SuccessConsole Output

Started calculate disk usage of build
Finished Calculation of disk usage of build in 0 seconds
Started calculate disk usage of workspace
Finished Calculation of disk usage of workspace in 0 seconds
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building GeoTools Extension 1.1-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] 
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ geogig-geotools ---
[INFO] Deleting /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target
[INFO] 
[INFO] --- git-commit-id-plugin:2.1.8:revision (default) @ geogig-geotools ---
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ geogig-geotools ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 2 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ geogig-geotools ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 62 source files to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/classes
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java uses unchecked or unsafe operations.
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java: Recompile with -Xlint:unchecked for details.
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ geogig-geotools ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 14 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ geogig-geotools ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 33 source files to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/test/java/org/locationtech/geogig/geotools/test/storage/MemoryDataStoreWithProvidedFIDSupport.java: Some input files use unchecked or unsafe operations.
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/test/java/org/locationtech/geogig/geotools/test/storage/MemoryDataStoreWithProvidedFIDSupport.java: Recompile with -Xlint:unchecked for details.
[INFO] 
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ geogig-geotools ---
[INFO] Surefire report directory: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/surefire-reports

-------------------------------------------------------
 T E S T S
-------------------------------------------------------

-------------------------------------------------------
 T E S T S
-------------------------------------------------------
Running org.locationtech.geogig.geotools.cli.geojson.GeoJsonImportTest
Running org.locationtech.geogig.geotools.cli.geojson.GeoJsonExportTest
Running org.locationtech.geogig.geotools.cli.shp.ShpImportTest
Running org.locationtech.geogig.geotools.cli.shp.RunShpFunctionalTest
Running org.locationtech.geogig.geotools.cli.shp.ShpExportTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgDescribeTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgPullTest
Running org.locationtech.geogig.geotools.cli.geopkg.RunGeoPkgFunctionalTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgImportTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgListTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgExportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleListTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleImportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleExportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleDescribeTest
Running org.locationtech.geogig.geotools.cli.postgis.PGImportTest
Running org.locationtech.geogig.geotools.cli.postgis.PGDescribeTest
Running org.locationtech.geogig.geotools.cli.postgis.PGExportTest
Running org.locationtech.geogig.geotools.cli.postgis.PGListTest
Running org.locationtech.geogig.geotools.plumbing.ExportOpTest
Running org.locationtech.geogig.geotools.plumbing.ImportOpTest
Running org.locationtech.geogig.geotools.plumbing.ExportDiffOpTest
Running org.locationtech.geogig.geotools.plumbing.DescribeOpTest
Running org.locationtech.geogig.geotools.plumbing.ListOpTest
Feature: "shp export" command
    In order to export data to Geogig
    As a Geogig User
    I want to export from the repository to a shapefile
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
Feature: "geopkg describe" command
    In order to understand the structure of a table in a GeoPackage file
    As a Geogig User
    I want Geogig to describe the table
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try describing a GeoPackage table from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
Usage: geogig describe [options]
  Options:
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test2340592334115187044.gpkg
  * --table, -t
       Table to describe.
       Default: <empty string>
    --user, -U
       User name.  Default: user
       Default: user

The GeoJSON file 'file://nonexistent.geojson' could not be found, skipping...
Usage: geogig import [options] <geojson> [<geojson>]...
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --geom-name
       Name to use for geometry attribute, replacing the default one
       ('geometry')
    --geom-name-auto
       Uses the name of the geometry descriptor in the destination feature type
       Default: false

Usage: geogig describe [options]
  Options:
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
  * --table, -t
       Table to describe.
       Default: <empty string>
    --user, -U
       User name.  Default: postgres
       Default: postgres

Importing from GeoJSON /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/geojson/sample.geojson
The shapefile '/home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp' could not be found, skipping...

Importing feature          (1/1)... 
Importing from database database
Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Importing table2           (1/2)... 
0%
Importing from database database

2 features inserted in 32.48 ms

Building final tree feature...

