SuccessConsole Output

Started calculate disk usage of build
Finished Calculation of disk usage of build in 0 seconds
Started calculate disk usage of workspace
Finished Calculation of disk usage of workspace in 0 seconds
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building GeoTools Extension 1.1-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] 
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ geogig-geotools ---
[INFO] Deleting /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target
[INFO] 
[INFO] --- git-commit-id-plugin:2.1.8:revision (default) @ geogig-geotools ---
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ geogig-geotools ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 2 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ geogig-geotools ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 62 source files to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/classes
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java uses unchecked or unsafe operations.
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java: Recompile with -Xlint:unchecked for details.
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ geogig-geotools ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 14 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ geogig-geotools ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 33 source files to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/test/java/org/locationtech/geogig/geotools/test/storage/MemoryDataStoreWithProvidedFIDSupport.java: Some input files use unchecked or unsafe operations.
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/test/java/org/locationtech/geogig/geotools/test/storage/MemoryDataStoreWithProvidedFIDSupport.java: Recompile with -Xlint:unchecked for details.
[INFO] 
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ geogig-geotools ---
[INFO] Surefire report directory: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/surefire-reports

-------------------------------------------------------
 T E S T S
-------------------------------------------------------

-------------------------------------------------------
 T E S T S
-------------------------------------------------------
Running org.locationtech.geogig.geotools.cli.geojson.GeoJsonImportTest
Running org.locationtech.geogig.geotools.cli.geojson.GeoJsonExportTest
Running org.locationtech.geogig.geotools.cli.shp.RunShpFunctionalTest
Running org.locationtech.geogig.geotools.cli.shp.ShpImportTest
Running org.locationtech.geogig.geotools.cli.shp.ShpExportTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgDescribeTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgPullTest
Running org.locationtech.geogig.geotools.cli.geopkg.RunGeoPkgFunctionalTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgImportTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgListTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgExportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleListTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleImportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleExportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleDescribeTest
Running org.locationtech.geogig.geotools.cli.postgis.PGExportTest
Running org.locationtech.geogig.geotools.cli.postgis.PGImportTest
Running org.locationtech.geogig.geotools.cli.postgis.PGListTest
Running org.locationtech.geogig.geotools.cli.postgis.PGDescribeTest
Running org.locationtech.geogig.geotools.plumbing.ExportOpTest
Running org.locationtech.geogig.geotools.plumbing.ImportOpTest
Running org.locationtech.geogig.geotools.plumbing.ExportDiffOpTest
Running org.locationtech.geogig.geotools.plumbing.DescribeOpTest
Running org.locationtech.geogig.geotools.plumbing.ListOpTest
Usage: geogig describe [options]
  Options:
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test9171681910989421731.gpkg
  * --table, -t
       Table to describe.
       Default: <empty string>
    --user, -U
       User name.  Default: user
       Default: user

Feature: "shp export" command
    In order to export data to Geogig
    As a Geogig User
    I want to export from the repository to a shapefile
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
Feature: "geopkg describe" command
    In order to understand the structure of a table in a GeoPackage file
    As a Geogig User
    I want Geogig to describe the table
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try describing a GeoPackage table from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
Importing from database database
Usage: geogig describe [options]
  Options:
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
  * --table, -t
       Table to describe.
       Default: <empty string>
    --user, -U
       User name.  Default: postgres
       Default: postgres

The shapefile '/home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp' could not be found, skipping...
Importing from database database
The GeoJSON file 'file://nonexistent.geojson' could not be found, skipping...

Exporting from Points to Points... 
33%
Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Importing table2           (1/2)... 
100%
Points exported successfully to Points

Exporting repository metadata from 'HEAD:Points' (commit 7754ae5c8b6387e3b964f6675d3e1a1898b0a155)...

Creating audit metadata for table 'Points'
Usage: geogig import [options] <geojson> [<geojson>]...
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --geom-name
       Name to use for geometry attribute, replacing the default one
       ('geometry')
    --geom-name-auto
       Uses the name of the geometry descriptor in the destination feature type
       Default: false

Importing from GeoJSON /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/geojson/sample.geojson

Importing feature          (1/1)... 
0%
1 features inserted in 91.96 ms

Building final tree table2...

