SuccessConsole Output

Started calculate disk usage of build
Finished Calculation of disk usage of build in 0 seconds
Started calculate disk usage of workspace
Finished Calculation of disk usage of workspace in 0 seconds
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building GeoTools Extension 1.1-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/jdbc/gt-jdbc-postgis/15.4/gt-jdbc-postgis-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/jdbc/gt-jdbc-postgis/15.4/gt-jdbc-postgis-15.4.pom (3 KB at 7.4 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/jdbc/gt-jdbc/15.4/gt-jdbc-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/jdbc/gt-jdbc/15.4/gt-jdbc-15.4.pom (4 KB at 44.5 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/postgresql/postgresql/9.4.1211/postgresql-9.4.1211.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/org/postgresql/postgresql/9.4.1211/postgresql-9.4.1211.pom
[INFO] Downloading: http://dev.mapfish.org/maven/repository/org/postgresql/postgresql/9.4.1211/postgresql-9.4.1211.pom
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/org/postgresql/postgresql/9.4.1211/postgresql-9.4.1211.pom
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/org/postgresql/postgresql/9.4.1211/postgresql-9.4.1211.pom (10 KB at 24.5 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/postgresql/pgjdbc-core-parent/1.1.1/pgjdbc-core-parent-1.1.1.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/org/postgresql/pgjdbc-core-parent/1.1.1/pgjdbc-core-parent-1.1.1.pom
[INFO] Downloading: http://dev.mapfish.org/maven/repository/org/postgresql/pgjdbc-core-parent/1.1.1/pgjdbc-core-parent-1.1.1.pom
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/org/postgresql/pgjdbc-core-parent/1.1.1/pgjdbc-core-parent-1.1.1.pom
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/org/postgresql/pgjdbc-core-parent/1.1.1/pgjdbc-core-parent-1.1.1.pom (16 KB at 120.2 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/postgresql/pgjdbc-versions/1.1.1/pgjdbc-versions-1.1.1.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/org/postgresql/pgjdbc-versions/1.1.1/pgjdbc-versions-1.1.1.pom
[INFO] Downloading: http://dev.mapfish.org/maven/repository/org/postgresql/pgjdbc-versions/1.1.1/pgjdbc-versions-1.1.1.pom
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/org/postgresql/pgjdbc-versions/1.1.1/pgjdbc-versions-1.1.1.pom
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/org/postgresql/pgjdbc-versions/1.1.1/pgjdbc-versions-1.1.1.pom (23 KB at 172.3 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/gt-jdbc/15.4/gt-jdbc-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/gt-jdbc/15.4/gt-jdbc-15.4.pom (6 KB at 14.3 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/commons-dbcp/commons-dbcp/1.4/commons-dbcp-1.4.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/commons-dbcp/commons-dbcp/1.4/commons-dbcp-1.4.pom
[INFO] Downloading: http://dev.mapfish.org/maven/repository/commons-dbcp/commons-dbcp/1.4/commons-dbcp-1.4.pom
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/commons-dbcp/commons-dbcp/1.4/commons-dbcp-1.4.pom
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/commons-dbcp/commons-dbcp/1.4/commons-dbcp-1.4.pom (11 KB at 213.2 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/commons-collections/commons-collections/3.2.2/commons-collections-3.2.2.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/commons-collections/commons-collections/3.2.2/commons-collections-3.2.2.pom
[INFO] Downloading: http://dev.mapfish.org/maven/repository/commons-collections/commons-collections/3.2.2/commons-collections-3.2.2.pom
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/commons-collections/commons-collections/3.2.2/commons-collections-3.2.2.pom
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/commons-collections/commons-collections/3.2.2/commons-collections-3.2.2.pom (13 KB at 390.7 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/apache/commons/commons-parent/39/commons-parent-39.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/org/apache/commons/commons-parent/39/commons-parent-39.pom
[INFO] Downloading: http://dev.mapfish.org/maven/repository/org/apache/commons/commons-parent/39/commons-parent-39.pom
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/org/apache/commons/commons-parent/39/commons-parent-39.pom
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/org/apache/commons/commons-parent/39/commons-parent-39.pom (61 KB at 3362.4 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/apache/apache/16/apache-16.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/org/apache/apache/16/apache-16.pom
[INFO] Downloading: http://dev.mapfish.org/maven/repository/org/apache/apache/16/apache-16.pom
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/org/apache/apache/16/apache-16.pom
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/org/apache/apache/16/apache-16.pom (16 KB at 835.3 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/jdbc/gt-jdbc-oracle/15.4/gt-jdbc-oracle-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/jdbc/gt-jdbc-oracle/15.4/gt-jdbc-oracle-15.4.pom (5 KB at 32.4 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/gt-geopkg/15.4/gt-geopkg-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/gt-geopkg/15.4/gt-geopkg-15.4.pom (7 KB at 86.0 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/unsupported/15.4/unsupported-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/unsupported/15.4/unsupported-15.4.pom (7 KB at 21.3 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/xerial/sqlite-jdbc/3.8.6/sqlite-jdbc-3.8.6.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/xerial/sqlite-jdbc/3.8.6/sqlite-jdbc-3.8.6.pom (5 KB at 54.2 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/commons-io/commons-io/2.1/commons-io-2.1.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/commons-io/commons-io/2.1/commons-io-2.1.pom
[INFO] Downloading: http://dev.mapfish.org/maven/repository/commons-io/commons-io/2.1/commons-io-2.1.pom
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/commons-io/commons-io/2.1/commons-io-2.1.pom
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/commons-io/commons-io/2.1/commons-io-2.1.pom (11 KB at 577.0 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-core/15.4/gt-xsd-core-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-core/15.4/gt-xsd-core-15.4.pom (6 KB at 36.3 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/xsd/xsd/15.4/xsd-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/xsd/xsd/15.4/xsd-15.4.pom (4 KB at 49.8 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/extension/15.4/extension-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/extension/15.4/extension-15.4.pom (3 KB at 29.0 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/gt-graph/15.4/gt-graph-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/gt-graph/15.4/gt-graph-15.4.pom (4 KB at 45.8 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/picocontainer/picocontainer/1.2/picocontainer-1.2.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/picocontainer/picocontainer/1.2/picocontainer-1.2.pom
[INFO] Downloaded: http://download.osgeo.org/webdav/geotools/picocontainer/picocontainer/1.2/picocontainer-1.2.pom (4 KB at 11.2 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/commons-jxpath/commons-jxpath/1.3/commons-jxpath-1.3.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/commons-jxpath/commons-jxpath/1.3/commons-jxpath-1.3.pom
[INFO] Downloading: http://dev.mapfish.org/maven/repository/commons-jxpath/commons-jxpath/1.3/commons-jxpath-1.3.pom
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/commons-jxpath/commons-jxpath/1.3/commons-jxpath-1.3.pom
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/commons-jxpath/commons-jxpath/1.3/commons-jxpath-1.3.pom (9 KB at 263.4 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/apache/commons/commons-parent/11/commons-parent-11.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/org/apache/commons/commons-parent/11/commons-parent-11.pom