2 features tree built in 10.84 ms
100%
/home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/geojson/sample.geojson imported successfully.
Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 7.532 sec - in org.locationtech.geogig.geotools.plumbing.ExportDiffOpTest
Running org.locationtech.geogig.geotools.plumbing.FeatureTypeAdapterFeatureSourceTest
Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.053 sec - in org.locationtech.geogig.geotools.plumbing.FeatureTypeAdapterFeatureSourceTest
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 7.972 sec - in org.locationtech.geogig.geotools.cli.geojson.GeoJsonImportTest
0%
Usage: geogig export [options] <path> <geojson>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

1 features inserted in 32.43 ms

Building final tree table2...

1 features tree built in 945.1 μs

Importing table1           (2/2)... 

Exporting from WORK_HEAD:Points to Points... 
33%
Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test5388307388808105706.gpkg

Importing Lines            (1/2)... 
100%
WORK_HEAD:Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit1132222831893003348/repo-1786046372/TestPoints.geojson
0%
Exporting from Points to Points... 
33%
3 features inserted in 63.36 ms

Building final tree Lines...

3 features tree built in 4.667 ms

Importing Points           (2/2)... 
100%
Points exported successfully to Points

Exporting repository metadata from 'HEAD:Points' (commit 4ff2e6c6cc81fb044a66206ac4827897aa8a83bc)...

Creating audit metadata for table 'Points'
1%
3 features inserted in 5.468 ms

Building final tree Points...

3 features tree built in 50.35 ms
100%
Import successful.

Exporting from Points to Points... 
33%
Exporting from Points to Points... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit1139597093881362023/repo-373847369/TestPoints.geojson
67%
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 9.663 sec - in org.locationtech.geogig.geotools.plumbing.ListOpTest
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 9.718 sec - in org.locationtech.geogig.geotools.plumbing.DescribeOpTest
100%
Points exported successfully to Points
Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 9.878 sec - in org.locationtech.geogig.geotools.plumbing.ExportOpTest

Exporting repository metadata from 'HEAD:Points' (commit 429e8f71bb9a1ea9dd7e49c35f3ae0dd1a143151)...

Creating audit metadata for table 'Points'

Exporting from Points to Points... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit3224321381837858331/repo-1243415997/TestPoints.geojson

Exporting from Lines to Lines... 
33%
Lines exported successfully to /opt/public/hipp/ramdisk/geogig/junit3224321381837858331/repo-1243415997/TestPoints.geojson
Tests run: 6, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 10.374 sec - in org.locationtech.geogig.geotools.cli.geojson.GeoJsonExportTest
Fetching table...
Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test3449902013901600640.gpkg

Importing Points           (1/1)... 
0%
3 features inserted in 5.611 ms

Building final tree Points...

3 features tree built in 25.81 ms
100%
Import successful.
Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 10.681 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgImportTest
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a feature type': Using URIBuilder DefaultTestRepoURIBuilder
Fetching table...

Importing changes to table Points onto feature tree Points...
0%
Importing from database database
The shapefile 'file://nonexistent.shp' could not be found, skipping...
Fetching table...
Importing from database database
Importing from database database
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------
Importing from database database
Fetching feature types...
 - table4
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: database.gpkg
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    -i, --interchange
       Export as geogig mobile interchange format
       Default: false
    --overwrite, -o
       Overwrite output table
       Default: false
    --user, -U
       User name.  Default: user
       Default: user

Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Fetching table...
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 11.824 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleDescribeTest
Fetching feature types...

  Scenario: Try exporting from an empty directory                    # ShpExport.feature:6
    Given I am in an empty directory                                 # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "shp export Points Points.shp"            # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should start with "Not in a geogig repository" # DefaultStepDefinitions.the_response_should_start_with(String)
Fetching feature types...
Fetching table...
Import successful.
Changes committed and merge at 69ab6c5f54292e900e267fdf4f5a36ceece15885
Fetching feature types...
 - table4
Fetching table...
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable
Usage: geogig import [options] <shapefile> [<shapefile>]...
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --charset
       Use the specified charset to decode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --create, -c
       Only create the schema, do not actually import its features
       Default: false
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false

Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to. Default: database
       Default: database
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: oracle
       Default: oracle

Importing from database database

Exporting from WORK_HEAD:Points to Points... 
33%
100%
WORK_HEAD:Points exported successfully to Points
Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Importing table4           (1/8)... 
Fetching table...
Fetching feature types...

Importing table3           (2/8)... 
0%

1 features inserted in 3.409 ms
Importing table2           (1/2)... 

