SuccessConsole Output

Started calculate disk usage of build
Finished Calculation of disk usage of build in 0 seconds
Started calculate disk usage of workspace
Finished Calculation of disk usage of workspace in 0 seconds
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building GeoTools Extension 1.1-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] 
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ geogig-geotools ---
[INFO] Deleting /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target
[INFO] 
[INFO] --- git-commit-id-plugin:2.1.8:revision (default) @ geogig-geotools ---
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ geogig-geotools ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 2 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ geogig-geotools ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 62 source files to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/classes
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java uses unchecked or unsafe operations.
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java: Recompile with -Xlint:unchecked for details.
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ geogig-geotools ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 14 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ geogig-geotools ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 33 source files to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/test/java/org/locationtech/geogig/geotools/test/storage/MemoryDataStoreWithProvidedFIDSupport.java: Some input files use unchecked or unsafe operations.
[WARNING] /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/src/test/java/org/locationtech/geogig/geotools/test/storage/MemoryDataStoreWithProvidedFIDSupport.java: Recompile with -Xlint:unchecked for details.
[INFO] 
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ geogig-geotools ---
[INFO] Surefire report directory: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/surefire-reports

-------------------------------------------------------
 T E S T S
-------------------------------------------------------

-------------------------------------------------------
 T E S T S
-------------------------------------------------------
Running org.locationtech.geogig.geotools.cli.geojson.GeoJsonImportTest
Running org.locationtech.geogig.geotools.cli.geojson.GeoJsonExportTest
Running org.locationtech.geogig.geotools.cli.shp.ShpImportTest
Running org.locationtech.geogig.geotools.cli.shp.RunShpFunctionalTest
Running org.locationtech.geogig.geotools.cli.shp.ShpExportTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgDescribeTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgPullTest
Running org.locationtech.geogig.geotools.cli.geopkg.RunGeoPkgFunctionalTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgImportTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgListTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgExportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleListTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleImportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleExportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleDescribeTest
Running org.locationtech.geogig.geotools.cli.postgis.PGExportTest
Running org.locationtech.geogig.geotools.cli.postgis.PGImportTest
Running org.locationtech.geogig.geotools.cli.postgis.PGDescribeTest
Running org.locationtech.geogig.geotools.cli.postgis.PGListTest
Running org.locationtech.geogig.geotools.plumbing.ExportOpTest
Running org.locationtech.geogig.geotools.plumbing.ImportOpTest
Running org.locationtech.geogig.geotools.plumbing.ExportDiffOpTest
Running org.locationtech.geogig.geotools.plumbing.DescribeOpTest
Running org.locationtech.geogig.geotools.plumbing.ListOpTest
Feature: "shp export" command
    In order to export data to Geogig
    As a Geogig User
    I want to export from the repository to a shapefile
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
Feature: "geopkg describe" command
    In order to understand the structure of a table in a GeoPackage file
    As a Geogig User
    I want Geogig to describe the table
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try describing a GeoPackage table from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
Usage: geogig describe [options]
  Options:
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test3189436667534528806.gpkg
  * --table, -t
       Table to describe.
       Default: <empty string>
    --user, -U
       User name.  Default: user
       Default: user

Usage: geogig describe [options]
  Options:
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
  * --table, -t
       Table to describe.
       Default: <empty string>
    --user, -U
       User name.  Default: postgres
       Default: postgres

The GeoJSON file 'file://nonexistent.geojson' could not be found, skipping...
The shapefile '/home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp' could not be found, skipping...
Importing from database database
Usage: geogig import [options] <geojson> [<geojson>]...
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --geom-name
       Name to use for geometry attribute, replacing the default one
       ('geometry')
    --geom-name-auto
       Uses the name of the geometry descriptor in the destination feature type
       Default: false

Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Importing table2           (1/2)... 
Importing from GeoJSON /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/geojson/sample.geojson

Importing feature          (1/1)... 
0%
0%
Importing from database database

2 features inserted in 45.29 ms

1 features inserted in 41.50 ms

Building final tree feature...

2 features tree built in 9.242 ms

Building final tree table2...

1 features tree built in 4.864 ms
100%
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 8.054 sec - in org.locationtech.geogig.geotools.plumbing.ListOpTest
Running org.locationtech.geogig.geotools.plumbing.FeatureTypeAdapterFeatureSourceTest
100%
/home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/geojson/sample.geojson imported successfully.

