sources.jar
[JENKINS] Archiving disabled