1 features tree built in 16.12 ms

Importing table1           (2/2)... 

Importing changes to table Points onto feature tree Points...
0%
0%
Usage: geogig export [options] <path> <geojson>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 8.318 sec - in org.locationtech.geogig.geotools.plumbing.DescribeOpTest
Running org.locationtech.geogig.geotools.plumbing.FeatureTypeAdapterFeatureSourceTest
Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 8.394 sec - in org.locationtech.geogig.geotools.plumbing.ExportDiffOpTest
2%
2 features inserted in 128.8 ms

Building final tree feature...

2 features tree built in 22.84 ms
Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.093 sec - in org.locationtech.geogig.geotools.plumbing.FeatureTypeAdapterFeatureSourceTest
100%
/home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/geojson/sample.geojson imported successfully.
Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 8.719 sec - in org.locationtech.geogig.geotools.plumbing.ExportOpTest
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 9.316 sec - in org.locationtech.geogig.geotools.cli.geojson.GeoJsonImportTest
Import successful.
Changes committed and merge at 9484e1c1b2b163f5d892c496c717b9acf859613b

Exporting from WORK_HEAD:Points to Points... 
Importing from database database
33%
100%
Importing from database database
Fetching table...
WORK_HEAD:Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit7407255393740808941/repo-1427120472/TestPoints.geojson

Exporting from Points to Points... 
33%
Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test8107752802994176606.gpkg
100%
Points exported successfully to Points

Exporting repository metadata from 'HEAD:Points' (commit 047a3ec960bcb03fc79c11c82590538f68627e6d)...

Creating audit metadata for table 'Points'

Importing Lines            (1/2)... 

Exporting from Points to Points... 
Importing from database database
33%
Importing changes to table Points onto feature tree Points...
0%
Importing table2           (1/2)... 
67%
100%
Points exported successfully to Points
Import successful.
Changes committed and merge at 7d5b684390a87138eb08abd053bc7cf2f519e051

Exporting repository metadata from 'HEAD:Points' (commit c5ed002543eab2ee23cdb069b361c0535396a3e0)...

Creating audit metadata for table 'Points'
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 9.752 sec - in org.locationtech.geogig.geotools.plumbing.ListOpTest

Exporting from Points to Points... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit112050674728399150/repo1822628517/TestPoints.geojson
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a feature type': Using URIBuilder DefaultTestRepoURIBuilder
0%
Importing from database database

Exporting from Points to Points... 

Exporting from Points to Points... 
33%
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit4767107880789001952/repo-1783373347/TestPoints.geojson

Exporting from Lines to Lines... 
33%
Lines exported successfully to /opt/public/hipp/ramdisk/geogig/junit4767107880789001952/repo-1783373347/TestPoints.geojson
Tests run: 6, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 11.294 sec - in org.locationtech.geogig.geotools.cli.geojson.GeoJsonExportTest
0%
3 features inserted in 107.0 ms

Building final tree Lines...

3 features tree built in 2.188 ms
100%
Points exported successfully to Points

1 features inserted in 79.12 ms

Exporting repository metadata from 'HEAD:Points' (commit e287f80a6cf223ac034e760ab1bf716c2565144f)...

Building final tree table2...

Creating audit metadata for table 'Points'

Importing Points           (2/2)... 

1 features tree built in 24.21 ms
Importing from database database

Importing table1           (2/2)... 
Fetching table...
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------
1%
3 features inserted in 6.523 ms

Building final tree Points...

3 features tree built in 1.031 ms
Fetching table...
100%
Import successful.
Importing from database database
Fetching table...

Importing changes to table Points onto feature tree Points...
0%
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------
Fetching table...
Importing from database database

Importing table1           (1/1)... 
Fetching table...
Tests run: 8, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 11.59 sec - in org.locationtech.geogig.geotools.cli.postgis.PGDescribeTest
0%
2 features inserted in 4.096 ms

Building final tree table1...