Building final tree table3...

1 features tree built in 1.042 ms

Importing table2           (3/8)... 

1 features inserted in 2.514 ms

Building final tree table2...

1 features tree built in 759.5 μs

Exporting from WORK_HEAD:Lines to Lines... 
33%
Fetching feature types...

Importing table1           (4/8)... 
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.244 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleListTest
Tests run: 8, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.33 sec - in org.locationtech.geogig.geotools.cli.postgis.PGDescribeTest
Fetching table...
Table : table1
WORK_HEAD:Lines exported successfully to Lines
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------
0%
2 features inserted in 15.84 ms

Building final tree table1...

2 features tree built in 654.7 μs
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: postgres
       Default: postgres

Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.633 sec - in org.locationtech.geogig.geotools.cli.postgis.PGListTest

Importing shpLikeTable2    (5/8)... 

Importing from database database
Exporting from Points to Points... 
33%
100%
Points exported successfully to Points

1 features inserted in 3.067 ms


Importing table2           (1/2)... 
Building final tree shpLikeTable2...

1 features tree built in 653.8 μs

Exporting repository metadata from 'HEAD:Points' (commit b70778527a0e28102c3a8c422e2474dbe4e20ea3)...

Creating audit metadata for table 'Points'
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Could not find the specified table.
org.locationtech.geogig.cli.CommandFailedException: Could not find the specified table.
	at org.locationtech.geogig.geotools.cli.DataStoreDescribe.runInternal(DataStoreDescribe.java:68)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)

Importing shpLikeTable     (6/8)... 
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
1%
1 features inserted in 3.342 ms

Building final tree shpLikeTable...

1 features tree built in 670.4 μs
0%
Importing GeoJsonLikeTa... (7/8)... 

1 features inserted in 38.84 ms

Building final tree table2...

1 features tree built in 1.062 ms

Importing changes to table Points onto feature tree Points...
0%
Importing table1           (2/2)... 
Importing from database database
1%
1 features inserted in 8.543 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 589.1 μs
Fetching table...
Importing from database database

Importing table1           (1/1)... 
Import successful.
Changes committed and merge at 8a19554b5d3b1c35f2fa4f2900af52c89ce11c46
0%
2 features inserted in 4.357 ms

Building final tree table1...
Tests run: 8, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.305 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgDescribeTest
0%
2 features tree built in 928.2 μs
100%
Import successful.

1 features inserted in 28.32 ms

Building final tree table2...

1 features tree built in 5.704 ms

Importing table1           (2/2)... 

Importing GeoJsonLikeTable (8/8)... 
Importing from database database
Fetching feature types...
 - table4
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try describing a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder
1%
1 features inserted in 1.766 ms

Building final tree GeoJsonLikeTable...

1 features tree built in 651.7 μs
Fetching feature types...
100%
/home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp imported successfully.
Importing from database database
Fetching feature types...
Usage: geogig import [options]
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --all
       Import all tables.
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --database, -D
       The database to connect to. Default: database
       Default: database
    -d, --dest
       Path to import to
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --table, -t
       Table to import.
       Default: <empty string>
    --user, -U
       User name.  Default: oracle
       Default: oracle

Tests run: 10, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.695 sec - in org.locationtech.geogig.geotools.cli.shp.ShpImportTest

Exporting from Points to Points... 
Importing from database database

Importing table1           (1/1)... 
33%
100%
Points exported successfully to Points

0%
2 features inserted in 3.823 ms
Exporting repository metadata from 'HEAD:Points' (commit 49f4f540e6587ef15c1e84949f3b479c70d09ea6)...

Building final tree table1...

2 features tree built in 2.862 ms

Creating audit metadata for table 'Points'
100%
Import successful.
Importing from database database
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: database.gpkg
    --user, -U
       User name.  Default: user
       Default: user


Importing table4           (1/8)... 
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.597 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgListTest

Importing table3           (2/8)... 
Importing from database database
0%
1 features inserted in 3.072 ms

Building final tree table3...

1 features tree built in 869.8 μs

Importing table2           (3/8)... 

1 features inserted in 1.850 ms

Building final tree table2...

1 features tree built in 4.300 ms

Importing table1           (4/8)... 