Importing table1           (2/2)... 
Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.059 sec - in org.locationtech.geogig.geotools.plumbing.FeatureTypeAdapterFeatureSourceTest
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 8.609 sec - in org.locationtech.geogig.geotools.cli.geojson.GeoJsonImportTest
Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 8.314 sec - in org.locationtech.geogig.geotools.plumbing.ExportDiffOpTest
Usage: geogig export [options] <path> <geojson>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test6338262273110838184.gpkg

Importing Lines            (1/2)... 

Exporting from Points to Points... 
33%
67%
100%
Points exported successfully to Points

Exporting repository metadata from 'HEAD:Points' (commit ceedbb6f657780a67bd72be3d7ce29ad22e7efd4)...

Creating audit metadata for table 'Points'

Exporting from WORK_HEAD:Points to Points... 
33%
100%
WORK_HEAD:Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit74680025521187606/repo1344910882/TestPoints.geojson

Exporting from Points to Points... 
33%
0%
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 9.403 sec - in org.locationtech.geogig.geotools.plumbing.DescribeOpTest
67%
3 features inserted in 139.8 ms
100%
Points exported successfully to Points

Building final tree Lines...

3 features tree built in 8.237 ms

Importing Points           (2/2)... 

Exporting repository metadata from 'HEAD:Points' (commit 9a8a8e11e2c9896dc9825fe655c5d156d9f4ad97)...
Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 9.831 sec - in org.locationtech.geogig.geotools.plumbing.ExportOpTest

Creating audit metadata for table 'Points'
1%
3 features inserted in 5.013 ms

Building final tree Points...

3 features tree built in 4.783 ms
100%
Import successful.
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a feature type': Using URIBuilder DefaultTestRepoURIBuilder
Importing from database database
Fetching table...
Importing from database database

Exporting from Points to Points... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit150391549726522191/repo1150427504/TestPoints.geojson

Importing changes to table Points onto feature tree Points...
0%
Fetching feature types...
 - table4
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable
Fetching feature types...
Fetching feature types...
Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test3983799625134131211.gpkg

  Scenario: Try exporting from an empty directory                    # ShpExport.feature:6
    Given I am in an empty directory                                 # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "shp export Points Points.shp"            # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should start with "Not in a geogig repository" # DefaultStepDefinitions.the_response_should_start_with(String)

Importing Points           (1/1)... 
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: postgres
       Default: postgres

Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 11.726 sec - in org.locationtech.geogig.geotools.cli.postgis.PGListTest
Import successful.
Changes committed and merge at 83a1b6923605795d13a16fa41218a9b529db824b
0%
3 features inserted in 5.139 ms

Building final tree Points...

3 features tree built in 882.6 μs
Fetching table...

Exporting from Points to Points... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit7778458288783097012/repo-2130602706/TestPoints.geojson

Exporting from Lines to Lines... 
33%
100%
Import successful.
Lines exported successfully to /opt/public/hipp/ramdisk/geogig/junit7778458288783097012/repo-2130602706/TestPoints.geojson
Tests run: 6, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.178 sec - in org.locationtech.geogig.geotools.cli.geojson.GeoJsonExportTest
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: database.gpkg
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    -i, --interchange
       Export as geogig mobile interchange format
       Default: false
    --overwrite, -o
       Overwrite output table
       Default: false
    --user, -U
       User name.  Default: user
       Default: user

Fetching table...
Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.177 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgImportTest
Importing from database database
Importing from database database
Fetching table...

Importing table2           (1/2)... 
The shapefile 'file://nonexistent.shp' could not be found, skipping...
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------
Fetching feature types...
 - table4
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable

Exporting from Points to Points... 
33%
Fetching table...
100%
Points exported successfully to Points

Exporting repository metadata from 'HEAD:Points' (commit d780f32b4c03c80683d048913a013c660f6d2df8)...