  Scenario: Try exporting from an empty directory                    # ShpExport.feature:6
    Given I am in an empty directory                                 # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "shp export Points Points.shp"            # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should start with "Not in a geogig repository" # DefaultStepDefinitions.the_response_should_start_with(String)

2 features tree built in 16.52 ms
Fetching table...
100%
Import successful.
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------
Fetching feature types...
 - table4
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable
Fetching feature types...
 - table4
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable
Importing from database database
Fetching feature types...
Fetching table...
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 11.905 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleDescribeTest
Fetching feature types...
Importing from database database
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.272 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgPullTest
Usage: geogig import [options]
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --all
       Import all tables.
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --database, -D
       The database to connect to.  Default: database
       Default: database
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --table, -t
       Table to import.
       Default: <empty string>
    --user, -U
       User name.  Default: postgres
       Default: postgres

Fetching feature types...
Fetching table...
Tests run: 8, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.347 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgDescribeTest
Fetching feature types...
Fetching feature types...
 - table4
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable

Importing table2           (1/2)... 
Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test8513748932091692605.gpkg
Importing from database database

Importing Points           (1/1)... 

Importing table4           (1/8)... 
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: postgres
       Default: postgres

Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.201 sec - in org.locationtech.geogig.geotools.cli.postgis.PGListTest
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to. Default: database
       Default: database
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: oracle
       Default: oracle

Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.321 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleListTest
Fetching feature types...

Importing table3           (2/8)... 
0%
1 features inserted in 3.043 ms

Building final tree table3...

1 features tree built in 637.1 μs
0%
Importing table2           (3/8)... 

3 features inserted in 5.774 ms

Building final tree Points...

3 features tree built in 9.609 ms
Fetching feature types...
100%
Import successful.
Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.471 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgImportTest

1 features inserted in 2.475 ms

Building final tree table2...

1 features tree built in 846.0 μs
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: database.gpkg
    --user, -U
       User name.  Default: user
       Default: user

The shapefile 'file://nonexistent.shp' could not be found, skipping...
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.545 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgListTest

Importing table1           (4/8)... 
0%
2 features inserted in 2.992 ms

Building final tree table1...

2 features tree built in 4.402 ms

Importing shpLikeTable2    (5/8)... 
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: database.gpkg
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    -i, --interchange
       Export as geogig mobile interchange format
       Default: false
    --overwrite, -o
       Overwrite output table
       Default: false
    --user, -U
       User name.  Default: user
       Default: user


1 features inserted in 2.747 ms

Building final tree shpLikeTable2...

1 features tree built in 898.4 μs
0%
1 features inserted in 30.38 ms
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Could not find the specified table.
org.locationtech.geogig.cli.CommandFailedException: Could not find the specified table.
	at org.locationtech.geogig.geotools.cli.DataStoreDescribe.runInternal(DataStoreDescribe.java:68)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

Building final tree table2...
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)

1 features tree built in 17.50 ms
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)

Importing shpLikeTable     (6/8)... 

Importing table1           (2/2)... 
Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
2017-05-26T13:55:04.308-0400  SEVERE  There's code using JDBC based datastore and not disposing them. This may lead to temporary loss of database connections. Please make sure all data access code calls DataStore.dispose() before freeing all references to it
1%
1 features inserted in 1.609 ms

Building final tree shpLikeTable...

1 features tree built in 852.4 μs
Importing from database database

Importing GeoJsonLikeTa... (7/8)... 

1 features inserted in 1.827 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 663.4 μs

Importing GeoJsonLikeTable (8/8)... 
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

Importing from database database

Importing table1           (1/1)... 

1 features inserted in 2.178 ms

Building final tree GeoJsonLikeTable...
Usage: geogig import [options] <shapefile> [<shapefile>]...
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --charset
       Use the specified charset to decode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --create, -c
       Only create the schema, do not actually import its features
       Default: false
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false


1 features tree built in 1.713 ms
0%
2 features inserted in 3.267 ms

Building final tree table1...

2 features tree built in 772.0 μs
100%
100%
100%
Import successful.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try describing a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder
Import successful.
Importing from database database
Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Importing table4           (1/8)... 

Importing table3           (2/8)... 
Tests run: 12, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.082 sec - in org.locationtech.geogig.geotools.cli.postgis.PGImportTest
0%
1 features inserted in 3.412 ms

Building final tree table3...

1 features tree built in 746.2 μs
Usage: geogig import [options]
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --all
       Import all tables.
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --database, -D
       The database to connect to. Default: database
       Default: database
    -d, --dest
       Path to import to
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --table, -t
       Table to import.
       Default: <empty string>
    --user, -U
       User name.  Default: oracle
       Default: oracle


Importing table2           (3/8)... 