[INFO] Downloading: http://dev.mapfish.org/maven/repository/org/apache/commons/commons-parent/11/commons-parent-11.pom
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/org/apache/commons/commons-parent/11/commons-parent-11.pom
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/org/apache/commons/commons-parent/11/commons-parent-11.pom (25 KB at 1416.0 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/eclipse/emf/common/2.6.0/common-2.6.0.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/org/eclipse/emf/common/2.6.0/common-2.6.0.pom
[INFO] Downloaded: http://download.osgeo.org/webdav/geotools/org/eclipse/emf/common/2.6.0/common-2.6.0.pom (394 B at 1.2 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/eclipse/emf/ecore/2.6.1/ecore-2.6.1.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/org/eclipse/emf/ecore/2.6.1/ecore-2.6.1.pom
[INFO] Downloaded: http://download.osgeo.org/webdav/geotools/org/eclipse/emf/ecore/2.6.1/ecore-2.6.1.pom (393 B at 1.1 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/eclipse/xsd/xsd/2.6.0/xsd-2.6.0.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/org/eclipse/xsd/xsd/2.6.0/xsd-2.6.0.pom
[INFO] Downloaded: http://download.osgeo.org/webdav/geotools/org/eclipse/xsd/xsd/2.6.0/xsd-2.6.0.pom (391 B at 1.2 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-fes/15.4/gt-xsd-fes-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-fes/15.4/gt-xsd-fes-15.4.pom (7 KB at 28.2 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/ogc/net.opengis.fes/15.4/net.opengis.fes-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/ogc/net.opengis.fes/15.4/net.opengis.fes-15.4.pom (2 KB at 15.3 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/ogc/15.4/ogc-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/ogc/15.4/ogc-15.4.pom (2 KB at 25.2 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/ogc/org.w3.xlink/15.4/org.w3.xlink-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/ogc/org.w3.xlink/15.4/org.w3.xlink-15.4.pom (567 B at 7.5 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/ogc/net.opengis.ows/15.4/net.opengis.ows-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/ogc/net.opengis.ows/15.4/net.opengis.ows-15.4.pom (781 B at 10.3 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-gml3/15.4/gt-xsd-gml3-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-gml3/15.4/gt-xsd-gml3-15.4.pom (13 KB at 115.1 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-gml2/15.4/gt-xsd-gml2-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-gml2/15.4/gt-xsd-gml2-15.4.pom (5 KB at 63.8 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-ows/15.4/gt-xsd-ows-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-ows/15.4/gt-xsd-ows-15.4.pom (4 KB at 50.6 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-filter/15.4/gt-xsd-filter-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-filter/15.4/gt-xsd-filter-15.4.pom (6 KB at 70.7 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/gt-geojson/15.4/gt-geojson-15.4.pom
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/gt-geojson/15.4/gt-geojson-15.4.pom (4 KB at 45.7 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/com/googlecode/json-simple/json-simple/1.1/json-simple-1.1.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/com/googlecode/json-simple/json-simple/1.1/json-simple-1.1.pom
[INFO] Downloading: http://dev.mapfish.org/maven/repository/com/googlecode/json-simple/json-simple/1.1/json-simple-1.1.pom
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/com/googlecode/json-simple/json-simple/1.1/json-simple-1.1.pom
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/com/googlecode/json-simple/json-simple/1.1/json-simple-1.1.pom (2 KB at 34.2 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/commons-lang/commons-lang/2.6/commons-lang-2.6.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/commons-lang/commons-lang/2.6/commons-lang-2.6.pom
[INFO] Downloading: http://dev.mapfish.org/maven/repository/commons-lang/commons-lang/2.6/commons-lang-2.6.pom
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/commons-lang/commons-lang/2.6/commons-lang-2.6.pom
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/commons-lang/commons-lang/2.6/commons-lang-2.6.pom (18 KB at 1004.9 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/apache/commons/commons-parent/17/commons-parent-17.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/org/apache/commons/commons-parent/17/commons-parent-17.pom
[INFO] Downloading: http://dev.mapfish.org/maven/repository/org/apache/commons/commons-parent/17/commons-parent-17.pom
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/org/apache/commons/commons-parent/17/commons-parent-17.pom
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/org/apache/commons/commons-parent/17/commons-parent-17.pom (31 KB at 1268.9 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/apache/apache/7/apache-7.pom
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/org/apache/apache/7/apache-7.pom
[INFO] Downloading: http://dev.mapfish.org/maven/repository/org/apache/apache/7/apache-7.pom
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/org/apache/apache/7/apache-7.pom
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/org/apache/apache/7/apache-7.pom (15 KB at 782.9 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/jdbc/gt-jdbc-postgis/15.4/gt-jdbc-postgis-15.4.jar
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/postgresql/postgresql/9.4.1211/postgresql-9.4.1211.jar
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/gt-jdbc/15.4/gt-jdbc-15.4.jar
[INFO] Downloading: https://repo.boundlessgeo.com/main/commons-dbcp/commons-dbcp/1.4/commons-dbcp-1.4.jar
[INFO] Downloading: https://repo.boundlessgeo.com/main/commons-collections/commons-collections/3.2.2/commons-collections-3.2.2.jar
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/jdbc/gt-jdbc-oracle/15.4/gt-jdbc-oracle-15.4.jar
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/jdbc/gt-jdbc-postgis/15.4/gt-jdbc-postgis-15.4.jar (50 KB at 203.6 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/gt-geopkg/15.4/gt-geopkg-15.4.jar
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/gt-geopkg/15.4/gt-geopkg-15.4.jar (94 KB at 182.8 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/xerial/sqlite-jdbc/3.8.6/sqlite-jdbc-3.8.6.jar
[INFO] Downloading: https://repo.boundlessgeo.com/main/commons-io/commons-io/2.1/commons-io-2.1.jar
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-core/15.4/gt-xsd-core-15.4.jar
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/gt-jdbc/15.4/gt-jdbc-15.4.jar (216 KB at 309.1 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/gt-graph/15.4/gt-graph-15.4.jar
[INFO] Downloading: https://repo.boundlessgeo.com/main/picocontainer/picocontainer/1.2/picocontainer-1.2.jar
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/jdbc/gt-jdbc-oracle/15.4/gt-jdbc-oracle-15.4.jar (85 KB at 105.3 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/commons-jxpath/commons-jxpath/1.3/commons-jxpath-1.3.jar
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/eclipse/emf/common/2.6.0/common-2.6.0.jar
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/eclipse/emf/ecore/2.6.1/ecore-2.6.1.jar
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/gt-graph/15.4/gt-graph-15.4.jar (167 KB at 166.8 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/eclipse/xsd/xsd/2.6.0/xsd-2.6.0.jar
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-fes/15.4/gt-xsd-fes-15.4.jar
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/ogc/net.opengis.fes/15.4/net.opengis.fes-15.4.jar
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/ogc/org.w3.xlink/15.4/org.w3.xlink-15.4.jar
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-fes/15.4/gt-xsd-fes-15.4.jar (68 KB at 51.9 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-gml3/15.4/gt-xsd-gml3-15.4.jar