Creating audit metadata for table 'Points'
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
Importing from database database
	Property  : geom
	Type      : Point
----------------------------------------
Fetching feature types...
Fetching table...
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.455 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleDescribeTest
Fetching table...
Tests run: 8, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.507 sec - in org.locationtech.geogig.geotools.cli.postgis.PGDescribeTest

Importing changes to table Points onto feature tree Points...
0%
Fetching feature types...
0%
1 features inserted in 48.85 ms

Building final tree table2...
Import successful.
Changes committed and merge at 770ff3c1327e99ac097dfa85007879b59c5406fd

1 features tree built in 11.67 ms

Importing table1           (2/2)... 
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to. Default: database
       Default: database
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: oracle
       Default: oracle

Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.861 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleListTest
Importing from database database
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Could not find the specified table.
org.locationtech.geogig.cli.CommandFailedException: Could not find the specified table.
	at org.locationtech.geogig.geotools.cli.DataStoreDescribe.runInternal(DataStoreDescribe.java:68)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)

Exporting from WORK_HEAD:Points to Points... 
33%
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)100%
WORK_HEAD:Points exported successfully to Points

	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
Importing from database database

Importing table1           (1/1)... 
Fetching table...
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------
0%
2 features inserted in 4.432 ms

Building final tree table1...

2 features tree built in 1.030 ms
100%
Import successful.
Importing from database database

Exporting from Points to Points... 
33%
Exporting from WORK_HEAD:Lines to Lines... 
33%
WORK_HEAD:Lines exported successfully to Lines
100%
Points exported successfully to Points

Exporting repository metadata from 'HEAD:Points' (commit ebb2f85c44193222bbbf3a5b4a2135c02e5fb942)...

Creating audit metadata for table 'Points'
Importing from database database
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try describing a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder

Importing table2           (1/2)... 
Usage: geogig import [options]
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --all
       Import all tables.
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --database, -D
       The database to connect to.  Default: database
       Default: database
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --table, -t
       Table to import.
       Default: <empty string>
    --user, -U
       User name.  Default: postgres
       Default: postgres

Importing from database database

Importing table4           (1/8)... 
Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Importing table3           (2/8)... 
0%
1 features inserted in 3.019 ms

Building final tree table3...

1 features tree built in 692.2 μs

Importing table2           (3/8)... 
Fetching feature types...
 - table4
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable

1 features inserted in 10.06 ms

Building final tree table2...

1 features tree built in 773.6 μs

Importing table1           (4/8)... 

2 features inserted in 2.808 ms
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false


Building final tree table1...

2 features tree built in 821.8 μs

Importing changes to table Points onto feature tree Points...
0%
0%
Fetching table...
Tests run: 8, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.824 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgDescribeTest

1 features inserted in 32.71 ms

Importing shpLikeTable2    (5/8)... 
Usage: geogig import [options] <shapefile> [<shapefile>]...
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --charset
       Use the specified charset to decode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --create, -c
       Only create the schema, do not actually import its features
       Default: false
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false


Building final tree table2...

1 features tree built in 6.442 ms
Fetching feature types...
0%
1 features inserted in 2.207 ms

Building final tree shpLikeTable2...

1 features tree built in 5.488 ms

Importing table1           (2/2)... 
Importing from shapefile /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Importing table4           (1/8)... 
Fetching feature types...

Importing shpLikeTable     (6/8)... 

1 features inserted in 1.955 ms

Building final tree shpLikeTable...

1 features tree built in 590.6 μs

Importing table3           (2/8)... 
Importing from database database
0%
1 features inserted in 3.483 ms

Building final tree table3...

1 features tree built in 11.87 ms

Importing table2           (3/8)... 
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: database.gpkg
    --user, -U
       User name.  Default: user
       Default: user


Importing GeoJsonLikeTa... (7/8)... 
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.985 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgListTest
2017-05-10T18:45:56.853-0400  SEVERE  There's code using JDBC based datastore and not disposing them. This may lead to temporary loss of database connections. Please make sure all data access code calls DataStore.dispose() before freeing all references to it
Importing from database database

  Scenario: Try describing a GeoPackage table from an empty directory                    # GeoPkgDescribe.feature:6
    Given I am in an empty directory                                                     # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg describe --table test" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."               # DefaultStepDefinitions.the_response_should_contain(String)

Importing table1           (1/1)... 

1 features inserted in 2.575 ms

Building final tree table2...

1 features tree built in 8.831 ms
0%
Importing table1           (4/8)... 

2 features inserted in 3.292 ms

Building final tree table1...