Importing changes to table Points onto feature tree Points...
0%
Usage: geogig import [options]
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --all
       Import all tables.
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --database, -D
       The database to connect to.  Default: database
       Default: database
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --table, -t
       Table to import.
       Default: <empty string>
    --user, -U
       User name.  Default: postgres
       Default: postgres


2 features inserted in 2.960 ms

Building final tree table1...

2 features tree built in 740.5 μs
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false


Importing shpLikeTable2    (5/8)... 
Importing from database database

Importing table4           (1/8)... 

Importing table3           (2/8)... 
0%
1 features inserted in 3.761 ms

Building final tree table3...

1 features tree built in 3.877 ms
0%
  Scenario: Try describing a GeoPackage table from an empty directory                    # GeoPkgDescribe.feature:6
    Given I am in an empty directory                                                     # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg describe --table test" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."               # DefaultStepDefinitions.the_response_should_contain(String)

1 features inserted in 19.81 ms

Importing table2           (3/8)... 

Building final tree shpLikeTable2...

1 features tree built in 1.681 ms

Importing shpLikeTable     (6/8)... 

1 features inserted in 2.762 ms

Building final tree table2...

1 features tree built in 5.984 ms

Importing table1           (4/8)... 
0%
2 features inserted in 2.832 ms

Building final tree table1...
2017-06-01T12:38:43.170-0400  SEVERE  There's code using JDBC based datastore and not disposing them. This may lead to temporary loss of database connections. Please make sure all data access code calls DataStore.dispose() before freeing all references to it

2 features tree built in 14.48 ms
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.079 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgPullTest
1%
1 features inserted in 2.398 ms

Building final tree shpLikeTable...

Importing shpLikeTable2    (5/8)... 

1 features tree built in 1.311 ms

Importing GeoJsonLikeTa... (7/8)... 

1 features inserted in 3.228 ms

Building final tree shpLikeTable2...

1 features tree built in 727.5 μs

1 features inserted in 3.206 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 4.504 ms

Importing shpLikeTable     (6/8)... 

Importing GeoJsonLikeTable (8/8)... 

1 features inserted in 1.712 ms

Building final tree GeoJsonLikeTable...

1 features tree built in 515.1 μs
100%
Import successful.
1%
1 features inserted in 1.601 ms

Building final tree shpLikeTable...

Exporting from Points to Points... 
33%
100%
Points exported successfully to Points
2017-06-01T12:38:43.365-0400  SEVERE  There's code using JDBC based datastore and not disposing them. This may lead to temporary loss of database connections. Please make sure all data access code calls DataStore.dispose() before freeing all references to it

1 features tree built in 41.34 ms
Tests run: 12, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.193 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleImportTest

Importing GeoJsonLikeTa... (7/8)... 
1%
1 features inserted in 1.634 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 1.855 ms

Importing GeoJsonLikeTable (8/8)... 

1 features inserted in 1.759 ms

Building final tree GeoJsonLikeTable...

1 features tree built in 670.5 μs
100%
Import successful.
Tests run: 12, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.4 sec - in org.locationtech.geogig.geotools.cli.postgis.PGImportTest

Exporting from WORK_HEAD:Points to testTable... 

Exporting from Points to Points... 
33%
33%
100%
Points exported successfully to Points
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false


Exporting from WORK_HEAD:Points to testTable... 

Exporting from Lines to Points... 
33%
33%
Lines exported successfully to Points
100%
WORK_HEAD:Points exported successfully to testTable

Exporting from Lines to testTable... 
33%
Lines exported successfully to testTable
100%
WORK_HEAD:Points exported successfully to testTable

Exporting from Lines to testTable... 
33%
Lines exported successfully to testTable
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.757 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgExportTest

Exporting from Points to Points... 
33%
100%
Points exported successfully to Points

Exporting from Points to Points... 
33%
100%
Points exported successfully to Points
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to describe a GeoPackage table that doesn't exit in the database': Using URIBuilder DefaultTestRepoURIBuilder
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --overwrite, -o
       Overwrite output table
       Default: false
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: postgres
       Default: postgres

Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 15.027 sec - in org.locationtech.geogig.geotools.cli.postgis.PGExportTest