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-core/15.4/gt-xsd-core-15.4.jar (307 KB at 234.3 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-gml2/15.4/gt-xsd-gml2-15.4.jar
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-gml2/15.4/gt-xsd-gml2-15.4.jar (115 KB at 75.7 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-ows/15.4/gt-xsd-ows-15.4.jar
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-ows/15.4/gt-xsd-ows-15.4.jar (119 KB at 70.3 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/ogc/net.opengis.ows/15.4/net.opengis.ows-15.4.jar
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/ogc/net.opengis.fes/15.4/net.opengis.fes-15.4.jar (227 KB at 127.3 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-filter/15.4/gt-xsd-filter-15.4.jar
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-filter/15.4/gt-xsd-filter-15.4.jar (105 KB at 52.4 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/org/geotools/gt-geojson/15.4/gt-geojson-15.4.jar
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/gt-geojson/15.4/gt-geojson-15.4.jar (63 KB at 29.3 KB/sec)
[INFO] Downloading: https://repo.boundlessgeo.com/main/com/googlecode/json-simple/json-simple/1.1/json-simple-1.1.jar
[INFO] Downloading: https://repo.boundlessgeo.com/main/commons-lang/commons-lang/2.6/commons-lang-2.6.jar
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/ogc/net.opengis.ows/15.4/net.opengis.ows-15.4.jar (520 KB at 218.2 KB/sec)
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/ogc/org.w3.xlink/15.4/org.w3.xlink-15.4.jar (52 KB at 20.9 KB/sec)
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/geotools/xsd/gt-xsd-gml3/15.4/gt-xsd-gml3-15.4.jar (1518 KB at 585.1 KB/sec)
[INFO] Downloaded: https://repo.boundlessgeo.com/main/org/xerial/sqlite-jdbc/3.8.6/sqlite-jdbc-3.8.6.jar (3856 KB at 545.2 KB/sec)
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/org/postgresql/postgresql/9.4.1211/postgresql-9.4.1211.jar
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/commons-dbcp/commons-dbcp/1.4/commons-dbcp-1.4.jar
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/commons-collections/commons-collections/3.2.2/commons-collections-3.2.2.jar
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/commons-io/commons-io/2.1/commons-io-2.1.jar
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/picocontainer/picocontainer/1.2/picocontainer-1.2.jar
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/commons-jxpath/commons-jxpath/1.3/commons-jxpath-1.3.jar
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/org/eclipse/emf/common/2.6.0/common-2.6.0.jar
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/org/eclipse/emf/ecore/2.6.1/ecore-2.6.1.jar
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/org/eclipse/xsd/xsd/2.6.0/xsd-2.6.0.jar
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/com/googlecode/json-simple/json-simple/1.1/json-simple-1.1.jar
[INFO] Downloading: http://download.osgeo.org/webdav/geotools/commons-lang/commons-lang/2.6/commons-lang-2.6.jar
[INFO] Downloaded: http://download.osgeo.org/webdav/geotools/picocontainer/picocontainer/1.2/picocontainer-1.2.jar (110 KB at 161.3 KB/sec)
[INFO] Downloaded: http://download.osgeo.org/webdav/geotools/org/eclipse/emf/common/2.6.0/common-2.6.0.jar (207 KB at 225.9 KB/sec)
[INFO] Downloaded: http://download.osgeo.org/webdav/geotools/org/eclipse/xsd/xsd/2.6.0/xsd-2.6.0.jar (970 KB at 624.7 KB/sec)
[INFO] Downloaded: http://download.osgeo.org/webdav/geotools/org/eclipse/emf/ecore/2.6.1/ecore-2.6.1.jar (1203 KB at 230.3 KB/sec)
[INFO] Downloading: http://dev.mapfish.org/maven/repository/org/postgresql/postgresql/9.4.1211/postgresql-9.4.1211.jar
[INFO] Downloading: http://dev.mapfish.org/maven/repository/commons-dbcp/commons-dbcp/1.4/commons-dbcp-1.4.jar
[INFO] Downloading: http://dev.mapfish.org/maven/repository/commons-collections/commons-collections/3.2.2/commons-collections-3.2.2.jar
[INFO] Downloading: http://dev.mapfish.org/maven/repository/commons-io/commons-io/2.1/commons-io-2.1.jar
[INFO] Downloading: http://dev.mapfish.org/maven/repository/commons-jxpath/commons-jxpath/1.3/commons-jxpath-1.3.jar
[INFO] Downloading: http://dev.mapfish.org/maven/repository/com/googlecode/json-simple/json-simple/1.1/json-simple-1.1.jar
[INFO] Downloading: http://dev.mapfish.org/maven/repository/commons-lang/commons-lang/2.6/commons-lang-2.6.jar
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/org/postgresql/postgresql/9.4.1211/postgresql-9.4.1211.jar
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/commons-dbcp/commons-dbcp/1.4/commons-dbcp-1.4.jar
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/commons-collections/commons-collections/3.2.2/commons-collections-3.2.2.jar
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/commons-io/commons-io/2.1/commons-io-2.1.jar
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/commons-jxpath/commons-jxpath/1.3/commons-jxpath-1.3.jar
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/commons-io/commons-io/2.1/commons-io-2.1.jar (160 KB at 4979.0 KB/sec)
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/com/googlecode/json-simple/json-simple/1.1/json-simple-1.1.jar
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/commons-collections/commons-collections/3.2.2/commons-collections-3.2.2.jar (575 KB at 5803.5 KB/sec)
[INFO] Downloading: https://repo.eclipse.org/content/repositories/maven_central/commons-lang/commons-lang/2.6/commons-lang-2.6.jar
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/com/googlecode/json-simple/json-simple/1.1/json-simple-1.1.jar (16 KB at 147.8 KB/sec)
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/commons-dbcp/commons-dbcp/1.4/commons-dbcp-1.4.jar (157 KB at 1438.1 KB/sec)
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/commons-jxpath/commons-jxpath/1.3/commons-jxpath-1.3.jar (293 KB at 2687.7 KB/sec)
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/commons-lang/commons-lang/2.6/commons-lang-2.6.jar (278 KB at 2256.6 KB/sec)
[INFO] Downloaded: https://repo.eclipse.org/content/repositories/maven_central/org/postgresql/postgresql/9.4.1211/postgresql-9.4.1211.jar (663 KB at 1468.6 KB/sec)
[INFO] 
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ geogig-geotools ---
[INFO] 
[INFO] --- git-commit-id-plugin:2.1.8:revision (default) @ geogig-geotools ---
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ geogig-geotools ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 2 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ geogig-geotools ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 62 source files to /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/classes
[WARNING] /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java: /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java uses unchecked or unsafe operations.
[WARNING] /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/src/main/java/org/locationtech/geogig/geotools/plumbing/ImportOp.java: Recompile with -Xlint:unchecked for details.
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ geogig-geotools ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 14 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ geogig-geotools ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 33 source files to /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes
[WARNING] /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/src/test/java/org/locationtech/geogig/geotools/test/storage/MemoryDataStoreWithProvidedFIDSupport.java: Some input files use unchecked or unsafe operations.
[WARNING] /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/src/test/java/org/locationtech/geogig/geotools/test/storage/MemoryDataStoreWithProvidedFIDSupport.java: Recompile with -Xlint:unchecked for details.
[INFO] 
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ geogig-geotools ---
[INFO] Surefire report directory: /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/surefire-reports