2 features tree built in 14.31 ms
100%
Import successful.
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.149 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgPullTest
1%
1 features inserted in 1.520 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 3.420 ms
0%
2 features inserted in 4.756 ms

Building final tree table1...

Importing GeoJsonLikeTable (8/8)... 

2 features tree built in 11.81 ms
Importing from database database

Importing shpLikeTable2    (5/8)... 

1 features inserted in 1.673 ms

Building final tree GeoJsonLikeTable...

1 features tree built in 842.2 μs

1 features inserted in 3.051 ms

Building final tree shpLikeTable2...

1 features tree built in 653.4 μs
100%
Import successful.
Usage: geogig import [options]
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --all
       Import all tables.
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --database, -D
       The database to connect to. Default: database
       Default: database
    -d, --dest
       Path to import to
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --table, -t
       Table to import.
       Default: <empty string>
    --user, -U
       User name.  Default: oracle
       Default: oracle

Tests run: 12, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.165 sec - in org.locationtech.geogig.geotools.cli.postgis.PGImportTest

Importing shpLikeTable     (6/8)... 
Importing from database database

Importing table4           (1/8)... 

Importing table3           (2/8)... 
1%
1 features inserted in 3.960 ms

Building final tree shpLikeTable...

1 features tree built in 654.0 μs
0%
1 features inserted in 3.584 ms

Building final tree table3...

1 features tree built in 4.491 ms

Importing table2           (3/8)... 

Importing GeoJsonLikeTa... (7/8)... 

1 features inserted in 2.221 ms

Building final tree table2...

1 features tree built in 601.7 μs

Importing table1           (4/8)... 

1 features inserted in 1.800 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 5.204 ms

2 features inserted in 2.905 ms

Building final tree table1...

2 features tree built in 661.6 μs

Importing GeoJsonLikeTable (8/8)... 

Importing shpLikeTable2    (5/8)... 
1%
1 features inserted in 1.943 ms

Building final tree GeoJsonLikeTable...

1 features tree built in 2.516 ms
0%
1 features inserted in 2.262 ms

Building final tree shpLikeTable2...

1 features tree built in 476.2 μs
100%
/home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp imported successfully.

Importing shpLikeTable     (6/8)... 
Tests run: 10, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.77 sec - in org.locationtech.geogig.geotools.cli.shp.ShpImportTest

Exporting from Points to Points... 
33%
100%
Points exported successfully to Points
2017-05-10T18:45:57.667-0400  SEVERE  There's code using JDBC based datastore and not disposing them. This may lead to temporary loss of database connections. Please make sure all data access code calls DataStore.dispose() before freeing all references to it
1%
1 features inserted in 1.620 ms

Building final tree shpLikeTable...

1 features tree built in 7.054 ms

Importing GeoJsonLikeTa... (7/8)... 

1 features inserted in 1.649 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 673.7 μs

Importing GeoJsonLikeTable (8/8)... 

Exporting from WORK_HEAD:Points to testTable... 

1 features inserted in 1.331 ms

Building final tree GeoJsonLikeTable...

1 features tree built in 503.5 μs
33%
100%
Import successful.
100%
WORK_HEAD:Points exported successfully to testTable

Exporting from Lines to testTable... 
33%
Lines exported successfully to testTable
Tests run: 12, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.974 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleImportTest
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false


Exporting from Points to Points... 
33%
100%
Points exported successfully to Points

Exporting from Lines to Points... 
33%
Lines exported successfully to Points

Exporting from Points to Points... 
33%
100%
Points exported successfully to Points
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 15.248 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgExportTest

Exporting from WORK_HEAD:Points to TestPoints... 
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to describe a GeoPackage table that doesn't exit in the database': Using URIBuilder DefaultTestRepoURIBuilder
33%
100%
WORK_HEAD:Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit3627562362688180433/repo-1723452343/TestPoints.shp

  Scenario: Try describing a GeoPackage table                                              # GeoPkgDescribe.feature:11
    Given I have a repository                                                              # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg describe --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Table : Points"                                      # DefaultStepDefinitions.the_response_should_contain(String)
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to. Default: database
       Default: database
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --overwrite, -o
       Overwrite output table
       Default: false
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: oracle
       Default: oracle

Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 15.527 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleExportTest

Exporting from Points to TestPoints... 
33%
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Could not find the specified table.
org.locationtech.geogig.cli.CommandFailedException: Could not find the specified table.
	at org.locationtech.geogig.geotools.cli.DataStoreDescribe.runInternal(DataStoreDescribe.java:68)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)

Exporting from WORK_HEAD:Points to testTable... 