1 features inserted in 2.075 ms

Building final tree table2...

1 features tree built in 847.2 μs

Exporting from WORK_HEAD:Points to Points... 
33%
Importing table1           (4/8)... 
Importing from database database

Importing table4           (1/8)... 
100%
WORK_HEAD:Points exported successfully to Points

Importing table3           (2/8)... 
0%
2 features inserted in 8.296 ms

Building final tree table1...

1 features inserted in 3.616 ms

Building final tree table3...

1 features tree built in 2.556 ms

Importing table2           (3/8)... 

2 features tree built in 1.327 ms

Importing shpLikeTable2    (5/8)... 

1 features inserted in 3.603 ms

Building final tree table2...

1 features tree built in 7.507 ms

Exporting from WORK_HEAD:Lines to Lines... 
33%
0%
Importing table1           (4/8)... 
WORK_HEAD:Lines exported successfully to Lines

1 features inserted in 2.842 ms

Building final tree shpLikeTable2...

1 features tree built in 737.5 μs

2 features inserted in 3.140 ms

Building final tree table1...

Importing shpLikeTable     (6/8)... 

2 features tree built in 761.3 μs

Importing shpLikeTable2    (5/8)... 

1 features inserted in 2.528 ms

1 features inserted in 2.467 ms

Building final tree shpLikeTable...

1 features tree built in 836.1 μs

Building final tree shpLikeTable2...

1 features tree built in 2.595 ms


Importing shpLikeTable     (6/8)... 
  Scenario: Try describing a GeoPackage table from an empty directory                    # GeoPkgDescribe.feature:6
    Given I am in an empty directory                                                     # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg describe --table test" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."               # DefaultStepDefinitions.the_response_should_contain(String)

Importing GeoJsonLikeTa... (7/8)... 
1%
1 features inserted in 1.698 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 487.8 μs

Importing GeoJsonLikeTable (8/8)... 

1 features inserted in 4.019 ms

Building final tree GeoJsonLikeTable...

1 features tree built in 555.2 μs
100%
/home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp imported successfully.
2017-05-26T13:55:05.058-0400  SEVERE  There's code using JDBC based datastore and not disposing them. This may lead to temporary loss of database connections. Please make sure all data access code calls DataStore.dispose() before freeing all references to it
Tests run: 10, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.924 sec - in org.locationtech.geogig.geotools.cli.shp.ShpImportTest
1%
1 features inserted in 2.359 ms

Building final tree shpLikeTable...

1 features tree built in 616.3 μs

Importing GeoJsonLikeTa... (7/8)... 

1 features inserted in 1.603 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 450.5 μs

Importing GeoJsonLikeTable (8/8)... 

1 features inserted in 1.785 ms

Building final tree GeoJsonLikeTable...

1 features tree built in 640.9 μs
100%
Import successful.
Tests run: 12, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.895 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleImportTest
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false


Exporting from WORK_HEAD:Points to testTable... 
33%
100%
WORK_HEAD:Points exported successfully to testTable

Exporting from Lines to testTable... 
33%
Lines exported successfully to testTable

Exporting from Points to Points... 
33%
100%
Points exported successfully to Points

Exporting from WORK_HEAD:Points to testTable... 
33%
100%
WORK_HEAD:Points exported successfully to testTable

Exporting from Points to Points... 
33%
100%
Points exported successfully to Points

Exporting from Lines to testTable... 
33%
Lines exported successfully to testTable
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to describe a GeoPackage table that doesn't exit in the database': Using URIBuilder DefaultTestRepoURIBuilder

Exporting from WORK_HEAD:Points to TestPoints... 
33%
100%
WORK_HEAD:Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit5200591517341718481/repo435327168/TestPoints.shp

Exporting from Points to Points... 
33%
100%
Points exported successfully to Points
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to. Default: database
       Default: database
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --overwrite, -o
       Overwrite output table
       Default: false
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: oracle
       Default: oracle

Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.62 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleExportTest

  Scenario: Try describing a GeoPackage table                                              # GeoPkgDescribe.feature:11
    Given I have a repository                                                              # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg describe --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Table : Points"                                      # DefaultStepDefinitions.the_response_should_contain(String)