-------------------------------------------------------
 T E S T S
-------------------------------------------------------

-------------------------------------------------------
 T E S T S
-------------------------------------------------------
Running org.locationtech.geogig.geotools.cli.geojson.GeoJsonImportTest
Running org.locationtech.geogig.geotools.cli.geojson.GeoJsonExportTest
Running org.locationtech.geogig.geotools.cli.shp.RunShpFunctionalTest
Running org.locationtech.geogig.geotools.cli.shp.ShpExportTest
Running org.locationtech.geogig.geotools.cli.geopkg.RunGeoPkgFunctionalTest
Running org.locationtech.geogig.geotools.cli.shp.ShpImportTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgExportTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgImportTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgListTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgPullTest
Running org.locationtech.geogig.geotools.cli.geopkg.GeoPkgDescribeTest
Running org.locationtech.geogig.geotools.cli.postgis.PGDescribeTest
Running org.locationtech.geogig.geotools.cli.postgis.PGListTest
Running org.locationtech.geogig.geotools.cli.postgis.PGImportTest
Running org.locationtech.geogig.geotools.cli.postgis.PGExportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleExportTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleListTest
Running org.locationtech.geogig.geotools.plumbing.FeatureTypeAdapterFeatureSourceTest
Running org.locationtech.geogig.geotools.plumbing.ImportOpTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleDescribeTest
Running org.locationtech.geogig.geotools.cli.oracle.OracleImportTest
Running org.locationtech.geogig.geotools.plumbing.ExportOpTest
Running org.locationtech.geogig.geotools.plumbing.DescribeOpTest
Running org.locationtech.geogig.geotools.plumbing.ExportDiffOpTest
Feature: "shp export" command
    In order to export data to Geogig
    As a Geogig User
    I want to export from the repository to a shapefile
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
Feature: "geopkg describe" command
    In order to understand the structure of a table in a GeoPackage file
    As a Geogig User
    I want Geogig to describe the table
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try describing a GeoPackage table from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
Usage: geogig describe [options]
  Options:
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test6239161999693595304.gpkg
  * --table, -t
       Table to describe.
       Default: <empty string>
    --user, -U
       User name.  Default: user
       Default: user

Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 4.351 sec - in org.locationtech.geogig.geotools.plumbing.FeatureTypeAdapterFeatureSourceTest
Running org.locationtech.geogig.geotools.plumbing.ListOpTest
Importing from database database
Usage: geogig describe [options]
  Options:
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
  * --table, -t
       Table to describe.
       Default: <empty string>
    --user, -U
       User name.  Default: postgres
       Default: postgres

The shapefile '/home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp' could not be found, skipping...
The GeoJSON file 'file://nonexistent.geojson' could not be found, skipping...
Importing from shapefile /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Importing table2           (1/2)... 
Importing from database database
Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 7.613 sec - in org.locationtech.geogig.geotools.plumbing.ExportDiffOpTest
Usage: geogig import [options] <geojson> [<geojson>]...
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --geom-name
       Name to use for geometry attribute, replacing the default one
       ('geometry')
    --geom-name-auto
       Uses the name of the geometry descriptor in the destination feature type
       Default: false

Usage: geogig export [options] <path> <geojson>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test5629511947393738099.gpkg

Importing Lines            (1/2)... 

Exporting from Points to Points... 
33%
0%
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 8.048 sec - in org.locationtech.geogig.geotools.plumbing.DescribeOpTest

1 features inserted in 101.2 ms
100%
Building final tree table2...

1 features tree built in 948.9 μs
100%
Points exported successfully to Points

Exporting repository metadata from 'HEAD:Points' (commit 1d785c2de409ab3aaae9f508b95f8ba7d83f3b28)...

Creating audit metadata for table 'Points'
Importing from GeoJSON /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/geojson/sample.geojson

Exporting from WORK_HEAD:Points to Points... 

Importing feature          (1/1)... 

Exporting from Points to Points... 
33%
Importing table1           (2/2)... 
33%
67%
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 4.134 sec - in org.locationtech.geogig.geotools.plumbing.ListOpTest
100%
WORK_HEAD:Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit247551762319231681/repo-1615572612/TestPoints.geojson
67%
100%
Points exported successfully to Points

Exporting repository metadata from 'HEAD:Points' (commit 9d02a9d45cb22caf016f851072ec2dd3e89ca660)...

Creating audit metadata for table 'Points'
0%
2 features inserted in 71.34 ms

Building final tree feature...

2 features tree built in 8.939 ms
0%
100%
/home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/geojson/sample.geojson imported successfully.

3 features inserted in 70.05 ms

Building final tree Lines...

3 features tree built in 1.335 ms

Importing Points           (2/2)... 
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 9.382 sec - in org.locationtech.geogig.geotools.cli.geojson.GeoJsonImportTest
1%
3 features inserted in 22.51 ms

Building final tree Points...

3 features tree built in 41.53 ms
100%
Import successful.

Importing changes to table Points onto feature tree Points...
0%
Exporting from Points to Points... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit2946178056853476369/repo2019101312/TestPoints.geojson
Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 9.505 sec - in org.locationtech.geogig.geotools.plumbing.ExportOpTest
Fetching table...
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a feature type': Using URIBuilder DefaultTestRepoURIBuilder
Importing from database /opt/public/hipp/ramdisk/geogig/geogig_geopackage_test2199154799302701972.gpkg
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: database.gpkg
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    -i, --interchange
       Export as geogig mobile interchange format
       Default: false
    --overwrite, -o
       Overwrite output table
       Default: false
    --user, -U
       User name.  Default: user
       Default: user


Importing Points           (1/1)... 
Fetching feature types...
 - table4
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable
0%
3 features inserted in 20.63 ms

Building final tree Points...

3 features tree built in 1.206 ms
100%
Import successful.
Import successful.
Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 10.363 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgImportTest
Changes committed and merge at 3c684e6e48942d4d7930309c7bd602cb18f4d166
Fetching feature types...

Exporting from Points to Points... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit3242029398307173010/repo9707988/TestPoints.geojson

Exporting from Lines to Lines... 
33%
Lines exported successfully to /opt/public/hipp/ramdisk/geogig/junit3242029398307173010/repo9707988/TestPoints.geojson
Tests run: 6, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 10.499 sec - in org.locationtech.geogig.geotools.cli.geojson.GeoJsonExportTest
Fetching feature types...
Fetching feature types...
 - table4
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: postgres
       Default: postgres


Exporting from Points to Points... 
33%
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 10.842 sec - in org.locationtech.geogig.geotools.cli.postgis.PGListTest
100%
Points exported successfully to Points

Exporting repository metadata from 'HEAD:Points' (commit d8da73bce9892058fae7ca3136917fe5df206549)...