Exporting from WORK_HEAD:Points to TestPoints... 
33%
  Scenario: Try describing a GeoPackage table                                              # GeoPkgDescribe.feature:11
    Given I have a repository                                                              # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg describe --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Table : Points"                                      # DefaultStepDefinitions.the_response_should_contain(String)
100%
WORK_HEAD:Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit4507633152029541391/repo1364114980/TestPoints.shp
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to. Default: database
       Default: database
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --overwrite, -o
       Overwrite output table
       Default: false
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: oracle
       Default: oracle

Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 15.391 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleExportTest

Exporting from Points to TestPoints... 
33%
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Could not find the specified table.
org.locationtech.geogig.cli.CommandFailedException: Could not find the specified table.
	at org.locationtech.geogig.geotools.cli.DataStoreDescribe.runInternal(DataStoreDescribe.java:68)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)

  Scenario: Try to describe a GeoPackage table that doesn't exit in the database                      # GeoPkgDescribe.feature:16
    Given I have a repository                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg describe --table nonexistant_table" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."                            # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg export" command
    In order to export data to Geogig
    As a Geogig User
    I want to export from the repository into a GeoPackage file
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false


Exporting from Points to TestPoints... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit5491074457050823283/repo430645690/TestPoints.shp
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a feature type': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting an inexistent feature type': Using URIBuilder DefaultTestRepoURIBuilder

Exporting from Points to TestPoints... 
33%
  Scenario: Try exporting from an empty directory                                 # GeoPkgExport.feature:6
    Given I am in an empty directory                                              # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg export Points Points" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository:"             # DefaultStepDefinitions.the_response_should_start_with(String)
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit2751788687460208374/repo836001757/TestPoints.shp

Exporting from Lines to TestPoints... 
33%
Lines exported successfully to /opt/public/hipp/ramdisk/geogig/junit2751788687460208374/repo836001757/TestPoints.shp
Tests run: 10, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 16.299 sec - in org.locationtech.geogig.geotools.cli.shp.ShpExportTest

  Scenario: Try exporting a feature type                                          # ShpExport.feature:11
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                        # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "shp export -o Points Points.shp"                      # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting an inexistent feature type                                      # ShpExport.feature:17
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "shp export WRONGTABLE Points.shp"                             # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "pathspec 'WRONGTABLE' did not match any valid path" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting an inexistent feature type': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting a feature type                                               # GeoPkgExport.feature:11
    Given I have a repository                                                          # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                             # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export -o Points MyPoints" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "Points exported successfully to MyPoints"        # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types using the default feature type': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting with mixed feature types                                                    # ShpExport.feature:23
    Given I have a repository                                                                         # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                                        # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o Points Points.shp"                                          # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "The selected tree contains mixed feature types"                 # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Use --defaulttype or --featuretype <feature_type_ref> to export" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting to a table that already exists': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting an inexistent feature type                                      # GeoPkgExport.feature:17
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export WRONGTABLE Points" on a new GeoPackage file     # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "pathspec 'WRONGTABLE' did not match any valid path" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types using --alter': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting with mixed feature types using the default feature type # ShpExport.feature:30
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                    # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o --defaulttype Points Points.shp"        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - The selected table already exists. Use -o to overwrite
org.locationtech.geogig.cli.CommandFailedException: The selected table already exists. Use -o to overwrite
	at org.locationtech.geogig.geotools.cli.DataStoreExport.exportInternal(DataStoreExport.java:134)
	at org.locationtech.geogig.geotools.cli.DataStoreExport.runInternal(DataStoreExport.java:99)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgExport.runInternal(GeopkgExport.java:75)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a table from HEAD': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting to a table that already exists                                      # GeoPkgExport.feature:23
    Given I have a repository                                                                 # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                    # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export Points Points" on an existing GeoPackage file       # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "The selected table already exists. Use -o to overwrite" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a table from HEAD': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting with mixed feature types using --alter                  # ShpExport.feature:36
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                    # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o --defaulttype Points Points.shp"        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting a table from HEAD                                                       # GeoPkgExport.feature:29
    Given I have a repository                                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                        # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "commit -m TestCommit"                                                 # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "geopkg export -o HEAD:Points CommitedPoints" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "Points exported successfully to CommitedPoints"             # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg import" command
    In order to import data to Geogig
    As a Geogig User
    I want to import one or more tables from a GeoPackage file
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try importing into an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try importing into an empty directory                                        # GeoPkgImport.feature:6
    Given I am in an empty directory                                                     # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg import --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"                     # DefaultStepDefinitions.the_response_should_start_with(String)