  Scenario: Try to describe a GeoPackage table that doesn't exit in the database                      # GeoPkgDescribe.feature:16
    Given I have a repository                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg describe --table nonexistant_table" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."                            # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg export" command
    In order to export data to Geogig
    As a Geogig User
    I want to export from the repository into a GeoPackage file
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
33%
100%
WORK_HEAD:Points exported successfully to testTable

Exporting from Lines to testTable... 
33%
Lines exported successfully to testTable
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false


Exporting from Points to Points... 
33%
100%
Points exported successfully to Points
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a feature type': Using URIBuilder DefaultTestRepoURIBuilder

Exporting from Points to TestPoints... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit3138456884599936948/repo-1786478486/TestPoints.shp
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --overwrite, -o
       Overwrite output table
       Default: false
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: postgres
       Default: postgres

Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 16.374 sec - in org.locationtech.geogig.geotools.cli.postgis.PGExportTest

  Scenario: Try exporting from an empty directory                                 # GeoPkgExport.feature:6
    Given I am in an empty directory                                              # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg export Points Points" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository:"             # DefaultStepDefinitions.the_response_should_start_with(String)

Exporting from Points to TestPoints... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit4926672058851067509/repo-1667801827/TestPoints.shp

Exporting from Lines to TestPoints... 
33%
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting an inexistent feature type': Using URIBuilder DefaultTestRepoURIBuilder
Lines exported successfully to /opt/public/hipp/ramdisk/geogig/junit4926672058851067509/repo-1667801827/TestPoints.shp
Tests run: 10, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 16.806 sec - in org.locationtech.geogig.geotools.cli.shp.ShpExportTest

  Scenario: Try exporting a feature type                                          # ShpExport.feature:11
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                        # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "shp export -o Points Points.shp"                      # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting an inexistent feature type': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting an inexistent feature type                                      # ShpExport.feature:17
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "shp export WRONGTABLE Points.shp"                             # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "pathspec 'WRONGTABLE' did not match any valid path" # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting a feature type                                               # GeoPkgExport.feature:11
    Given I have a repository                                                          # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                             # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export -o Points MyPoints" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "Points exported successfully to MyPoints"        # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types using the default feature type': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting with mixed feature types                                                    # ShpExport.feature:23
    Given I have a repository                                                                         # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                                        # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o Points Points.shp"                                          # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "The selected tree contains mixed feature types"                 # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Use --defaulttype or --featuretype <feature_type_ref> to export" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting to a table that already exists': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting an inexistent feature type                                      # GeoPkgExport.feature:17
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export WRONGTABLE Points" on a new GeoPackage file     # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "pathspec 'WRONGTABLE' did not match any valid path" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types using --alter': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting with mixed feature types using the default feature type # ShpExport.feature:30
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                    # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o --defaulttype Points Points.shp"        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - The selected table already exists. Use -o to overwrite
org.locationtech.geogig.cli.CommandFailedException: The selected table already exists. Use -o to overwrite
	at org.locationtech.geogig.geotools.cli.DataStoreExport.exportInternal(DataStoreExport.java:134)
	at org.locationtech.geogig.geotools.cli.DataStoreExport.runInternal(DataStoreExport.java:99)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgExport.runInternal(GeopkgExport.java:75)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a table from HEAD': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting to a table that already exists                                      # GeoPkgExport.feature:23
    Given I have a repository                                                                 # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                    # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export Points Points" on an existing GeoPackage file       # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "The selected table already exists. Use -o to overwrite" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a table from HEAD': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting with mixed feature types using --alter                  # ShpExport.feature:36
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                    # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o --defaulttype Points Points.shp"        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting a table from HEAD                                                       # GeoPkgExport.feature:29
    Given I have a repository                                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                        # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "commit -m TestCommit"                                                 # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "geopkg export -o HEAD:Points CommitedPoints" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "Points exported successfully to CommitedPoints"             # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg import" command
    In order to import data to Geogig
    As a Geogig User
    I want to import one or more tables from a GeoPackage file
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try importing into an empty directory': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting a table from HEAD                                               # ShpExport.feature:42
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "commit -m TestCommit"                                         # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "shp export -o HEAD:Points CommitedPoints.shp"                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to CommitedPoints.shp" # DefaultStepDefinitions.the_response_should_contain(String)