Creating audit metadata for table 'Points'
Fetching feature types...
Importing from database database

Exporting from WORK_HEAD:Points to Points... 
33%
100%
WORK_HEAD:Points exported successfully to Points
Importing from database database

  Scenario: Try exporting from an empty directory                    # ShpExport.feature:6
    Given I am in an empty directory                                 # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "shp export Points Points.shp"            # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should start with "Not in a geogig repository" # DefaultStepDefinitions.the_response_should_start_with(String)
Importing from database database

Exporting from WORK_HEAD:Lines to Lines... 
33%
Importing changes to table Points onto feature tree Points...
0%
Importing from database database
WORK_HEAD:Lines exported successfully to Lines
Fetching feature types...
Import successful.
Changes committed and merge at c7f37b2c4c17b45e8d67ff29ba15f5e14713f240
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to. Default: database
       Default: database
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: oracle
       Default: oracle

Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 11.308 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleListTest
Fetching table...
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Could not find the specified table.
org.locationtech.geogig.cli.CommandFailedException: Could not find the specified table.Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

Importing from database database
Fetching table...

	at org.locationtech.geogig.geotools.cli.DataStoreDescribe.runInternal(DataStoreDescribe.java:68)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:528)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
Fetching table...
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------
Table : table1
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------

Importing table2           (1/2)... 

Exporting from Points to Points... 
33%
Fetching table...
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 11.777 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleDescribeTest
100%
Points exported successfully to Points

Exporting repository metadata from 'HEAD:Points' (commit 3cf4cf42ac5b1f31f481326e6673ac59c9157d2e)...

Creating audit metadata for table 'Points'
Fetching table...
Importing from database database
The shapefile 'file://nonexistent.shp' could not be found, skipping...

Importing table2           (1/2)... 
Fetching table...
Fetching table...
Table : table1
Tests run: 8, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.199 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgDescribeTest
----------------------------------------
	Property  : label
	Type      : String
----------------------------------------
	Property  : geom
	Type      : Point
----------------------------------------

Importing changes to table Points onto feature tree Points...
0%
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try describing a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder
Fetching table...
Tests run: 8, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.374 sec - in org.locationtech.geogig.geotools.cli.postgis.PGDescribeTest
Importing from shapefile /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
0%
1 features inserted in 19.41 ms

Building final tree table2...

1 features tree built in 3.494 ms

Importing table1           (2/2)... 
Usage: geogig import [options] <shapefile> [<shapefile>]...
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --charset
       Use the specified charset to decode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --create, -c
       Only create the schema, do not actually import its features
       Default: false
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false

0%
Importing from database database
Importing from shapefile /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp
0%
Importing table4           (1/8)... 

1 features inserted in 50.16 ms

Building final tree table2...

1 features tree built in 17.18 ms

Importing table3           (2/8)... 

Importing table1           (2/2)... 
0%
1 features inserted in 2.633 ms

Building final tree table3...

1 features tree built in 661.6 μs

Importing table2           (3/8)... 
Importing from database database

Importing table1           (1/1)... 
0%
2 features inserted in 3.551 ms

Building final tree table1...

2 features tree built in 6.942 ms
100%
Import successful.

1 features inserted in 4.352 ms

Building final tree table2...
Importing from database database

1 features tree built in 15.80 ms
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.852 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgPullTest

Importing table1           (4/8)... 
Importing from database database

Importing table1           (1/1)... 

Exporting from Points to Points... 
33%
0%
2 features inserted in 4.124 ms

Building final tree table1...
0%
2 features tree built in 10.93 ms

2 features inserted in 25.20 ms

Building final tree table1...

2 features tree built in 4.534 ms
100%
Points exported successfully to Points
100%

Importing shpLikeTable2    (5/8)... 
Import successful.
Importing from database database

  Scenario: Try describing a GeoPackage table from an empty directory                    # GeoPkgDescribe.feature:6
    Given I am in an empty directory                                                     # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg describe --table test" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."               # DefaultStepDefinitions.the_response_should_contain(String)

1 features inserted in 2.550 ms

Building final tree shpLikeTable2...

1 features tree built in 657.0 μs
Importing from database database
Usage: geogig import [options]
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --all
       Import all tables.
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --database, -D
       The database to connect to. Default: database
       Default: database
    -d, --dest
       Path to import to
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --table, -t
       Table to import.
       Default: <empty string>
    --user, -U
       User name.  Default: oracle
       Default: oracle


Importing shpLikeTable     (6/8)... 
1%
1 features inserted in 2.324 ms

Building final tree shpLikeTable...

1 features tree built in 10.02 ms
Importing from database database

Importing table4           (1/8)... 
Usage: geogig import [options]
  Options:
    --add
       Do not replace or delete features on the destination path, but just add
       new ones
       Default: false
    --all
       Import all tables.
       Default: false
    --alter
       Set the path default feature type to the the feature type of imported
       features, and modify existing features to match it
       Default: false
    --database, -D
       The database to connect to.  Default: database
       Default: database
    -d, --dest
       Path to import to
    --fid-attrib
       Use the specified attribute to create the feature Id
    --force-featuretype
       Use origin feature type even if it does not match the default destination
       featuretype
       Default: false
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --table, -t
       Table to import.
       Default: <empty string>
    --user, -U
       User name.  Default: postgres
       Default: postgres


Importing table3           (2/8)... 

Importing GeoJsonLikeTa... (7/8)... 
0%
1 features inserted in 3.353 ms

Building final tree table3...

1 features tree built in 825.0 μs

Importing table2           (3/8)... 
Importing from database database

Importing table4           (1/8)... 


Importing table3           (2/8)... 
1%
1 features inserted in 1.689 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 506.9 μs
1 features inserted in 2.556 ms

Building final tree table2...

1 features tree built in 851.9 μs

Importing table1           (4/8)... 
0%
1 features inserted in 3.211 ms

Building final tree table3...

2 features inserted in 3.287 ms

Building final tree table1...

2 features tree built in 886.9 μs

1 features tree built in 2.598 ms

Importing table2           (3/8)... 

Importing GeoJsonLikeTable (8/8)... 

Importing shpLikeTable2    (5/8)... 

1 features inserted in 2.663 ms

Building final tree shpLikeTable2...

1 features tree built in 638.8 μs

1 features inserted in 2.455 ms

1 features inserted in 1.651 ms

Building final tree GeoJsonLikeTable...

1 features tree built in 653.3 μs

Building final tree table2...

1 features tree built in 933.0 μs

Importing table1           (4/8)... 

Importing shpLikeTable     (6/8)... 
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

100%

2 features inserted in 2.909 ms

Building final tree table1...
/home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/test-classes/org/locationtech/geogig/geotools/cli/shp/shape.shp imported successfully.

2 features tree built in 3.059 ms

Importing shpLikeTable2    (5/8)... 
1%
0%
1 features inserted in 2.117 ms

Building final tree shpLikeTable...
Tests run: 10, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.556 sec - in org.locationtech.geogig.geotools.cli.shp.ShpImportTest
2017-04-18T10:59:11.471-0400  SEVERE  There's code using JDBC based datastore and not disposing them. This may lead to temporary loss of database connections. Please make sure all data access code calls DataStore.dispose() before freeing all references to it

1 features tree built in 10.53 ms

1 features inserted in 24.89 ms

Building final tree shpLikeTable2...

1 features tree built in 970.4 μs

Importing GeoJsonLikeTa... (7/8)... 