  Scenario: Try exporting a table from HEAD                                               # ShpExport.feature:42
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "commit -m TestCommit"                                         # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "shp export -o HEAD:Points CommitedPoints.shp"                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to CommitedPoints.shp" # DefaultStepDefinitions.the_response_should_contain(String)

7 Scenarios (7 passed)
29 Steps (29 passed)
0m18.592s

Tests run: 36, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 20.679 sec - in org.locationtech.geogig.geotools.cli.shp.RunShpFunctionalTest
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a full GeoPackage file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a GeoPackage table                                             # GeoPkgImport.feature:11
    Given I have a repository                                                            # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Import successful."                                # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a GeoPackage table that doesn't exit in the file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a full GeoPackage file                                # GeoPkgImport.feature:16
    Given I have a repository                                                   # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --all" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Import successful."                       # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import without specifying table or -all': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a GeoPackage table that doesn't exit in the file                          # GeoPkgImport.feature:21
    Given I have a repository                                                                       # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table nonexistant_table" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."                          # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import with table and -all': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import without specifying table or -all                                               # GeoPkgImport.feature:26
    Given I have a repository                                                                            # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import" on an existing GeoPackage file                                # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "No tables specified for import. Specify --all or --table <table>." # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try to import with table and -all                                                  # GeoPkgImport.feature:31
    Given I have a repository                                                                  # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table Points --all" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Specify --all or --table <table>, both cannot be set."   # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg list" command
    In order to know all of the features available in a GeoPackage file
    As a Geogig User
    I want to list all of the features
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try listing from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try listing from a valid directory': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try listing from an empty directory                         # GeoPkgList.feature:6
    Given I am in an empty directory                                    # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg list" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"    # DefaultStepDefinitions.the_response_should_start_with(String)

  Scenario: Try listing from a valid directory                          # GeoPkgList.feature:11
    Given I have a repository                                           # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg list" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Points"                           # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg pull" command
    In order to import data to Geogig
    As a Geogig User
    I want to import one or more tables from a GeoPackage file with the interchange format
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try pulling into an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table without commit message': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try pulling into an empty directory                                        # GeoPkgPull.feature:6
    Given I am in an empty directory                                                   # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg pull --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"                   # DefaultStepDefinitions.the_response_should_start_with(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Commit message not provided
java.lang.IllegalArgumentException: Commit message not provided
	at com.google.common.base.Preconditions.checkArgument(Preconditions.java:122)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:64)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(GeoPkgStepDefinitions.java:116)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table without commit message                                  # GeoPkgPull.feature:11
    Given I have a repository                                                                      # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Commit message not provided"                                 # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table that doesn't exit in the file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table                                                                            # GeoPkgPull.feature:16
    Given I have a repository                                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Import successful."                                                             # DefaultStepDefinitions.the_response_should_contain(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Unable to import: No table to import.
java.lang.IllegalStateException: No table to import.
	at com.google.common.base.Preconditions.checkState(Preconditions.java:173)
	at org.locationtech.geogig.geotools.geopkg.InterchangeFormat.importAuditLog(InterchangeFormat.java:270)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:81)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(GeoPkgStepDefinitions.java:116)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull without specifying table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table that doesn't exit in the file                                                         # GeoPkgPull.feature:21
    Given I have a repository                                                                                                    # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table nonexistant_table --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Unable to import: No table to import."                                                     # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table with a conflict': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull without specifying table                                                       # GeoPkgPull.feature:26
    Given I have a repository                                                                          # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Import successful."                                              # DefaultStepDefinitions.the_response_should_contain(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - CONFLICT: Merge conflict in Points/Points.1
Automatic merge failed. Fix conflicts and then commit the result.

org.locationtech.geogig.geotools.geopkg.GeopkgMergeConflictsException: CONFLICT: Merge conflict in Points/Points.1
Automatic merge failed. Fix conflicts and then commit the result.