Exporting from Points to Points... 
33%
100%
Points exported successfully to Points

Exporting from Lines to Points... 
33%
Lines exported successfully to Points

Exporting from Points to TestPoints... 
33%
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.825 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgExportTest
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --overwrite, -o
       Overwrite output table
       Default: false
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: postgres
       Default: postgres

Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.808 sec - in org.locationtech.geogig.geotools.cli.postgis.PGExportTest
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Could not find the specified table.
org.locationtech.geogig.cli.CommandFailedException: Could not find the specified table.
	at org.locationtech.geogig.geotools.cli.DataStoreDescribe.runInternal(DataStoreDescribe.java:68)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)

  Scenario: Try to describe a GeoPackage table that doesn't exit in the database                      # GeoPkgDescribe.feature:16
    Given I have a repository                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg describe --table nonexistant_table" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."                            # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg export" command
    In order to export data to Geogig
    As a Geogig User
    I want to export from the repository into a GeoPackage file
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false


Exporting from Points to TestPoints... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit3974961287320027588/repo-400246639/TestPoints.shp
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a feature type': Using URIBuilder DefaultTestRepoURIBuilder

Exporting from Points to TestPoints... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit1891677035326733429/repo-522643837/TestPoints.shp

Exporting from Lines to TestPoints... 
33%
Lines exported successfully to /opt/public/hipp/ramdisk/geogig/junit1891677035326733429/repo-522643837/TestPoints.shp
Tests run: 10, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 15.657 sec - in org.locationtech.geogig.geotools.cli.shp.ShpExportTest

  Scenario: Try exporting from an empty directory                                 # GeoPkgExport.feature:6
    Given I am in an empty directory                                              # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg export Points Points" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository:"             # DefaultStepDefinitions.the_response_should_start_with(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting an inexistent feature type': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting a feature type                                          # ShpExport.feature:11
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                        # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "shp export -o Points Points.shp"                      # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting an inexistent feature type': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting a feature type                                               # GeoPkgExport.feature:11
    Given I have a repository                                                          # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                             # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export -o Points MyPoints" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "Points exported successfully to MyPoints"        # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting an inexistent feature type                                      # ShpExport.feature:17
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "shp export WRONGTABLE Points.shp"                             # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "pathspec 'WRONGTABLE' did not match any valid path" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting to a table that already exists': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting an inexistent feature type                                      # GeoPkgExport.feature:17
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export WRONGTABLE Points" on a new GeoPackage file     # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "pathspec 'WRONGTABLE' did not match any valid path" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types using the default feature type': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting with mixed feature types                                                    # ShpExport.feature:23
    Given I have a repository                                                                         # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                                        # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o Points Points.shp"                                          # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "The selected tree contains mixed feature types"                 # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Use --defaulttype or --featuretype <feature_type_ref> to export" # DefaultStepDefinitions.the_response_should_contain(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - The selected table already exists. Use -o to overwrite
org.locationtech.geogig.cli.CommandFailedException: The selected table already exists. Use -o to overwrite
	at org.locationtech.geogig.geotools.cli.DataStoreExport.exportInternal(DataStoreExport.java:134)
	at org.locationtech.geogig.geotools.cli.DataStoreExport.runInternal(DataStoreExport.java:99)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgExport.runInternal(GeopkgExport.java:75)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a table from HEAD': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types using --alter': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting to a table that already exists                                      # GeoPkgExport.feature:23
    Given I have a repository                                                                 # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                    # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export Points Points" on an existing GeoPackage file       # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "The selected table already exists. Use -o to overwrite" # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting with mixed feature types using the default feature type # ShpExport.feature:30
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                    # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o --defaulttype Points Points.shp"        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a table from HEAD': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting a table from HEAD                                                       # GeoPkgExport.feature:29
    Given I have a repository                                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                        # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "commit -m TestCommit"                                                 # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "geopkg export -o HEAD:Points CommitedPoints" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "Points exported successfully to CommitedPoints"             # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg import" command
    In order to import data to Geogig
    As a Geogig User
    I want to import one or more tables from a GeoPackage file
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try importing into an empty directory': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting with mixed feature types using --alter                  # ShpExport.feature:36
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                    # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o --defaulttype Points Points.shp"        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try importing into an empty directory                                        # GeoPkgImport.feature:6
    Given I am in an empty directory                                                     # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg import --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"                     # DefaultStepDefinitions.the_response_should_start_with(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a full GeoPackage file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a GeoPackage table                                             # GeoPkgImport.feature:11
    Given I have a repository                                                            # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Import successful."                                # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting a table from HEAD                                               # ShpExport.feature:42
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "commit -m TestCommit"                                         # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "shp export -o HEAD:Points CommitedPoints.shp"                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to CommitedPoints.shp" # DefaultStepDefinitions.the_response_should_contain(String)