1 features inserted in 2.163 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 734.9 μs

Importing shpLikeTable     (6/8)... 
Fetching feature types...

Exporting from Points to Points... 
33%
 - table4
 - table3
 - table2
 - table1
 - shpLikeTable2
 - shpLikeTable
 - GeoJsonLikeTable2
 - GeoJsonLikeTable

Importing GeoJsonLikeTable (8/8)... 
100%
Points exported successfully to Points
2017-04-18T10:59:11.587-0400  SEVERE  There's code using JDBC based datastore and not disposing them. This may lead to temporary loss of database connections. Please make sure all data access code calls DataStore.dispose() before freeing all references to it
1%
1 features inserted in 5.371 ms


1%
Exporting from Lines to Points... 
33%
1 features inserted in 1.418 ms

Building final tree GeoJsonLikeTable...
Fetching feature types...
Building final tree shpLikeTable...

1 features tree built in 3.105 ms

1 features tree built in 1.326 ms
Lines exported successfully to Points

Importing GeoJsonLikeTa... (7/8)... 
100%
Import successful.

1 features inserted in 1.656 ms

Building final tree GeoJsonLikeTable2...

1 features tree built in 4.839 ms

Importing GeoJsonLikeTable (8/8)... 
Fetching feature types...

1 features inserted in 2.697 ms

Building final tree GeoJsonLikeTable...
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.806 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgExportTest

1 features tree built in 750.2 μs
Tests run: 12, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.556 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleImportTest

Exporting from WORK_HEAD:Points to TestPoints... 
100%
Import successful.
33%
Tests run: 12, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.695 sec - in org.locationtech.geogig.geotools.cli.postgis.PGImportTest
Usage: geogig list [options]
  Options:
    --database, -D
       The database to connect to.  Default: database.gpkg
       Default: database.gpkg
    --user, -U
       User name.  Default: user
       Default: user

Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 13.853 sec - in org.locationtech.geogig.geotools.cli.geopkg.GeoPkgListTest
100%
WORK_HEAD:Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit3381786972715654540/repo-2124602209/TestPoints.shp

Exporting from Points to TestPoints... 
33%
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to describe a GeoPackage table that doesn't exit in the database': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try describing a GeoPackage table                                              # GeoPkgDescribe.feature:11
    Given I have a repository                                                              # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg describe --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Table : Points"                                      # DefaultStepDefinitions.the_response_should_contain(String)

Exporting from WORK_HEAD:Points to testTable... 
33%
Usage: geogig export [options] <path> <shapefile>
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --charset
       Use the specified charset to encode attributes. Default is ISO-8859-1.
       Default: ISO-8859-1
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --overwrite, -o
       Overwrite output file
       Default: false

100%
WORK_HEAD:Points exported successfully to testTable

Exporting from Lines to testTable... 
33%
Lines exported successfully to testTable

Exporting from Points to TestPoints... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit4279499360360208827/repo-1188431340/TestPoints.shp
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Could not find the specified table.
org.locationtech.geogig.cli.CommandFailedException: Could not find the specified table.
	at org.locationtech.geogig.geotools.cli.DataStoreDescribe.runInternal(DataStoreDescribe.java:68)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:528)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)

Exporting from Points to Points... 
33%
100%
Points exported successfully to Points

Exporting from WORK_HEAD:Points to testTable... 
33%
  Scenario: Try to describe a GeoPackage table that doesn't exit in the database                      # GeoPkgDescribe.feature:16
    Given I have a repository                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg describe --table nonexistant_table" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."                            # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg export" command
    In order to export data to Geogig
    As a Geogig User
    I want to export from the repository into a GeoPackage file
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
100%
WORK_HEAD:Points exported successfully to testTable

Exporting from Lines to testTable... 
33%
Lines exported successfully to testTable

Exporting from Points to TestPoints... 
33%
100%
Points exported successfully to /opt/public/hipp/ramdisk/geogig/junit6510782351541007819/repo-297274204/TestPoints.shp

Exporting from Lines to TestPoints... 
33%
Lines exported successfully to /opt/public/hipp/ramdisk/geogig/junit6510782351541007819/repo-297274204/TestPoints.shp
Tests run: 10, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 15.008 sec - in org.locationtech.geogig.geotools.cli.shp.ShpExportTest
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to. Default: database
       Default: database
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --estimated_extents
       Use spatial index information to quickly get an estimate of the data
       bounds. Default: true
       Default: true
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --geometry_metadata_table
       Geometry metadata table
       Default: <empty string>
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --loose_bbox
       Perform only primary filter on bbox. Default: true
       Default: true
    --overwrite, -o
       Overwrite output table
       Default: false
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 1521
       Default: 1521
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: oracle
       Default: oracle

Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 14.772 sec - in org.locationtech.geogig.geotools.cli.oracle.OracleExportTest

Exporting from Points to Points... 
33%
100%
Points exported successfully to Points
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a feature type': Using URIBuilder DefaultTestRepoURIBuilder
Usage: geogig export [options] [<commit-ish>:]<path> <table> (define source feature type tree and target table name)
  Options:
    --alter
       Export all features if several types are found, altering them to adapt to
       the output feature type
       Default: false
    --database, -D
       The database to connect to.  Default: database
       Default: database
    --defaulttype
       Export only features with the tree default feature type if several types
       are found
       Default: false
    --featuretype
       Export only features with the specified feature type if several types are
       found
    --host, -H
       Machine name or IP address to connect to. Default: localhost
       Default: localhost
    --overwrite, -o
       Overwrite output table
       Default: false
    --password, -W
       Password.  Default: <no password>
       Default: <empty string>
    --port, -P
       Port number to connect to.  Default: 5432
       Default: 5432
    --schema, -S
       The database schema to access.  Default: public
       Default: public
    --user, -U
       User name.  Default: postgres
       Default: postgres

Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 15.064 sec - in org.locationtech.geogig.geotools.cli.postgis.PGExportTest