7 Scenarios (7 passed)
29 Steps (29 passed)
0m19.972s

Tests run: 36, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 21.712 sec - in org.locationtech.geogig.geotools.cli.shp.RunShpFunctionalTest
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try importing into an empty directory                                        # GeoPkgImport.feature:6
    Given I am in an empty directory                                                     # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg import --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"                     # DefaultStepDefinitions.the_response_should_start_with(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a full GeoPackage file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a GeoPackage table                                             # GeoPkgImport.feature:11
    Given I have a repository                                                            # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Import successful."                                # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a GeoPackage table that doesn't exit in the file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a full GeoPackage file                                # GeoPkgImport.feature:16
    Given I have a repository                                                   # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --all" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Import successful."                       # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import without specifying table or -all': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a GeoPackage table that doesn't exit in the file                          # GeoPkgImport.feature:21
    Given I have a repository                                                                       # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table nonexistant_table" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."                          # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import with table and -all': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import without specifying table or -all                                               # GeoPkgImport.feature:26
    Given I have a repository                                                                            # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import" on an existing GeoPackage file                                # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "No tables specified for import. Specify --all or --table <table>." # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try to import with table and -all                                                  # GeoPkgImport.feature:31
    Given I have a repository                                                                  # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table Points --all" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Specify --all or --table <table>, both cannot be set."   # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg list" command
    In order to know all of the features available in a GeoPackage file
    As a Geogig User
    I want to list all of the features
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try listing from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try listing from a valid directory': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try listing from an empty directory                         # GeoPkgList.feature:6
    Given I am in an empty directory                                    # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg list" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"    # DefaultStepDefinitions.the_response_should_start_with(String)

  Scenario: Try listing from a valid directory                          # GeoPkgList.feature:11
    Given I have a repository                                           # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg list" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Points"                           # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg pull" command
    In order to import data to Geogig
    As a Geogig User
    I want to import one or more tables from a GeoPackage file with the interchange format
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try pulling into an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table without commit message': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try pulling into an empty directory                                        # GeoPkgPull.feature:6
    Given I am in an empty directory                                                   # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg pull --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"                   # DefaultStepDefinitions.the_response_should_start_with(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Commit message not provided
java.lang.IllegalArgumentException: Commit message not provided
	at com.google.common.base.Preconditions.checkArgument(Preconditions.java:122)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:64)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(GeoPkgStepDefinitions.java:116)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table without commit message                                  # GeoPkgPull.feature:11
    Given I have a repository                                                                      # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Commit message not provided"                                 # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table that doesn't exit in the file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table                                                                            # GeoPkgPull.feature:16
    Given I have a repository                                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Import successful."                                                             # DefaultStepDefinitions.the_response_should_contain(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Unable to import: No table to import.
java.lang.IllegalStateException: No table to import.
	at com.google.common.base.Preconditions.checkState(Preconditions.java:173)
	at org.locationtech.geogig.geotools.geopkg.InterchangeFormat.importAuditLog(InterchangeFormat.java:270)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:81)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(GeoPkgStepDefinitions.java:116)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull without specifying table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table that doesn't exit in the file                                                         # GeoPkgPull.feature:21
    Given I have a repository                                                                                                    # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table nonexistant_table --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Unable to import: No table to import."                                                     # DefaultStepDefinitions.the_response_should_contain(String)
[main] WARN org.locationtech.geogig.geotools.plumbing.ImportOp - Error looking for known identifier for CRS null
org.locationtech.geogig.porcelain.CRSException: Could not find identifier associated with the defined CRS: 
GEOGCS["GCS_WGS_1985", 
  DATUM["D_WGS_1985", 
    SPHEROID["WGS_1985", 6378137.0, 298.257223563]], 
  PRIMEM["Greenwich", 0.0], 
  UNIT["degree", 0.017453292519943295], 
  AXIS["Longitude", EAST], 
  AXIS["Latitude", NORTH]]
	at org.locationtech.geogig.repository.impl.SpatialOps.findKnownCrs(SpatialOps.java:218)
	at org.locationtech.geogig.repository.impl.SpatialOps.findIdentifier(SpatialOps.java:202)
	at org.locationtech.geogig.geotools.plumbing.ImportOp.tryForceKnownCRS(ImportOp.java:281)
	at org.locationtech.geogig.geotools.plumbing.ImportOp._call(ImportOp.java:221)
	at org.locationtech.geogig.geotools.plumbing.ImportOp._call(ImportOp.java:87)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.plumbing.ImportOpTest.testForcedKnownCrsIdentifierNoMatch(ImportOpTest.java:479)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
	at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
	at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
	at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:17)
	at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:26)
	at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:27)
	at org.junit.rules.ExpectedException$ExpectedExceptionStatement.evaluate(ExpectedException.java:239)
	at org.junit.rules.ExternalResource$1.evaluate(ExternalResource.java:48)
	at org.junit.rules.RunRules.evaluate(RunRules.java:20)
	at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:325)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:78)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:57)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
Tests run: 24, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 26.985 sec - in org.locationtech.geogig.geotools.plumbing.ImportOpTest
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table with a conflict': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull without specifying table                                                       # GeoPkgPull.feature:26
    Given I have a repository                                                                          # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Import successful."                                              # DefaultStepDefinitions.the_response_should_contain(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - CONFLICT: Merge conflict in Points/Points.1
Automatic merge failed. Fix conflicts and then commit the result.