7 Scenarios (7 passed)
29 Steps (29 passed)
0m18.007s

Tests run: 36, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 20.188 sec - in org.locationtech.geogig.geotools.cli.shp.RunShpFunctionalTest
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a GeoPackage table that doesn't exit in the file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a full GeoPackage file                                # GeoPkgImport.feature:16
    Given I have a repository                                                   # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --all" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Import successful."                       # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import without specifying table or -all': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a GeoPackage table that doesn't exit in the file                          # GeoPkgImport.feature:21
    Given I have a repository                                                                       # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table nonexistant_table" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."                          # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import with table and -all': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import without specifying table or -all                                               # GeoPkgImport.feature:26
    Given I have a repository                                                                            # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import" on an existing GeoPackage file                                # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "No tables specified for import. Specify --all or --table <table>." # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try to import with table and -all                                                  # GeoPkgImport.feature:31
    Given I have a repository                                                                  # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table Points --all" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Specify --all or --table <table>, both cannot be set."   # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg list" command
    In order to know all of the features available in a GeoPackage file
    As a Geogig User
    I want to list all of the features
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try listing from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try listing from a valid directory': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try listing from an empty directory                         # GeoPkgList.feature:6
    Given I am in an empty directory                                    # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg list" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"    # DefaultStepDefinitions.the_response_should_start_with(String)

  Scenario: Try listing from a valid directory                          # GeoPkgList.feature:11
    Given I have a repository                                           # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg list" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Points"                           # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg pull" command
    In order to import data to Geogig
    As a Geogig User
    I want to import one or more tables from a GeoPackage file with the interchange format
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try pulling into an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table without commit message': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try pulling into an empty directory                                        # GeoPkgPull.feature:6
    Given I am in an empty directory                                                   # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg pull --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"                   # DefaultStepDefinitions.the_response_should_start_with(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Commit message not provided
java.lang.IllegalArgumentException: Commit message not provided
	at com.google.common.base.Preconditions.checkArgument(Preconditions.java:122)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:64)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(GeoPkgStepDefinitions.java:116)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table without commit message                                  # GeoPkgPull.feature:11
    Given I have a repository                                                                      # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Commit message not provided"                                 # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table that doesn't exit in the file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table                                                                            # GeoPkgPull.feature:16
    Given I have a repository                                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Import successful."                                                             # DefaultStepDefinitions.the_response_should_contain(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Unable to import: No table to import.
java.lang.IllegalStateException: No table to import.
	at com.google.common.base.Preconditions.checkState(Preconditions.java:173)
	at org.locationtech.geogig.geotools.geopkg.InterchangeFormat.importAuditLog(InterchangeFormat.java:270)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:81)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(GeoPkgStepDefinitions.java:116)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull without specifying table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table that doesn't exit in the file                                                         # GeoPkgPull.feature:21
    Given I have a repository                                                                                                    # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table nonexistant_table --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Unable to import: No table to import."                                                     # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table with a conflict': Using URIBuilder DefaultTestRepoURIBuilder
[main] WARN org.locationtech.geogig.geotools.plumbing.ImportOp - Error looking for known identifier for CRS null
org.locationtech.geogig.porcelain.CRSException: Could not find identifier associated with the defined CRS: 
GEOGCS["GCS_WGS_1985", 
  DATUM["D_WGS_1985", 
    SPHEROID["WGS_1985", 6378137.0, 298.257223563]], 
  PRIMEM["Greenwich", 0.0], 
  UNIT["degree", 0.017453292519943295], 
  AXIS["Longitude", EAST], 
  AXIS["Latitude", NORTH]]
	at org.locationtech.geogig.repository.impl.SpatialOps.findKnownCrs(SpatialOps.java:218)
	at org.locationtech.geogig.repository.impl.SpatialOps.findIdentifier(SpatialOps.java:202)
	at org.locationtech.geogig.geotools.plumbing.ImportOp.tryForceKnownCRS(ImportOp.java:281)
	at org.locationtech.geogig.geotools.plumbing.ImportOp._call(ImportOp.java:221)
	at org.locationtech.geogig.geotools.plumbing.ImportOp._call(ImportOp.java:87)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.plumbing.ImportOpTest.testForcedKnownCrsIdentifierNoMatch(ImportOpTest.java:479)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
	at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
	at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
	at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:17)
	at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:26)
	at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:27)
	at org.junit.rules.ExpectedException$ExpectedExceptionStatement.evaluate(ExpectedException.java:239)
	at org.junit.rules.ExternalResource$1.evaluate(ExternalResource.java:48)
	at org.junit.rules.RunRules.evaluate(RunRules.java:20)
	at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:325)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:78)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:57)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)