  Scenario: Try exporting from an empty directory                                 # GeoPkgExport.feature:6
    Given I am in an empty directory                                              # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg export Points Points" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository:"             # DefaultStepDefinitions.the_response_should_start_with(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting an inexistent feature type': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting a feature type                                          # ShpExport.feature:11
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                        # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "shp export -o Points Points.shp"                      # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting an inexistent feature type': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting an inexistent feature type                                      # ShpExport.feature:17
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "shp export WRONGTABLE Points.shp"                             # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "pathspec 'WRONGTABLE' did not match any valid path" # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting a feature type                                               # GeoPkgExport.feature:11
    Given I have a repository                                                          # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                             # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export -o Points MyPoints" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "Points exported successfully to MyPoints"        # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types using the default feature type': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting to a table that already exists': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting with mixed feature types                                                    # ShpExport.feature:23
    Given I have a repository                                                                         # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                                        # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o Points Points.shp"                                          # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "The selected tree contains mixed feature types"                 # DefaultStepDefinitions.the_response_should_contain(String)
    And the response should contain "Use --defaulttype or --featuretype <feature_type_ref> to export" # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting an inexistent feature type                                      # GeoPkgExport.feature:17
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export WRONGTABLE Points" on a new GeoPackage file     # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "pathspec 'WRONGTABLE' did not match any valid path" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting with mixed feature types using --alter': Using URIBuilder DefaultTestRepoURIBuilder
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - The selected table already exists. Use -o to overwrite
org.locationtech.geogig.cli.CommandFailedException: The selected table already exists. Use -o to overwrite
	at org.locationtech.geogig.geotools.cli.DataStoreExport.exportInternal(DataStoreExport.java:134)
	at org.locationtech.geogig.geotools.cli.DataStoreExport.runInternal(DataStoreExport.java:99)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgExport.runInternal(GeopkgExport.java:75)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:528)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(GeoPkgStepDefinitions.java:79)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a table from HEAD': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting with mixed feature types using the default feature type # ShpExport.feature:30
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                    # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o --defaulttype Points Points.shp"        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting to a table that already exists                                      # GeoPkgExport.feature:23
    Given I have a repository                                                                 # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                    # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "geopkg export Points Points" on an existing GeoPackage file       # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "The selected table already exists. Use -o to overwrite" # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try exporting a table from HEAD': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try exporting with mixed feature types using --alter                  # ShpExport.feature:36
    Given I have a repository                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I have several feature types in a path                                    # GeoToolsStepDefinitions.I_have_several_feature_types_in_a_path()
    When I run the command "shp export -o --defaulttype Points Points.shp"        # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to Points.shp" # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try exporting a table from HEAD                                                       # GeoPkgExport.feature:29
    Given I have a repository                                                                     # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                        # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "commit -m TestCommit"                                                 # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "geopkg export -o HEAD:Points CommitedPoints" on a new GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_a_new_GeoPackage_file(String)
    Then the response should contain "Points exported successfully to CommitedPoints"             # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg import" command
    In order to import data to Geogig
    As a Geogig User
    I want to import one or more tables from a GeoPackage file
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try importing into an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try importing into an empty directory                                        # GeoPkgImport.feature:6
    Given I am in an empty directory                                                     # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg import --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"                     # DefaultStepDefinitions.the_response_should_start_with(String)

  Scenario: Try exporting a table from HEAD                                               # ShpExport.feature:42
    Given I have a repository                                                             # DefaultStepDefinitions.I_have_a_repository()
    And I stage 6 features                                                                # DefaultStepDefinitions.I_stage_6_features()
    When I run the command "commit -m TestCommit"                                         # DefaultStepDefinitions.I_run_the_command_X(String)
    When I run the command "shp export -o HEAD:Points CommitedPoints.shp"                 # DefaultStepDefinitions.I_run_the_command_X(String)
    Then the response should contain "Points exported successfully to CommitedPoints.shp" # DefaultStepDefinitions.the_response_should_contain(String)

7 Scenarios (7 passed)
29 Steps (29 passed)
0m18.303s

Tests run: 36, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 19.738 sec - in org.locationtech.geogig.geotools.cli.shp.RunShpFunctionalTest
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a full GeoPackage file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a GeoPackage table                                             # GeoPkgImport.feature:11
    Given I have a repository                                                            # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Import successful."                                # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import a GeoPackage table that doesn't exit in the file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a full GeoPackage file                                # GeoPkgImport.feature:16
    Given I have a repository                                                   # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --all" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Import successful."                       # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import without specifying table or -all': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import a GeoPackage table that doesn't exit in the file                          # GeoPkgImport.feature:21
    Given I have a repository                                                                       # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table nonexistant_table" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Could not find the specified table."                          # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to import with table and -all': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to import without specifying table or -all                                               # GeoPkgImport.feature:26
    Given I have a repository                                                                            # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import" on an existing GeoPackage file                                # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "No tables specified for import. Specify --all or --table <table>." # DefaultStepDefinitions.the_response_should_contain(String)

  Scenario: Try to import with table and -all                                                  # GeoPkgImport.feature:31
    Given I have a repository                                                                  # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg import --table Points --all" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Specify --all or --table <table>, both cannot be set."   # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg list" command
    In order to know all of the features available in a GeoPackage file
    As a Geogig User
    I want to list all of the features
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try listing from an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try listing from a valid directory': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try listing from an empty directory                         # GeoPkgList.feature:6
    Given I am in an empty directory                                    # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg list" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"    # DefaultStepDefinitions.the_response_should_start_with(String)

  Scenario: Try listing from a valid directory                          # GeoPkgList.feature:11
    Given I have a repository                                           # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg list" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should contain "Points"                           # DefaultStepDefinitions.the_response_should_contain(String)
Feature: "geopkg pull" command
    In order to import data to Geogig
    As a Geogig User
    I want to import one or more tables from a GeoPackage file with the interchange format
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try pulling into an empty directory': Using URIBuilder DefaultTestRepoURIBuilder
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table without commit message': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try pulling into an empty directory                                        # GeoPkgPull.feature:6
    Given I am in an empty directory                                                   # DefaultStepDefinitions.I_am_in_an_empty_directory()
    When I run the command "geopkg pull --table Points" on an existing GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_GeoPackage_file(String)
    Then the response should start with "Not in a geogig repository"                   # DefaultStepDefinitions.the_response_should_start_with(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Commit message not provided
java.lang.IllegalArgumentException: Commit message not provided
	at com.google.common.base.Preconditions.checkArgument(Preconditions.java:122)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:64)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:528)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(GeoPkgStepDefinitions.java:116)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table without commit message                                  # GeoPkgPull.feature:11
    Given I have a repository                                                                      # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Commit message not provided"                                 # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table that doesn't exit in the file': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table                                                                            # GeoPkgPull.feature:16
    Given I have a repository                                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Import successful."                                                             # DefaultStepDefinitions.the_response_should_contain(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - Unable to import: No table to import.
java.lang.IllegalStateException: No table to import.
	at com.google.common.base.Preconditions.checkState(Preconditions.java:173)
	at org.locationtech.geogig.geotools.geopkg.InterchangeFormat.importAuditLog(InterchangeFormat.java:270)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:81)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:528)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(GeoPkgStepDefinitions.java:116)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull without specifying table': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull a GeoPackage table that doesn't exit in the file                                                         # GeoPkgPull.feature:21
    Given I have a repository                                                                                                    # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table nonexistant_table --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Unable to import: No table to import."                                                     # DefaultStepDefinitions.the_response_should_contain(String)
[main] INFO org.locationtech.geogig.cli.test.functional.DefaultStepDefinitions - 'Try to pull a GeoPackage table with a conflict': Using URIBuilder DefaultTestRepoURIBuilder

  Scenario: Try to pull without specifying table                                                       # GeoPkgPull.feature:26
    Given I have a repository                                                                          # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --message imported" on an existing interchange GeoPackage file # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file(String)
    Then the response should contain "Import successful."                                              # DefaultStepDefinitions.the_response_should_contain(String)
[main] ERROR org.locationtech.geogig.cli.GeogigCLI - CONFLICT: Merge conflict in Points/Points.1
Automatic merge failed. Fix conflicts and then commit the result.

org.locationtech.geogig.geotools.geopkg.GeopkgMergeConflictsException: CONFLICT: Merge conflict in Points/Points.1
Automatic merge failed. Fix conflicts and then commit the result.