	at org.locationtech.geogig.geotools.geopkg.InterchangeFormat.importAuditLog(InterchangeFormat.java:342)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:81)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file_with_conflict(GeoPkgStepDefinitions.java:157)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)

  Scenario: Try to pull a GeoPackage table with a conflict                                                                            # GeoPkgPull.feature:31
    Given I have a repository                                                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points --message imported" on an existing interchange GeoPackage file with a conflict # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file_with_conflict(String)
    Then the response should contain "CONFLICT: Merge conflict in"                                                                    # DefaultStepDefinitions.the_response_should_contain(String)

22 Scenarios (22 passed)
71 Steps (71 passed)
0m23.407s

Tests run: 93, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 25.714 sec - in org.locationtech.geogig.geotools.cli.geopkg.RunGeoPkgFunctionalTest
[main] WARN org.locationtech.geogig.geotools.plumbing.ImportOp - Error looking for known identifier for CRS null
org.locationtech.geogig.porcelain.CRSException: Could not find identifier associated with the defined CRS: 
GEOGCS["GCS_WGS_1985", 
  DATUM["D_WGS_1985", 
    SPHEROID["WGS_1985", 6378137.0, 298.257223563]], 
  PRIMEM["Greenwich", 0.0], 
  UNIT["degree", 0.017453292519943295], 
  AXIS["Longitude", EAST], 
  AXIS["Latitude", NORTH]]
	at org.locationtech.geogig.repository.impl.SpatialOps.findKnownCrs(SpatialOps.java:218)
	at org.locationtech.geogig.repository.impl.SpatialOps.findIdentifier(SpatialOps.java:202)
	at org.locationtech.geogig.geotools.plumbing.ImportOp.tryForceKnownCRS(ImportOp.java:281)
	at org.locationtech.geogig.geotools.plumbing.ImportOp._call(ImportOp.java:221)
	at org.locationtech.geogig.geotools.plumbing.ImportOp._call(ImportOp.java:87)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.plumbing.ImportOpTest.testForcedKnownCrsIdentifierNoMatch(ImportOpTest.java:479)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
	at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
	at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
	at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:17)
	at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:26)
	at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:27)
	at org.junit.rules.ExpectedException$ExpectedExceptionStatement.evaluate(ExpectedException.java:239)
	at org.junit.rules.ExternalResource$1.evaluate(ExternalResource.java:48)
	at org.junit.rules.RunRules.evaluate(RunRules.java:20)
	at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:325)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:78)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:57)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
Tests run: 24, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 26.177 sec - in org.locationtech.geogig.geotools.plumbing.ImportOpTest

Results :

Tests run: 316, Failures: 0, Errors: 0, Skipped: 0

[JENKINS] Recording test results
[INFO] 
[INFO] --- maven-jar-plugin:2.4:jar (default-jar) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT.jar
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-tests.jar
[INFO] 
[INFO] >>> maven-source-plugin:2.2.1:jar (attach-sources) > generate-sources @ geogig-geotools >>>
[INFO] 
[INFO] --- git-commit-id-plugin:2.1.8:revision (default) @ geogig-geotools ---
[WARNING] Failed to getClass for org.apache.maven.plugin.source.SourceJarMojo
[INFO] 
[INFO] <<< maven-source-plugin:2.2.1:jar (attach-sources) < generate-sources @ geogig-geotools <<<
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar (attach-sources) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-sources.jar
[INFO] 
[INFO] >>> maven-source-plugin:2.2.1:test-jar (attach-sources) > generate-sources @ geogig-geotools >>>
[INFO] 
[INFO] --- git-commit-id-plugin:2.1.8:revision (default) @ geogig-geotools ---
[WARNING] Failed to getClass for org.apache.maven.plugin.source.TestSourceJarMojo
[INFO] 
[INFO] <<< maven-source-plugin:2.2.1:test-jar (attach-sources) < generate-sources @ geogig-geotools <<<
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:test-jar (attach-sources) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-test-sources.jar
[INFO] 
[INFO] --- maven-install-plugin:2.4:install (default-install) @ geogig-geotools ---
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/pom.xml to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT.pom
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-tests.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-tests.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-sources.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-sources.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-test-sources.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-test-sources.jar
[JENKINS] Archiving disabled