  Scenario: Try to pull without specifying table                                                       # GeoPkgPull.feature:26
    Given I have a repository                                                                          # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Import successful."                                              # DefaultStepDefinitions.the_response_should_contain(String)
Tests run: 24, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 23.72 sec - in org.locationtech.geogig.geotools.plumbing.ImportOpTest
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - CONFLICT: Merge conflict in Points/Points.1
Automatic merge failed. Fix conflicts and then commit the result.

org.locationtech.geogig.geotools.geopkg.GeopkgMergeConflictsException: CONFLICT: Merge conflict in Points/Points.1
Automatic merge failed. Fix conflicts and then commit the result.

	at org.locationtech.geogig.geotools.geopkg.InterchangeFormat.importAuditLog(InterchangeFormat.java:342)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:81)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file_with_conflict(GeoPkgStepDefinitions.java:157)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)

  Scenario: Try to pull a GeoPackage table with a conflict                                                                            # GeoPkgPull.feature:31
    Given I have a repository                                                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points --message imported" on an existing interchange GeoPackage file with a conflict # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file_with_conflict(String)
    Then the response should contain "CONFLICT: Merge conflict in"                                                                    # DefaultStepDefinitions.the_response_should_contain(String)

22 Scenarios (22 passed)
71 Steps (71 passed)
0m22.271s

Tests run: 93, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 24.461 sec - in org.locationtech.geogig.geotools.cli.geopkg.RunGeoPkgFunctionalTest

Results :

Tests run: 316, Failures: 0, Errors: 0, Skipped: 0

[JENKINS] Recording test results
[INFO] 
[INFO] --- maven-jar-plugin:2.4:jar (default-jar) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT.jar
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-tests.jar
[INFO] 
[INFO] >>> maven-source-plugin:2.2.1:jar (attach-sources) > generate-sources @ geogig-geotools >>>
[INFO] 
[INFO] --- git-commit-id-plugin:2.1.8:revision (default) @ geogig-geotools ---
[WARNING] Failed to getClass for org.apache.maven.plugin.source.SourceJarMojo
[INFO] 
[INFO] <<< maven-source-plugin:2.2.1:jar (attach-sources) < generate-sources @ geogig-geotools <<<
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar (attach-sources) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-sources.jar
[INFO] 
[INFO] >>> maven-source-plugin:2.2.1:test-jar (attach-sources) > generate-sources @ geogig-geotools >>>
[INFO] 
[INFO] --- git-commit-id-plugin:2.1.8:revision (default) @ geogig-geotools ---
[WARNING] Failed to getClass for org.apache.maven.plugin.source.TestSourceJarMojo
[INFO] 
[INFO] <<< maven-source-plugin:2.2.1:test-jar (attach-sources) < generate-sources @ geogig-geotools <<<
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:test-jar (attach-sources) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-test-sources.jar
[INFO] 
[INFO] --- maven-install-plugin:2.4:install (default-install) @ geogig-geotools ---
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/pom.xml to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT.pom
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-tests.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-tests.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-sources.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-sources.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-test-sources.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-test-sources.jar
[JENKINS] Archiving disabled