	at org.locationtech.geogig.geotools.geopkg.InterchangeFormat.importAuditLog(InterchangeFormat.java:342)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:81)
	at org.locationtech.geogig.geotools.geopkg.GeopkgAuditImport._call(GeopkgAuditImport.java:23)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.cli.geopkg.GeopkgPull.runInternal(GeopkgPull.java:67)
	at org.locationtech.geogig.cli.AbstractCommand.run(AbstractCommand.java:68)
	at org.locationtech.geogig.cli.GeogigCLI.executeInternal(GeogigCLI.java:528)
	at org.locationtech.geogig.cli.GeogigCLI.execute(GeogigCLI.java:367)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:159)
	at org.locationtech.geogig.cli.test.functional.CLIContext.runCommand(CLIContext.java:153)
	at org.locationtech.geogig.geotools.cli.geopkg.GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file_with_conflict(GeoPkgStepDefinitions.java:157)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at cucumber.runtime.Utils$1.call(Utils.java:37)
	at cucumber.runtime.Timeout.timeout(Timeout.java:13)
	at cucumber.runtime.Utils.invoke(Utils.java:31)
	at cucumber.runtime.java.JavaStepDefinition.execute(JavaStepDefinition.java:38)
	at cucumber.runtime.StepDefinitionMatch.runStep(StepDefinitionMatch.java:37)
	at cucumber.runtime.Runtime.runStep(Runtime.java:299)
	at cucumber.runtime.model.StepContainer.runStep(StepContainer.java:44)
	at cucumber.runtime.model.StepContainer.runSteps(StepContainer.java:39)
	at cucumber.runtime.model.CucumberScenario.run(CucumberScenario.java:44)
	at cucumber.runtime.junit.ExecutionUnitRunner.run(ExecutionUnitRunner.java:91)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:63)
	at cucumber.runtime.junit.FeatureRunner.runChild(FeatureRunner.java:18)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.runtime.junit.FeatureRunner.run(FeatureRunner.java:70)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:93)
	at cucumber.api.junit.Cucumber.runChild(Cucumber.java:37)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at cucumber.api.junit.Cucumber.run(Cucumber.java:98)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)

  Scenario: Try to pull a GeoPackage table with a conflict                                                                            # GeoPkgPull.feature:31
    Given I have a repository                                                                                                         # DefaultStepDefinitions.I_have_a_repository()
    When I run the command "geopkg pull --table Points --message imported" on an existing interchange GeoPackage file with a conflict # GeoPkgStepDefinitions.I_run_the_command_on_an_existing_interchange_GeoPackage_file_with_conflict(String)
    Then the response should contain "CONFLICT: Merge conflict in"                                                                    # DefaultStepDefinitions.the_response_should_contain(String)

22 Scenarios (22 passed)
71 Steps (71 passed)
0m22.115s

Tests run: 93, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 24.175 sec - in org.locationtech.geogig.geotools.cli.geopkg.RunGeoPkgFunctionalTest
[main] WARN org.locationtech.geogig.geotools.plumbing.ImportOp - Error looking for known identifier for CRS null
org.locationtech.geogig.porcelain.CRSException: Could not find identifier associated with the defined CRS: 
GEOGCS["GCS_WGS_1985", 
  DATUM["D_WGS_1985", 
    SPHEROID["WGS_1985", 6378137.0, 298.257223563]], 
  PRIMEM["Greenwich", 0.0], 
  UNIT["degree", 0.017453292519943295], 
  AXIS["Longitude", EAST], 
  AXIS["Latitude", NORTH]]
	at org.locationtech.geogig.repository.impl.SpatialOps.findKnownCrs(SpatialOps.java:218)
	at org.locationtech.geogig.repository.impl.SpatialOps.findIdentifier(SpatialOps.java:202)
	at org.locationtech.geogig.geotools.plumbing.ImportOp.tryForceKnownCRS(ImportOp.java:281)
	at org.locationtech.geogig.geotools.plumbing.ImportOp._call(ImportOp.java:221)
	at org.locationtech.geogig.geotools.plumbing.ImportOp._call(ImportOp.java:87)
	at org.locationtech.geogig.repository.AbstractGeoGigOp.call(AbstractGeoGigOp.java:154)
	at org.locationtech.geogig.geotools.plumbing.ImportOpTest.testForcedKnownCrsIdentifierNoMatch(ImportOpTest.java:479)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
	at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
	at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
	at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:17)
	at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:26)
	at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:27)
	at org.junit.rules.ExpectedException$ExpectedExceptionStatement.evaluate(ExpectedException.java:239)
	at org.junit.rules.ExternalResource$1.evaluate(ExternalResource.java:48)
	at org.junit.rules.RunRules.evaluate(RunRules.java:20)
	at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:325)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:78)
	at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:57)
	at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
	at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
	at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
	at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
	at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
	at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
	at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264)
	at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153)
	at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
Tests run: 24, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 25.202 sec - in org.locationtech.geogig.geotools.plumbing.ImportOpTest

Results :

Tests run: 316, Failures: 0, Errors: 0, Skipped: 0

[JENKINS] Recording test results
[INFO] 
[INFO] --- maven-jar-plugin:2.4:jar (default-jar) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT.jar
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-tests.jar
[INFO] 
[INFO] >>> maven-source-plugin:2.2.1:jar (attach-sources) > generate-sources @ geogig-geotools >>>
[INFO] 
[INFO] --- git-commit-id-plugin:2.1.8:revision (default) @ geogig-geotools ---
[WARNING] Failed to getClass for org.apache.maven.plugin.source.SourceJarMojo
[INFO] 
[INFO] <<< maven-source-plugin:2.2.1:jar (attach-sources) < generate-sources @ geogig-geotools <<<
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar (attach-sources) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-sources.jar
[INFO] 
[INFO] >>> maven-source-plugin:2.2.1:test-jar (attach-sources) > generate-sources @ geogig-geotools >>>
[INFO] 
[INFO] --- git-commit-id-plugin:2.1.8:revision (default) @ geogig-geotools ---
[WARNING] Failed to getClass for org.apache.maven.plugin.source.TestSourceJarMojo
[INFO] 
[INFO] <<< maven-source-plugin:2.2.1:test-jar (attach-sources) < generate-sources @ geogig-geotools <<<
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:test-jar (attach-sources) @ geogig-geotools ---
[INFO] Building jar: /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-test-sources.jar
[INFO] 
[INFO] --- maven-install-plugin:2.4:install (default-install) @ geogig-geotools ---
[INFO] Installing /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT.jar to /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT.jar
[INFO] Installing /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/pom.xml to /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT.pom
[INFO] Installing /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-tests.jar to /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-tests.jar
[INFO] Installing /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-sources.jar to /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-sources.jar
[INFO] Installing /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/src/geotools/target/geogig-geotools-1.1-SNAPSHOT-test-sources.jar to /home/hudson/genie.geogig/.hudson/jobs/geogig-1.1.x/workspace/.repository/org/locationtech/geogig/geogig-geotools/1.1-SNAPSHOT/geogig-geotools-1.1-SNAPSHOT-test-sources.jar
[JENKINS] Archiving disabled