org.locationtech.geogig.geotools.geopkg.GeopkgMergeConflictsException: CONFLICT: Merge conflict in Points/Points.1
Automatic merge failed. Fix conflicts and then commit the result.

	at org.locationtech.geogig.geotools.geopkg.InterchangeFormat.importAuditLog(InterchangeFormat.java:342)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:81)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:530)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file_with_conflict(GeoPkgStepDefinitions.java:157)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)

  Scenario: Try to pull a GeoPackage table with a conflict                                                                            # GeoPkgPull.feature:31
    Given I have a repository                                                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points --message imported" on an existing interchange GeoPackage file with a conflict # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file_with_conflict(String)
    Then the response should contain "CONFLICT: Merge conflict in"                                                                    # DefaultStepDefinitions.the_response_should_contain(String)

22 Scenarios (22 passed)
71 Steps (71 passed)
0m25.986s

Tests run: 93, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 27.888 sec - in org.locationtech.geogig.geotools.cli.geopkg.RunGeoPkgFunctionalTest

Results :

Tests run: 316, Failures: 0, Errors: 0, Skipped: 0

[JENKINS] Recording test results
[INFO] 
[INFO] --- maven-jar-plugin:2.4:jar (default-jar) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT.jar
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-tests.jar
[INFO] 
[INFO] >>> maven-source-plugin:2.2.1:jar (attach-sources) > generate-sources @ geogig-geotools >>>
[INFO] 
[INFO] --- git-commit-id-plugin:2.1.8:revision (default) @ geogig-geotools ---
[WARNING] Failed to getClass for org.apache.maven.plugin.source.SourceJarMojo
[INFO] 
[INFO] <<< maven-source-plugin:2.2.1:jar (attach-sources) < generate-sources @ geogig-geotools <<<
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar (attach-sources) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-sources.jar
[INFO] 
[INFO] >>> maven-source-plugin:2.2.1:test-jar (attach-sources) > generate-sources @ geogig-geotools >>>
[INFO] 
[INFO] --- git-commit-id-plugin:2.1.8:revision (default) @ geogig-geotools ---
[WARNING] Failed to getClass for org.apache.maven.plugin.source.TestSourceJarMojo
[INFO] 
[INFO] <<< maven-source-plugin:2.2.1:test-jar (attach-sources) < generate-sources @ geogig-geotools <<<
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:test-jar (attach-sources) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-test-sources.jar
[INFO] 
[INFO] --- maven-install-plugin:2.4:install (default-install) @ geogig-geotools ---
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/pom.xml to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT.pom
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-tests.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-tests.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-sources.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-sources.jar
[INFO] Installing /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-test-sources.jar to /home/hudson/genie.geogig/.jenkins/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-test-sources.jar
[JENKINS] Archiving disabled